Safety instructions 22/23
Description of the appliance 24
Use of your appliance25
Operating instructions26/27
Programme chart28/29
Hints & Tips30-32
Cleaning and maintenance33
If something doesn't work34/35
Service35
For the installer
Technical information36
Installation
Unpacking36
Installation37
Levelling37
Moving of the appliance37
Water connection38
Electrical connection38
Guide to use the instruction
The following symbols will be found in the text to guid you
throughout the instructions :
Safety instructions
Hints and tips
Environmental information
21
SAFETY INSTRUCTIONS
You must read the whole of this instruction book
before you use the appliance. Follow the advice
carefully. Keep the book for future reference. If you
sell or give away the appliance, make sure that the
book is passed to the new owner.
The following warnings are provided in the interest
of overall safety. You must read them before the
appliance is installed or used.
Use
This appliance is designed to be used by
adults. Children should not be allowed to touch
the controls or play with the product.
It is dangerous to modify the specifications of
this appliance in any way.
Always unplug the appliance and turn off the
water after use.
Only wash fabrics with are designed to be
machine washed. If in doubt, follow the instructions you find on the label of the item itself.
Place small metal rings or edged plastic rings
in a net or bag.
Make sure that all pockets are empty. Hard,
sharp objects such as coins, safety pins, nails,
screws or stones can cause extensive damage.
Do not machine wash fabrics which are
saturated with petroleum products. If volatile
cleaning fluids have been used, make sure
that they are thoroughly removed from the
fabrics before they are placed in the appliance.
Small and delicate objects (e.g. baby socks,
stockings) can be easily washed inside a small
pillowcase with a zip fastener or in larger
socks.
Use only the recommended quantities of fabric
conditioner.
Before cleaning, care and maintenance, ensure
that the machine is unplugged.
Installation
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be cariied out by a qualified
plumber or competent person.
Make sure that the appliance does not stand
on its electrical supply cable.
This appliance is heavy. Care should be taken
when moving it.
All packaging and transit bolts must be removed
before the appliance is used. Serious damage
may occur if this is not done.
If your washing machine is in a room subject to
temperatures below freezing, the water must
be removed from the machine. So, the danger
of freezing should be expected.
22
Read all instructions before using
the appliance and save them for
future reference.
Safeties
Environmental information
Lid : your washing machine is equipped with
a safety avoiding the switching of the appliance
when the flapdoors of the drum are opened ;
the closure of the lid is so impossible. An
electromechanic safety prohibits the opening
of the lid when the washing machine works and
2 minutes after the end of the programme.
Washing motor : in case of mechanic
overloading, overvoltage, a thermic safety
protects automatically the motor.
Heating : the heating can only begin when
the water quantity necessary for the washing
is in the tub. This safety is useful when there is
a water break-up or if you forget to open the
water inlet hose.
Anti-balanced system : This safety allows to
the appliance to keep a perfect stability during
the intermediary spinnings and during the final
spinning. If you notice that your laundry is not
spinned enough, the anti-balanced system has
then detected a bad distribution of the laundry
during the final spinning ; so it is adviced to
realize a new spinning taking care to unpack
handly the laundry before.
All materials marked by the symbol are
biodegradable. They can be disposed of without
danger or burnt in rubbish incinerators.
In order to realize water and energy savings and to
act in an environmentally conscious manner, we
advice to follow the below instructions :
Use if possible the appliance with full loads
instead of partial loads. Take care to do not
overload the drum.
Use only the programmes with prewash for very
soiled laundry.
Savings on detergent and for the environment
may also be achieved if with medium to hard
water you add sufficient detergent for soft water
and then add separately a softener. This relieves
our waters of a certain amount of chemicals.
When disposing of the machine in a proper
manner, destroy the door lock and cut off the
power supply cord.
23
DESCRIPTION OF THE APPLIANCE
Timer
Spinning speed selector
Pushbuttons
Temperature selector
Control panel
Light
Lid
Handle for opening lid
Lever for castors
Trap door for lint filter
Detergent dispenser
Symbols
) Washing powder for programmes with
(
pre-wash (1).
( )Washing powder or liquid detergent for
the main wash (2).
( )Bleach compartment (3).
(
)Liquid additives (fabric softener and
conditioner...) (4).
5Overflow orifice
24
2
1
4
3
5
USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
23
1
45
1 "EIN/AUS" pushbutton (on/off)
Press the ON/OFF pushbutton, the programme
starts : the control lamp lights on.
2 Control lamp
The control lamp lights on when the appliance is
working (on/off pushbutton pressed). It lights off
when the cycle is finished (programme selector on
a stop position "o").
3 "Spar 1/2" pushbutton (half load
pushbutton)
This pushbutton allows to wash small quantity of
linen not much soiled (2,5 kg) only on the cotton
programmes.
4 Spinning speed variator
It enables to choose the spinning speed until 800
rpm on cotton programmes and until 600 rpm on
synthetics programmes.
The position "
pression (only a draining). Choose the spinning
speed according to the nature of the laundry and
the humidity degree wished at the end of the cycle.
" corresponds to a spinning sup-
6
5 Programme selector
It enables to select the most adapted programme
to the nature and degreees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each programme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "o" for cotton programmes and on a rinse hold position ("o") for
synthetics, delicates and wool programmes.
Never turn the programme selector anticlockwise.
6 Temperature selector
It enables to choose the mosta adapted temperature
between cold ("KALT") and 95°C.
Choose the temperature which corresponds to the
chosen programme, with the help of the indications or the programme table, according to the
fibers and the fastness of the colours.
25
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.