YOO DIGITAL COOKYOO 1800 User Manual
IMPORTANT : safety advice
.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can
kill or hurt you and others. All safety messages will follow the safety alert symbol
and either the word “DANGER” or “WARNING.” These words mean:
ENGLISH
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Read this user manual carefully before you use the appliance and save it for future reference.
IMPORTANT : safety advice
When using this electrical appliance, basic safety precautions should always be followed, including
the following:
Read all instructions.1.
Before using check that the voltage indicated on the product corresponds with the voltage of your 2.
electrical outlet.
Do not let cord hang on hot surface or over edge of table or counter.3.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunction or has been 4.
damaged in any manner. Return the appliance to the nearest authorized service facility for examination,
repair or adjustment.
If the supply cord is damaged，it must be replaced by the manufacturer or its service agent or a similarly 5.
qualified person in order to avoid a hazard.
Close supervision is necessary when any appliance is used by or near children.6.
Avoid contacting moving parts.7.
Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or 8.
damage to the blender. A scraper may be used but must be used only when the blender is not running.
The use of attachments, including jar, jar cover, blade assembly, not recommended or sold by manufacturer 9.
may cause fire, electric shock or injury.
The appliance can not be used for blending hard and dry substance, otherwise the blade could be 10.
blunted.
Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.11.
To reduce the risk of injury, never place blade assembly on motor unit without the jar properly 12.
attached.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or 13.
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a person responsible for their safety.
Do not leave the machine on unattended.14.
When removing the blender from the motor unit, wait until the blades have completely stopped.15.
Always operate blender with cover in place.16.
Always use the appliance on a secure, dry level surface.17.
Never place this appliance on or near a hot gas or an electric burner or where it could touch a heated 18.
appliance.
Do not use outdoors.19.
Warning: never use hot liquids or run the appliance empty.20.
Do not u appliance for other than its intended use.21.
Assembly/Disassembly
K N O W Y O U R B L E N D E R ____________________________________________
ENGLISH
C O N T R O L P A N E L _________________________________________________
How to use
B L E N D E R J A R A S S E M B L Y ___________________________________________
Before first use, unpack the appliance and place all parts on a horizontal surface.1.
The cap, lid, jar assembly, blade assembly, and jar base have already been assembled into the motor unit. 2.
Disassemble to wash all parts except the motor unit. Refer to the latter chapter CARE AND CLEANING.
Once all pieces have been cleaned and dry thoroughly, reassemble.3.
Place the blade assembly into the jar assembly (See Fig.1).4.
Put the jar base onto the blade assembly, holding the jar handle, thread the jar base into the bottom of 5.
the jar assembly and turn it counterclockwise until tight. (as shown in Fig.2)
Put the lid onto the jar assembly. (See Fig.3)6.
Place the cap into the lid and lock in the direction as shown in Fig.47.
Finally, place the assembled jar onto the motor unit and turn it clockwise until tight. (See Fig.5)8.
WARNING
Jar is now secure. Do not try to twist jar onto motor unit
O P E R A T I O N _____________________________________________________
This unit comes with a Liquid Crystal Display (LCD) screen that shows the total operation time of 2
minutes (120s) for each speed setting selected. To use:
Place the food to be blended into the jar and put the lid on the jar before blending. (See Fig.6)
Be sure the cap is in place.
When crushing ice or hard food, keep one hand on the lid.
Note : The mixture in the jar never exceed the max capacity of jar (1200ml)
Plug in the unit, press the key POWER, a beep sound is heard, the LCD comes on and displays “00”. (See 1.
“CONTROL PANEL”) The indicator of POWER key blinks and other indicators of three keys are illuminated.
And the default function is MIX, namely the indicator of MIX is lighting.
Press the key FUNCTION consecutively to select the speed setting you want. MIX(1), CHOP(2), BLENDER(3), 2.
LIQUIFY(4), PUREE(5)or ICE CRUSH. The light of selected setting is illuminated on the control panel and
the LCD displays the total operation time of 2 minutes for each setting.
Press the key START/CANCEL to start the unit and the START/CANCEL key begins blinking. 3.
The POWER key stops blinking and becomes illuminated, the LCD will count down.
Note : During operation, you can press and hold PULSE button at any time to achieve the highest speed.
Once the time has run, namely the operation has completed, beeps will be 4.
heard, the appliance will stop automatically, namely the POWER key turns to
blink, and the START/CANCEL key stops blinking and becomes illuminated.
Note : during operation, if desired effect has obtained, you can press the START/CANCEL key to stop
operating. The POWER key will blink and the START/CANCEL key stops blinking and becomes illuminated.
After use, Press the POWER key to disconnect the unit from the mains supply. 5.
Note : Minimum 1 minutes rest period is required between two consecutive cycles.
ENGLISH
I M P O R T A N T O P E R A T I N G T I P S ______________________________________
For quick or delicate blending tasks, use the PULSE key for •
a few seconds, then release. For best result when crushing
ice, use the ICE CRUSH setting.
If you want to add ingredients while the blender is on, remove •
the cap and place through the lid opening. (See Fig.7)
To remove the jar assembly, unlock it from the motor unit •
in the direction as shown in Fig.5. Remove the lid before
pouring.
B L E N D I N G T I P S __________________________________________________
To prepare fruit smoothies using fresh or frozen fruit, peel, core and then cut fruits into pieces.•
For best circulation of food that are to be blended with some liquids, pour the liquid into the jar first, then •
add solids.
Some of the tasks that cannot be performed efficiently with a blender are: beating egg white, whipping •
cream, mashing potatoes, mixing dough, extracting juice from fruit and vegetable
The following items should never be placed in the unit as they may cause damage: bones, large pieces of •
solid, or tough foods such as turnips.
To crush ice, add proper size cubes. Hold one hand firmly on the lid; use the ICE CRUSH setting. If more ice •
is needed, remove the cap and add cubes one by one through the lid opening.
WARNING
Keep hands and utensils out of the container while blending / away
from the cutting blade while chopping food to prevent the possibility of
severe injury to persons or damage to the unit.
Loading...