YI Smart Dash Camera User's Guide

小蚁智能行车记录仪使用指南(英文版)

2016-03-10

正面：

背面：

YI Smart D ash Camera User's Guide

1. Basic Configuration

YI Smart Da sh Camera (1)

Adhesive 3M Mount Bracket (1)

USB Car Charger (1)

[Input: 10-30V, Output: 5V 1.0A]

11.5 ft. Standard Micro USB Power Cord

YI Smart Dash Camera
User's Guide

2. Camera Components 3. Charging the Camera

CR0

MI

D

S

micro SD

Card

Lens

Microphone

Ple ase us e a genu ine 8- 64 GB mi croSD c ard (C lass 1 0 and ab ove) , other wise t he
cam era ma y be una ble to r ecor d or rec ordin g may be i nter rupt ed.

Mount slot

Speaker

Air vent

microSD card slot

Emergency Recording

Record

Album

Status Indicator Light

LCD Screen

Micro USB Power Port

Reset Pinhole

Settings / Power

Battery Charging Indicator

1. Insert the USB car charger into your car's cigarette lighter socket.

2. Insert the USB end of the USB power cord into the USB car charger.

3. Insert the Micro USB into the dash cam USB port.
[Charger Specifications: In: 10-30V, Out: 5V 1A]

4.YI Smart Dash Camera and Mobile Phone Connections

YI Smart D ash Camera can wo rk independe ntly withou t a pp when you are driv ing. App
provi des addition al features an d i mproved user e xperience s.

1） Installing the YI Dash Camera App

Scan the QR code below or download YI Dash Cam App from Apple App Store or Google Play.

(App requires Android 4.1 / iOS 7.0 or above)

2）Updating Firmware

To improve user experience, please use the the most current firmware with improvements.
When the app is connected to the Internet, it will automatically check for the latest firmware
updates. Please follow the prompts to update.

Scan the QR code

2

3

1

App Q R code

3）Overview of YI Smart Dash Camera App Functions 4） Getting Started with ADAS

More informa tion about ADAS (Advanced Drive r Assistance System) funct ions and how
to use it can be found in app.

These features are intended to be used as reference only. There are many variab les t hat

YI Button Capture

Album
Discover
YI Button

Album - View or download video from camera, share videos/photos to social media.
Discover - Find the latest interesting and exciting videos here.
YI Button - Capture exciting short videos with one touch.
Settings - Modify your camera's settings or update your camera's firmware from app.
Store - The YI Store, find YI products here.

Settings

YI ButtonDiscover

Album

Store

Setti ngs
Store

can cause ADAS features to not function properly .

Driver Assistance Warning

This device is equipped with certain ADAS features such as

Setti ngs

Forward Collision Warning System (FCWS) and Lane Departure
Warning System (LDWS). Please note that this device will
NOT automatically apply brakes, control the steering, or control
other functions of your vehicle to avoid traffic accidents,Therefore,
it is the sole responsibility of the driver. These Device will automatically
power on and charging will begin when you start your car. There are
many variables that can cause these ADAS features to not function
correctly and therefore it is the sole responsibility of the driver to
operate their vehicle according to all the local safety and traffic laws.
Always use your best judgment, and operate the vehicle in a safe
manner. Do not become distracted by the device while driving, and
be fully aware of all driving conditions. Minimize the amount of time
spent viewing the device screen while driving.

5. Basic U ser Instr uctions

Record

Setting/Power

Charging Indicator

1） Power On/Off

Power on : Long press Setting/Power.
Power off : Long press Setting/Power.
Auto Power On: Device will automatically power on after you start your car and battery
charging starts.
Auto Power Off: When you turn your car off the device will end recording after 10 seconds and
power off.

2） Set ting s

After powering on, press the Setting/Power button to enter the Settings menu:
Video Resolution: Defa ult i s 19 20x1080p 30fps. Press " Confirm" to select among
1920x1080 30fps, 1920x1080 60fps and 2304x1296 30 fps.

Microphone: Press "Confirm" to enable or disable microphone.
Collision detection: Default is medium sensitivity. Press "Confirm" to select low, medium, or

high sensitivity.When the car experiences dramatic impact such as collision 20 seconds video
(from10 seconds before the impact to 10 seconds after the impact) will be kept as emergency
recording as key evidence.
AD A S*：Press "Confirm" to enable or disable ADAS.

