Zanussi fls402, fls502, fls602 USER MANUAL

WASHING MACHINE
PRALKA AUTOMATYCZNA
AUTOMATA MOSÓGÉP
AUTOMATICKÉ PRAČKY
AUTOMATICKÁ PRÁČKA
FLS 402 - FLS 502 - FLS 602
INSTRUCTION BOOKLET
HASZNÁLATI ÚTMUTATÓ
NÁVOD K OBSLUZE
NÁVOD NA OBSLUHU
35.292.620/0
2
DIMENSIONS Width 60 cm
Height 85 cm Depth 55 cm
ELECTRICAL CONNECTION Voltage 220...230 V 50Hz
Max.Power Absorbed 2200 W(10A)
WATER PRESSURE Minimum 5N/cm
2
Maximum 80N/cm
2
NOMINAL LOAD Cotton, Linen 4,5 kg
Synthetics delicate fabrics 2 kg Wool 1 kg
SPIN SPEED FLS 402 400 r.p.m.
Maximum FLS 502 500 r.p.m.
FLS 602 600 r.p.m.
This appliance marked “CE” complies with the directives:
-89/336/CEE on electro magnetic compatibility.
-73/23/CEE on electric material designed to be used with certain power limits.
CONTENTS
TECHNICAL SPECIFICATIONS
Technical specifications.......................................................................................................................................... Pág. 2
Warnings ................................................................................................................................................................... Pág. 3
Unpacking and installation...................................................................................................................................... Pág. 4
Transit security bars............................................................................................................................................. Pág. 4
Hydraulic connection ............................................................................................................................................ Pág. 4
Levelling............................................................................................................................................................... Pág. 5
Electrical connection............................................................................................................................................ Pág. 5
Descriptions of the controls.................................................................................................................................... Pág. 6
Control panel ........................................................................................................................................................ Pág. 6
Use of controls ......................................................................................................................................................... Pág. 6
Washing powder dispenser.................................................................................................................................. Pág. 6
On/off lamp........................................................................................................................................................... Pág. 6
«no spinning» button............................................................................................................................................ Pág. 6
«1/2 load» button ................................................................................................................................................. Pág. 6
Temperature selector........................................................................................................................................... Pág. 6
Program selector .................................................................................................................................................. Pág. 6
How to use controls detergent and additives ....................................................................................................... Pág. 7
Loading the washing machine ............................................................................................................................. Pág. 7
Dose the washing powder.................................................................................................................................... Pág. 7
Dose the additives................................................................................................................................................ Pág. 7
Select the temperature......................................................................................................................................... Pág. 7
Select the program............................................................................................................................................... Pág. 7
Start...................................................................................................................................................................... Pág. 7
Stop...................................................................................................................................................................... Pág. 7
Programs for cotton and linen................................................................................................................................ Pág. 8
Programmes for synthetics, mixed and wool........................................................................................................ Pág. 8
Washing hints........................................................................................................................................................... Pág. 9
Load the washing machine.................................................................................................................................. Pág. 9
Temperatures....................................................................................................................................................... Pág. 9
Table of symbols...................................................................................................................................................... Pág. 9
Maintenance and cleaning....................................................................................................................................... Pág. 10
External cleaning.................................................................................................................................................. Pág. 10
Cleaning the dispenser drawer and the recess ................................................................................................... Pág. 10
Cleaning the drain filter........................................................................................................................................ Pág. 10
Cleaning the water inlet hose filter....................................................................................................................... Pág. 10
The dangers of freezing....................................................................................................................................... Pág. 10
Servicing.................................................................................................................................................................... Pág. 11
3
ENGLISH
WARNINGS
Children must not be allowed to temper with the controls or play with the product.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning of the machine. Contact
your local Service Centre. Always insist on genuine spare parts.
This product must be serviced by an authorised Service Centre, and only genuine spare parts should be used.
Do not try to repair the appliance yourself.
