How it Works
York
Loading...
P*DH
Technical Manual
8 pgs278.71 Kb0

York P3HMX14F10001, P*DH, P3HMX20F12001, P4DHX12F08001, P4DHX16F12001 Technical Manual

...
Download
Page 1
036-21475-003 Rev. A (0605)
Heating Air Conditioning
TECHNICAL GUIDE
MODELS: P*HM, P*DH, P*LB OIL-FIRED WARM AIR
UPFLOW / HORIZONTAL, DOWNFLOW / HORIZONTAL AND LOWBOY FURNACES
80 AFUE
R
DESCRIPTION
This is a high end product line for those in the dedicated oil business or HVAC contractor who demands the best in an oil furnace. These oil-fired furnaces are decorator-styled warm air heating units designed for installation in basements, clos­ets, recreation rooms or garages. The complete line consists of three types of furnaces with 9 available models. Heating capacities range from 58 through 188 MBH bonnet output.
All models are designed to accommodate add-on air condi­tioning. The capacities, cfm's and performance are matched to meet year-round comfort requirements. After the installa­tion of an oil-fired furnace, the air conditioner may be added at any time by adding a compact cooling coil to the furnace, and a small quiet condensing section outside the home.
WARRANTY
Lifetime limited warranty on heat exchangers to original owner
10-year limited warranty on heat exchanger when used on commercial applications
1-year limited warranty on all other parts
FEATURES
• Proven circular heat exchanger - 16 gauge all welded construction on P*HMX and P*LBX (except P4LBX20F19001)
• Hard cast ceramic combustion chamber for proper flame control and long reliability
• Industry standard Beckett “AF” series flame retention head burner
• Industry standard controls and components used throughout the furnace for easy service and parts avail­ability
• All models are equipped with fan relay for easy add-on air conditioning (except P4LBX20F19001-heating only)
• All units are approved for multiple firing rates for easy application
• Heavy 20 gauge cabinet for strength and quiet operation
• Quiet four speed direct drive blower motors on most models
EFFICIENCY RATING CERTIFIED
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
Page 2
036-21475-003 Rev. A (0605)
TA BLE 1:
PHYSICAL_ELECTRICAL
HEAT I NG M BH
MODEL
OUTPUT SIZE HP TONS
OIL
RATE
GPH
AFUE %
CFM @ .5
IWG E.S.P.
UNIT
AMPS
MAX. OVER-
CURRENT PROTECT.
WIRE
SIZE AWG
BLOWER
FILTERS
QTY &
SIZE
ADD-ON COOLING
NOM.
CFM
UPFLOW/HORIZONTAL
P2HMX12F08001 79,000 0.70 80.5 1,144 12 15 14 GT10 1/2 (1) 16X25 1 1/2 - 3 1200 P3HMX14F10001 100,000 0.85 83.0 1,360 12 15 14 G10 1/2 (1) 16X25 2 - 3 1/2 1400 P3HMX20F12001 118,000 1.00 82.0 1,797 12 15 14 G12-10 3/4 (1) 16X25 3 - 5 2000
DOWNFLOW/HORIZONTAL
P4DHX12F08001 75,000 0.65 82.4 1,213 12 15 14 GT10 1/2 (1) 20X20 1 1/2 - 3 1200 P4DHX16F12001 112,000 1.00 80.1 1,593 12 15 14 GT12 3/4 (1) 20X20 2 1/2 - 4 1600
LOWBOY
P3LBX12F08001 80,000 0.70 81.5 1,117 12 15 14 GT10 1/2 (1) 20X20 1 1/2 - 3 1200 P3LBX14F12001 113,000 1.00 82.0 1,316 12 15 14 G10 1/2 (1) 20X25 2 - 3 1/2 1400 P2LBX16F14501 143,000 1.20 83.5 1,585 12 15 14 G10 1/2 (1) 20X25 2 1/2 - 4 1600 P4LBX20F19001 188,000 1.65 78.0 1,532 16 20 12 G12-10 3/4 (1) 20X25 N/A N/A
TA BLE 2:
FURNACE MODEL OUTPUT BTU/Hr. NOZZLE (Delavan) FURNACE MODEL OUTPUT BTU/Hr. NOZZLE (Delavan)
P4DHX12F08001
P4DHX16F12001
P2LBX16F14501
P4LBX20F19001
ALTERNATE FIRING RATES
BECKETT AF SERIES OIL BURNERS BECKETT AF SERIES OIL BURNERS
112,000
143,000
188,000
1.
