Zanussi FJD 1266 W User Manual

WASHING MACHINE

SYNTHETICS

DELICATES

COTTONS

WOOL

60°C
50°C

90°C

40°C

1200
900
700
500

RINSE
HOLD

S

T

A

R

T

/

P

A

U

S

E

R

E

S

E

T

DELA

Y

STA

RT

FJD1266 W

SKIP

IRON DRY

HAND
WASH

PREWASH

EXTRA
RINSE

QUICK
WASH

F

A

B

R

I

C

S

O

P

T

I

O

N

S

S

P

I

N

S

P

E

E

D

T

E

M

P

E

R

A

T

U

R

E

A

U

T

O

D

R

Y

30°C

STORE DRY

O

N

/

O

F

F

FJD 1266 W
FJD 1466 W
FJD 1466 S

132994370

INSTRUCTION BOOKLET

GB

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move
house and leave the appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the appliance and the relevant
warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully
before installing or using the appliance.

Installation

●

This appliance is heavy. Care should be taken when
moving it.

●

It is dangerous to alter the specifications or attempt
to modify this product in any way.

●

All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.

●

Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.

●

Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.

●

Care must be taken to ensure that the appliance does
not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.

Child Safety

●

This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.

●

Pets and children have been known to climb into
washing machines. Please check your drum before
use.

●

The glass door becomes very hot during the washing
cycle. Keep children away from the vicinity of the
appliance whilst it is in operation.

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s

●

reach.

Use

●

Always unplug the appliance and turn off the water
supply after use.

●

Do not overload the appliance. See relevant section
in the instruction book.

●

Only wash fabrics which are designed to be machine
washed. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.

●

Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.

●

Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.

●

Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill.
Refer to the manufacturer’s recommendations of
quantities.

●

As some duvets and eiderdowns should be washed
in large commercial machines because of their bulk,
please check with the manufacturer of the item
before washing in a domestic machine.

●

Leave the porthole door slightly ajar between washes
to preserve the door seal.

●

Under no circumstances should you attempt to repair
the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Zanussi Service
Force Centre. Always insist on genuine Zanussi
spare parts.

2

Contents

For the User

Important Safety Information
Your New Washing Machine
Description of the Appliance

Door locked light 5
Detergent dispenser drawer 5
Child safety feature 5

The Control Panel

Turning the acoustic signal off 6

Operating sequence

Load the laundry 10
Measure out the detergent 10
Measure out the fabric softener 10
Switch the machine on 10
Select the required programme/fabric 10
Select the temperature 11
Select the spin speed or the NIGHT WASH option 11
Select the desired options 11
Select the SUPER RINSE or AA40° option 11
Select the DELAY START 11
Start the programme 11
How to change a programme during its cycle 12
How to cancel a programme during its cycle 12
How to open the door during the cycle of
a programme 12
End of programme 12

6-9

10-12

Something Not Working
Service and Spare Parts

2

Zanussi Guarantee Conditions

4

5

For the Installer

Installation Instructions
Technical Specifications

Unpacking 23
Positioning 23
Water inlet 24
Water drainage 24-25
Levelling 25
Special conditions 25
In the interest of the environment 25
Electrical connection 26

19-20

20

21

22

22

Washing Hints

Which detergent?.... 14

And in which form? 14

Wash Care Symbols
Washing Programmes
Maintenance and Cleaning

Descaling 17
After each wash 17
Maintenance Wash 17
External cleaning 17
Cleaning the dispenser drawer 17
Cleaning the drawer recess 17
Cleaning the filter 17-18
The dangers of freezing 18

13-14

15

16

17-18

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions
Hints and tips
Environmental information

3

Your New Washing Machine

Your new washing machine, fitted with the Zanussi “JET SYSTEM”, meets all modern
requirements for effective treatment of laundry with low water, energy and detergent
consumption.

Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

before draining, with the 90°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.

●

The special wool programme with its new delicate
wash system treats your woollens with extreme care.

●

The anti-unbalance device ensures that the washing
machine remains stable when spinning.

Ecological hints

To save water and energy and help protect the
environment, we recommend that you follow these
hints:

●

Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).

●

The machine works more economically if it is fully
loaded.

●

With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.

●

Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.

In the interest of the
environment

●

Materials marked with the symbol are
recyclable.

●

Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.

●

Help to keep your country tidy - use authorised
disposal sites for your old appliance.

How do we help to protect the environment?
We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly
distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the
wash load manually and select a spin programme. For more detailed information see the section headed “Something
Not Working”.