The appliance is heavy. Care should be taken when moving it. Do NOT hold yourself on the controls.
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified
electrician and/or plumber or competent person.
It is dangerous to alter the specifications or attempt to modify this product in any way.
Pets have been known to climb into washing machines. Please check your drum before use.
Only wash fabrics which are designed to be machine washed. If in doubt, consult the manufacturer of that
item.
Before washing ensure that all pockets are empty and buttons and zips are fastened.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause
extensive damage and must not be placed into the appliance nor left in the pockets.
Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grease before washing.
Garments which have been in contact with volatile petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken to ensure that the garment is dry before placing in the washing machine.
Wash small items such as socks, laces, washable belts , etc. in a washing bag or pillow case as it is possible for
such items to slip down between the tub and the inner drum.
Only wash the advised quantity of delicate fabrics. Damage to the fabric can ensure if you over-fill. Refer to
the manufacturer’s recommendations of quantities.
Do not overload the appliance, see the relevant WASHING PROGRAM section.
The glass door becomes very hot during the wash cycle. Keep children away from the appliance whilst it is in
operation.
Before opening the door look through the “window” to check if the water has been drained. Should there be
water do not open before draining. If in doubt read section “INSTRUCTIONS FOR USE”.
Always unplug the appliance and turn off the water after use.
Leave the porthole slightly ajar between washes to preserve the door seal.
Unplug the appliance before cleaning.
All packing and transit bolts must be removed before
use.
Serious damage can occur to the product and to property if this has not been adhered to. See relevant
section (unpacking) in the instruction booklet.
The washing machine must be unplugged when removing the interior transit bolts. Do not plug the
appliance before finishing the removal of the transit bolts and the fixing of the caps in the holes where the security bolts were.
If the appliance is to stand on a carpeted floor make sure that there is space between the carpet and the
supporting feet of the appliance for the air to circulate freely around .
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. YOU MUST READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
It is most important that this instruction book should always be at hand for the user for reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
CHECK THE APPLIANCE UPON RECEPTION AND SHOULD ANY DAMAGE BE OBSERVED CALL YOUR DISTRIBUTER BEFORE YOU MAKE IT WORK.
4
UNPACKING AND INSTALLATION
TRANSIT SECURITY BARS
Before starting the machine up, the transport security bars must be removed as follows:
You are advised to keep all the transport security bars in case the appliance has to be transported again.
1. Unscrew and remove the three rear screws by means of a key.
2. Lean the appliance back on the rear and fit one of the polystyrene angles between the appliance and the floor.
Make sure the hoses are not squashed.
3. Carefully remove the plastic bags on the right and the left, pulling them to the centre of the appliance.
4. Place the machine in an upright position and remove the three plastic bolts.
5. Plug the 3 holes with the plastic plugs which you can find in the envelope containing the instruction booklet.
HYDRAULIC CONNECTION
There should be a COLD WATER tap near the washing machine with a screwing on connection pipe of 3/4 gas for the water supply, a sink, a wash basin or a drainage system in the wall.
Previously check if: — it is not a hot water tap.
the running water is clean. If not, run off a
reasonable amount of water to flush out any debris that may have collected in the pipes.
Have the permanent drainage system in the wall checked by a plumber.
Place the enclosed rubber joint, delivered in a plastic bag together with the appliance (A), at the very end of the inlet hose and carefully screw the pipe to the tap taking care not to damage the screwdrive and fix the nut well on to the end in order to avoid leaking.
If necessary turn the hose adequately by unscrewing the nut at the rear of the appliance.
Now tighten the nut anew to avoid leaks. (Open the tap and asure that it does not leak and close it again.)
Place the discharging hose in a washbasin or sink with the aid of the bent piece delivered separately. The bent piece has to be entered into the tube’s mouth in order to assure the support. Aforesaid piece allows the hose to be fixed to the wall by means of an opening on the upper part and that way the hose does not move and its falling is avoided.
Loading...
+ 8 hidden pages