Requires a low firing rate baffle.
2. Factory supplied nozzle.
1
55,000
2
75,000
85,600 0.75 / 80°A 85,200 0.75 / 80°A
96,000 0.85 / 80°A 100,000 0.85 / 70°W
2
123,000 1.10 / 70°A 130,000 1.10 / 70°A
2
168,000 1.50 / 70°B
2
0.50 / 80°A
0.65 / 80°A
P2HMX12F08001
58,000 73,000
79,000
P3HMX14F10001
87,000
P3HMX20F12001
1.00 / 60°A 118,000 1.00 / 70°W 57,000
P3LBX12F08001
1.20 / 60°A
75,000
80,000
85,000
1.65 / 70°B 96,000 0.85 / 70°W
P3LBX14F12001
113,000
1,2
1,2
1 1
0.50 / 70°W
0.65 / 70°W
0.70 / 70°W
1
1 1
0.75 / 70°W
0.50 / 70°W
0.65 / 70°W
0.70 / 70°W
1
2
0.75 / 70°W
1.00 / 70°W
TA BLE 3:
CLEARANCE
MINIMUM CLEARANCES TO COMBUSTIBLES
UPFLOW / HORIZONTAL DOWNFLOW / HORIZONTAL
FROM
80 MBH 120 MBH
TOP1 1 06033
FRONT 24 24 6*** 24 16*** 24 24
SIDES1 11111 REAR 1 1 1 1 1 1 24
BOTTOM 0 0 0**** 1 0**** 1 0**
S. A. PLENUM 1 1 1 1 1 3 1
FLUE PIPE 18* 18* 18* 18* 18* 18* 18*
NOTE: Adequate clearance should be provided over and above these clearances, as required for service access. * May be 9 inches in Canada ** Elevated on 2-1/2 inch bricks *** Front clearance required for servicing **** With floor base accessor
2 Unitary Products Group
80 MBH 120 MBH
DOWNFLOW HORZONTAL DOWNFLOW HORZONTAL
LOWBOY
ALL MODELS
Side 1 = 6
Side 2 = 18
Page 3
DIMENSIONS
TA BLE 4:
P4DHX12F08001 22
1
Add 8-1/2 inches to allow for burner, (30-3/4 inches total).
Add 8-3/4 inches to allow for add-on vestibule cabinet, (31 inches total). All dimensions in inches.
P4DHX12F08001
MODELS
CABINET PLENUM OPENINGS FLUE
Width Depth Height Supply Air
(A) (B) (C) (D x E) (K x L) (F x G) (H) Type Size
1
22-1/8
55-1/4 19 x 19 14 x 22 18 x 18 5 Permanent 16 x 25 x 1 265 lb.
Return Air
Side Bottom
Dia.
036-21475-003 Rev. A (0605)
FILTER
SHIPPING
WEIGHT
TA BLE 5:
Width Depth Height Supply Air Return Air Gap Dia. Height
All dimensions in inches.
P2LBX16F14501
CABINET PLENUM OPENINGS FLUE
FILTER
(A) (B) (C) (D x E) (D x G) (F) (H) (J)
22 51-1/2 41 20-1/2 x 18-5/8 20-1/2 x 18-5/8 1-3/4 6 34-3/8 20 x 25 x 1 290 lb.
SHIPPING
WEIGHT
Unitary Products Group 3
Page 4
036-21475-003 Rev. A (0605)
TA BLE 6:
P4LBX20F19001
CABINET PLENUM OPENINGS FLUE
Width Depth Height Supply Air Return Air
(A) (B) (C) (D x E) (D x G) (J)
26
1
Add 8-½ inches to allow for oil burner, (54-½ inches total). All dimensions in inches.
TA BLE 7:
46
1
56 24 x 22 24 x 22 2- 5/8 7 50-1/4 20 x 25 x 1 390 lb.
P4DHX16F12001
Gap
Dia.
(H)
CABINET PLENUM OPENINGS FLUE
MODELS
Width Depth Height Supply Air
Return Air
Side Bottom
Dia.
(A) (B) (C) (D x E) (K x L) (F x G) (H) Type Size
P4DHX16F12001 22-1/4
1
Add 8-1/2 inches to allow for burner, (30-3/4 inches total).
22-1/4
1
62 20-1/2 x 20-1/2 18 x 18 18 x 18 6 Permanent 20 x 20 x 1 292 lb.