4

Description of the Appliance

6

2

1

5

3

4

SYNTHETICS

DELICATES

COTTONS

WOOL

60°C

50°C

90°C

40°C

O

N

/

O

F

F

F

A

B

R

I

C

S

P

I

N

S

P

E

E

D

W

A

S

H

C

H

O

I

C

E

T

E

M

P

E

R

A

T

U

R

E

1200
900

700
500

O

P

T

I

O

N

S

S

T

A

R

T

/

P

A

U

S

E

R

E

S

E

T

S

K

I

P

Q

U

I

C

K

HAND
WASH

30°C

NIGHT
WASH

P

R

E

W

A

S

H

OUTDOOR
SPORTS

PREWASH

AA40°

FJD 1266 W

D

E

L

A

Y
S

T

A

R

T

C0063

P1131

1 Detergent dispenser drawer

2 Control panel

3 Door locked light

4 Door opening handle

5 Filter

6 Adjustable feet

Door locked light

It stays on during the whole programme indicating that
the door is locked.
When the light goes out, the door can be opened (see
page 12).

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

Child safety feature

This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and restore the possibility of
closing the door, rotate the button anti-clockwise until
the groove is vertical.

5

The Control Panel

SYNTHETICS

DELICATES

COTTONS

WOOL

60°C

50°C

90°C

40°C

O

N

/

O

F

F

F

A

B

R

I

C

S

S

P

I

N

S

P

E

E

D

W

A

S

H

C

H

O

I

C

E

T

E

M

P

E

R

A

T

U

R

E

1200

900

700

500

O

P

T

I

O

N

S

S

T

A

R

T

/

P

A

U

S

E

R

E

S

E

T

S

K

I

P

Q

U

I

C

K

HAND
WASH

30°C

NIGHT
WASH

1234567 89101112

P

R

EW

A

S

H

OUTDOOR
SPORTS

SUPER RINSE

AA40°

FJD 1266 W

DELAY
START

1 ON/OFF button

Press this button to switch the washing machine on.
The display (8) will show three blinking dashes or a
blinking zero. You will find more detailed explanations
on pages 7-8 (see “DISPLAY”).
Press the ON/OFF button again to switch the machine
off.

2 MAINS-ON light

This light is connected to the ON/OFF button. It lights
up when you press the button, and goes out when you
press it again.

3 FABRICS button

Press this button repeatedly to select the programme on
the basis of the type of laundry to be washed. The light
relevant to the selected programme will light up. The
washing machine will propose a temperature and
automatically select the maximum spin value provided
for the programme you have chosen. You can change
these values by operating buttons 4 and 5.

Hand wash

When you select this programme, you obtain a
particularly delicate washing, suitable for articles of
clothing whose label indicates that they must be hand­washed .

4 TEMPERATURE button

Press this button repeatedly to increase or decrease the
temperature, if you want your laundry to be washed at a
temperature different from the one proposed by the
washing machine. The relevant light will light up.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed (HAND WASH programme).

IMPORTANT!

By pressing the TEMPERATURE and SPIN
SPEED buttons simultaneously, the acoustic signal
is deactivated at the end of the cycle, when selecting
the programmes and in case of an incorrect option
selection .
By pressing these 2 buttons again the acoustic signal
is reactivated.

5 SPIN SPEED button

Press this button repeatedly to change the spin speed, if
you want your laundry to be spun at a speed different
from the one proposed by the washing machine. The
relevant light will light up.

Maximum speeds are:

• for cotton: 1,400 or 1,200 rpm depending on the
model;

• for synthetic fabrics, wool and fabrics to be hand­washed: 900 rpm;

• for delicate fabrics: 700 rpm.

NIGHT WASH position : when you choose this
option, the machine will not drain the water of the last
rinse, so as not to wrinkle the laundry.

As all spinning phases are suppressed, this washing
cycle is very quiet and it can be useful at night or in
times with a more economical power rate.

On cotton and synthetic programmes the rinses will be
performed with more water.

At the end of the cycle, the light corresponding to the
option NIGHT WASH is on and the START/PAUSE
button light will flash, to indicate that the water must be
drained. A static zero will appear on the display.
To complete the cycle, choose one of the following
options:

6

• Draining and spin:

---

- Press the START/PAUSE button. The machine will

drain the water, then spin the laundry at the
maximum speed provided for the selected
programme.

- Select spin speed by means of button 5, and press

the START/PAUSE button.

• Drain only

- Press the SKIP/RESET button once, so as to cause

the DRAIN light to light up, then press the
START/PAUSE button.

If the water is not emptied out, the machine
automatically empties itself after 18 hours.

Important! If you accidentally press the SKIP/RESET

button more than once, the display will show three
blinking dashes. To cause the washing machine to

drain the water, select any washing programme by
means of the FABRICS button, then press
SKIP/RESET three times in order to select the
DRAIN position (only the DRAIN light will
remain lit).

6 WASH CHOICE button

Press this button to select the following options:

• PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not

available for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.

• OUTDOOR SPORTS: select this option if you wish
to perform a soak of about 30 minutes at 30°C to your
laundry. By pressing the DELAY START button the
soak time can be prolonged up to 24 hours max. After
this time the wash cycle will automatically start.

This fonction is not available for wool and hand-wash
cycle.
The soak ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.

• QUICK: select this option for laundry that is only

slightly soiled (not for WOOL and HAND WASH

programme).

The washing time will be reduced according to the
type of fabric and the selected temperature.

The PREWASH, the OUTDOOR SPORTS and the
QUICK options cannot be selected together.

