Zanussi FL401 User Manual

WASHING MACHINE
LAVE-LINGE
FL 401
1
2
3
5
6
7
9
1 0
1 1
1
2
1 3
FLS-472C
30º- 60º 30º- 60º 30º- 40º 30º- 40º
7 8 9 10
1 2 2 3
40º- 90º 40º- 90º 30º- 60º 30º- 40º
4 5 6
11 12 13
8
INSTRUCTION BOOKLET
NOTICE D'UTILISATION
35.292.673/0
2
Installation
This appliance is heavy. Care should be taken when
moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
The washing machine must be unplugged when removing the interior transits bolts. Do not plug the appliance before finishing the removal of the transit bolts and the fixing of the caps in the holes where the security bolts were
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into washing machines. Please check your drum before use.
The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.
Keep all packaging well away for children.
Keep all detergents in a safe place out of children’s reach.
Use
Always unplug the appliance and turn off the water after use.
Do not overload the appliance. See relevant section in instruction book.
Always look through the glass door to check if water has drained before opening the door before draining the water. If in doubt, refer to your instruction book
The user should always check that they have not left their gas lighter (disposable or otherwise) in their clothing
Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.
Leave the porthole door slightly ajar between washes to preserve the door seal.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Centre. Always insist on genuine Zanussi spare parts.
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
CHECK THE APPLIANCE UPON RECEPTION AND SHOULD ANY DAMAGE BE OBSERVED CALL YOUR RETAILER BEFORE YOU MAKE IT WORK.
ENGLISH
3
Table of Contents
For the User
Important Safety Information
2
Description of the Appliance
4
The Control Panel
5
Operating sequence
6-7
Before the first use 6 Load the laundry 6 Measure out the detergent 6 Measure out the additives 6 Select the required programme 7 Start the machine 7 At the end of the programme 7
Washing Programmes
8-9
Washing Hints
10-11
International wash code symbols
12
Maintenance
13-14
Bodywork 13 Detergent dispenser drawer 13 Water inlet filter 13 Drain filter 14 Emergency emptying out 14 The dangers of freezing 14
Something Not Working
15
For the Installer
Installation Instructions
16
Technical Specifications
16
Installation
17
Unpacking 17 Water inlet 18 Water drainage 18-19 Levelling 19 Special conditions 19 Electrical connections 20 Permanent connection 20
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips
How do we help to protect the environment?
We use recycled paper!
i
4
1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 “Options” buttons 5 Program selector dial & ON/OFF switch 6 Door opening handle 7 Filter 8 Adjustable feet
Detergent dispenser drawer
<<prewash>> symbol shows the compartment for the prewash detergent.
<<wash>> symbol shows the compartment for the washing detergent.
<<smooth>> symbol shows the compartment the smoothing additives.
Description of the Appliance
1
3
4
5
6
7
8
2
1
2
3
4
5
6
7
9
1 0
1 1
12
1 3
FLS-472C
30º- 60º 30º- 60º 30º- 40º 30º- 40º
7 8 9 10
1 2 2 3
40º- 90º 40º- 90º 30º- 60º 30º- 40º
4 5 6
11 12 13
8
AL035
ENGLISH
5
The Control Panel
1 Programme Guide
2 ON/OFF LAMP
It lights when the appliance is operating.
3 “NO SPINNING” BUTTON
Available only for programmes A to H. Pressing this button before starting the programmes for
cotton and linen all spinnings will be excluded. The other steps of the program remain unchanged.
4 “COLD WASH” BUTTON
Pressing this button when starting any program it will be run through with cold water. All other features of the program as intensity and duration remain unchanged. Advisable for synthetic and delicate fabrics: curtains, stores and other not too dirty fabrics.
5 PROGRAM SELECTOR
To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program (reference mark on the control panel). If at any chance you pass by the required letter NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required letter is reached again.
40º- 90º
1
40º- 90º
2
30º- 60º
2
30º- 40º
3
4 5 6
7
30º- 60º
8
30º- 60º
9
30º- 40º
10
30º- 40º
1 2 3 4 5
11 12 13
1
13
2
12
6
Operating Sequence
Before your first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
1. Load the laundry
Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door. Do not overload the washing machine, but always try
to use it utmost capacity in accordance with the type of fabric. Reduce the quantity when washing very dirty or fluffy laundry.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the main wash compartment .
If you wish to carry out a prewash (*), pour detergent into the appropriate compartment marked .
(*) Prewash is available in programme “A”.
3. Measure out the additive
If you wish to use additives enter the softener in the compartment with the symbol
.
Never exceed the MAX level
i
P0004
AL025
AL023
Loading...
+ 14 hidden pages