Add 8-3/4 inches to allow for add-on vestibule cabinet, (31 inches total). All dimensions in inches.
Height
FILTER
(2)
FILTER
SHIPPING
WEIGHT
SHIPPING
WEIGHT
4 Unitary Products Group
Page 5
036-21475-003 Rev. A (0605)
TA BLE 8:
Width Depth Height Supply Air
P*HMX MODELS
CABINET PLENUM OPENINGS FLUE
Return Air
Side
A B C D x E F x G H
22 31 49-1/2 20-1/2 x 20 14 x 22 14 x 22 5 42 16 x 25 x 1 190
P*HMX14F10001 AND P*HMX20F12001
22 31 58-1/8 20-1/2 x 20 14 x 22 14 x 22 6 46-1/2 16 x 25 x 1 270
Bottom
P*HMX12F08001
Diameter
Height
FILTER
(PERM.)
SHIP
WEIGHT
(LB.)
Unitary Products Group 5
Page 6
036-21475-003 Rev. A (0605)
TA BLE 9:
Width Length Height Supply Air Return Air
P*LBX MODELS
CABINET PLENUM OPENINGS FLUE
A B C D x E F x G H
P*LBX12F08001
22 51-1/2 32 20-1/2 x 18 20-1/2 x 18 5 26 20 x 20 x 1 240
P*LBX14F12001
22 51-1/2 41 20-1/2 x 18-1/2 20-1/2 x 18-1/2 6 34½ 20 x 25 x 1 267
Diameter
Height
FILTER
(PERM.)
SHIP
WEIGHT
(LB.)
6 Unitary Products Group
Page 7
036-21475-003 Rev. A (0605)
TABLE 10:
P2HMX12F08001
P3HMX14F10001
P3HMX20F12001
P4DHX12F08001
P42DHX16F12001
P3LBX12F08001
P3LBX14F12001
P2LBX16F14501
BLOWER PERFORMANCE
MODEL
SPEED
Med-Hi 1318 1256 1178 1108 1007
Med-Low 1173 1132 1071 993 909
Med-Hi 1507 1425 1338 1270 1171
Med-Low 1172 1146 1119 1064 977
Med-Hi 1764 1730 1695 1640 1584
Med-Low 1677 1658 1603 1565 1506
Med-Hi 1423 1381 1291 1220 1144
Med-Low 1170 1144 1118 1063 1005
Med-Hi 1747 1689 1630 1569 1495
Med-Low 1648 1604 1542 1486 1438
Med-Hi 1359 1268 1170 1090 975
Med-Low 1063 1034 1005 944 844
Med-Hi 1487 1404 1339 1245 1036
Med-Low 1222 1197 1174 1092 913
Med-Hi 1570 1540 1495 1445 1375
Med-Low 1090 1080 1070 1065 1050
EXTERNAL STATIC PRESSURE, INCHES W.C.
TAP
High 1368 1298 1223 1144 1046
Low 856 833 791 748 692 High 1604 1527 1446 1360 1245
Low 810 771 731 690 645 High 1957 1911 1846 1797 1729
Low 1446 1446 1446 1404 1315 High 1505 1444 1359 1291 1196
Low 813 813 797 763 690 High 1833 1786 1722 1656 1568
Low 1535 1494 1456 1406 1346 High 1444 1337 1220 1117 1020
Low 730 689 688 644 596 High 1566 1487 1404 1316 1145
Low 845 845 809 771 690 High 1810 t1740 1675 1585 1510
Low 710 700 690 665 650
0.20 0.30 0.40 0.50 0.60
MODEL
P4LBX20F19001
MOTOR PULLEY
ACCESSORIES
COMBUSTIBLE FLOOR BASE
1CB1312 = For P3DHX12 model
Unitary Products Group 7
EXTERNAL STATIC PRESSURE, INCHES W.C.
TURNS OUT
0 2274 2080 1847 1532 1099 2 2107 1927 1712 1420 1019 4 1939 1775 1576 1308 939 6 1772 1622 1441 1196 859
0.20 0.30 0.40 0.50 0.60
1CB0416 = For P2DHX16 model
COMBUSTIBLE FLOOR BASE
1VP1280 VESTIBULE PANEL FOR P3DHX12F08001
Page 8
Subject to change without notice. Printed in U.S.A. 036-21475-003 Rev. A (0605) Copyright © by York International Corp. 2005. All rights reserved. Superseded: 036-21475-002 Rev. B (0903)
Unitary 5005 Norman Products York OK Group Drive 73069
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use