7 OPTIONS button

Press this button to select the following options:

• SUPER RINSE: this option can be selected with all
programmes except the wool programme and hand
wash. The machine performs 4 rinses instead of 3.
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.

• AA 40°: this option can be selected for cottons and

synthetics lightly or normally soiled with a
temperature of 40°C or higher.
If you select 40°C together with option AA 40°, the
machine will prolong the time at 40°C in the washing
phase. On cotton programme this will allow an A class
in energy efficiency and washing performance to be
achieved.
If you select 90°C and press the AA 40° button, the
washing temperature will be reduced from 90°C to
60°C.
If you select 60°C or 50°C and press the AA 40°
button, the washing temperature will be reduced to
40°C. In both cases the washing time will be
prolonged.

The SUPER RINSE and the AA 40°options can be
selected together by means of the relevant button.

8 Display

The following pieces of information are shown on the
display:

• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET button.

The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on, if
the previously selected cycle has been erased.

•

Duration of washing programme in hours and

minutes, after you have selected a programme.

While the programme is running (after you have
pressed the START/PAUSE button), the displayed time
value decreases by one unit every minute.

7

• The washing machine has stopped with water in the

E20

tub, at the end of a programme with the NIGHT
WASH option: this is indicated by a static zero.

• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time, the door locked light goes out. The
zero will reappear when you switch the washing
machine on, unless the previous programme has been
erased by means of the SKIP RESET button.

Important!

The first time you use the washing machine, when

you switch it on, it may display a blinking zero and give
an audible warning signal. This is due to the fact that the
washing machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle has
not been erased after its completion.

• Delay start, a time value indicated in hours and
selected by means of the relevant button.

The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the START/PAUSE button, the
countdown begins, and the delay time value decreases
by one unit every hour.
You can delay the start of the selected programme by
up to 24 hours in one hour intervals.

• An incorrect option selection has been made: this is
indicated by the message Err when a function
incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible
warning signal.

• An alarm code indicates a fault in the machine
operation (see the relevant chapter on page 19).

9 START/PAUSE button

This button has three functions:

• Start: after you have selected the desired programme

and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.

If you have selected a delay time by means of button
11, the countdown will begin and will be shown on the
display.

• Pause: when you press this button again, the

programme in progress is interrupted. The light above
the button will start flashing. To restart the programme,
press the button again.

When you PAUSE the cycle, the DOOR LOCKED
light goes out, and it becomes possible to open the
door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important! You must set the washing machine to
PAUSE before you make any change in the programme
in progress.

• Draining of water and spinning after the completion

of programmes with the NIGHT WASH option.

10 SKIP/RESET button

This button performs two functions:

- Clears the memory

- Selects special programmes

At the end of every programme the RESET button must
be pressed once or repeatedly to clear the programme
memory. This will be confirmed by three dashes,
flashing in the display.
If the previous programme is not cleared, the display
will show a “
sound, when you switch the machine on.

Selecting a special programme:

A wash programme must be selected in the normal way.
(START button not pressed)

0” flashing and an audible signal will

8

The SKIP button is then used to cancel or advance the

PREWASH

WASH

SPIN

RINSES

DRAIN

PREWASH

WASH

SPIN

RINSES

DRAIN

PREWASH

WASH

SPIN

RINSES

DRAIN

S

T

A

R

T

/

P

A

U

S

E

PREWASH

WASH

SPIN

RINSES

DRAIN

programme to the required phase.
The SKIP button can only operate when the programme
is in pause.
A normal wash cycle consists of the following phases,
Wash - Rinses - Spin and is confirmed by the
illumination of the corresponding LED,s.

To select rinses & spin, the programme must be
paused, now press the SKIP button once, the wash LED
goes out.

To select spin only, the programme must be paused,
now press the SKIP button twice.
The wash & rinsess LED,s go out.

11 DELAY button

This button makes it possible to delay the starting of the
programme by up to 24 hours. The delay you have
selected is shown on the display for about 3 seconds;
afterwards, the duration of the programme reappears.

If the button OUTDOOR SPORTS has been pressed the
selected delay will correspond to the soak time. If no
delay time is selected the soak programme will last
about 30 minutes.

You must select this option after you have set the
programme and before you press the START/PAUSE
button.
The time value shown on the display will decrease by
one unit every hour.

You can change the delay time at any moment, before
you press the START/PAUSE button.
If you have already pressed the START/PAUSE button,
and you wish to change or cancel the delay time,
proceed as follows:

• set the washing machine to PAUSE by pressing the
START/PAUSE button;

• press the DELAY button until the display shows the
desired delay time or

• press the DELAY button once, to erase the delay time.
The display will indicate “0h”.

• press the START/PAUSE button again.

Important!

The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the door,
press the START/PAUSE button again.

To select Drain the programme must be paused, now
press the SKIP button three times, the wash - rinses -
spin LED,s go out.

12 Programme phase indicator

lights

When you select a programme, the lights relevant to the
phases that form the programme light up.

After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.

9