Wi-Fi: Press "Confirm" to turn on /off Wi-Fi .

Form at: Press "Co nfirm" to fo rmat the memo ry card.

(cau tion: this wi ll erase all da ta).
Factory Reset: This will restore the device to its original system settings.

Video Resolution: 1080P/30FPS

Video Resolution

Microphone

ADA S Safet y

Rem inder

Format

Abou t

1080

ADAS

micro

30

SD

ConfirmPrevious NextBack

Collision Sensitivity

Wi-F i
Auto -of f L CD

Factor y Reset

Date/Time

3） Emergency Recording

Press "Confir m" t o en able or d isable the emergency recording feat ure.
Enable emerge ncy recording by press ing the indicator butt on a s sh own below.

201 5/12/ 12 19:1 5:26

Progress Bar

Emergency Recording

Warning: Veri fiy you have inserted a microSD ca rd t o sa ve r ecordings.

4） Loop Recording

Loop recording and charging will automatically begin after you start your car.

A red dot will fl ash on the top of the screen an d t he "Status Indic ator Light"
wil l stay on. Y ou can cha nge the vi deo reco rding st atus (st art and st op)
by pressing "Loop Recording" .

（Warning: When the micro SD card is full, the camera will replace the old file with your new
recording. )

201 5/12/ 12 19:1 5:26

Loop R ecordin g

Warning: In some jurisdictions it could be considered an invasion of privacy rights to take or publicly
display photographs or videos of people or their vehicles using this product. It is your responsibility
to know and comply with applicable laws and rights to privacy in your jurisdiction.

5） Album

Press Album to review recordings. Use the arrows to review the previous or next " "
video/photo. Select Confirm to start photo/video playback. During playback, use " "
Confirm to pause the album." "

Photo Album

M P4

JPG

6） Indicator Lights

Charging Indicator Light:

1.Charging in process (red): Constant light.

2. Charging completed : turns off.
Status Indicator Light:

1. Recoding in process (orange): Continuous one flash per second.

2. Updating in process (orange): Fast flashing.

7/1 2

Album

M P4

M P4M P4

Charging Indicator Light

Status Indicator Light

JPG

6. Wiring Installation Diagram

1 2 3

The mount bracket need to

tie to in position

Line the power cable

around the trim of your vehicle

Insert the car charger into your

vehicles cigarette lighter port

and connect the USB cable

Windshield Mounting Legal Restrictions

Before using the suction cup mount on your windshield, check the state and local laws and ordinances where you drive.

Some state laws prohibit drivers from using mounts on their windshields while operating motor vehicles. Other state laws

allow the suction mount to be located only in specific locations on the windshield. Many other states have enacted

restrictions against placing objects on the windshield in locations that obstruct the driver’s vision. IT IS THE USER’S

RESPONSIBILITY TO MOUNT THE DEVICE IN COMPLIANCE WITH ALL APPLICABLE LAWS AND ORDIANCES.

Always mount your device in a location that does not obstruct the driver’s view of the road. Xiaoyi does not assume any

responsibility for any fines, penalties, or damages that may be incurred as a result of any state or local law or ordinance

relating to the use of your device.

7.YI Sma rt Dash Cam era Basic Parameters

Maximum resolution: 2304×1296
Video resolution: 1296p 30fps/1080p 60fps/1080p 30fps
FOV(D) 165°, F1.8 ultra-wide-angle glass optical lens
Sound: built-in microphone / speaker
Video compression: H.264 encoding, MP4 format
New generation WDR 2.0
Storage: 8 - 64GB Class10 or above with FAT32 format
Weight: 2.6 ounces

2.7" Graphic 960×240 dot-matrix delta type TFT LCD
Wi-Fi supports single band 2.4GHz and 802.11n standard
Smartphone platform support: Android 4.1 / iOS 7.0 or above
WPA2 wireless encryption
Power cord: 11.5 ft length

Power source: USB Car Charger, Input: 10V-30V; Output: 5V/1A max.

8. Safe Dr iving Declaration

This p roduct fea tures an AD AS (Advance d Driver As sistance S ystem), in cluding Fo rward
Collision War ning and Lane Departure War ning. After it is turned on, the ADAS will display
some of th e driving data, to h elp the driver unde rstand current driv ing conditions.H owever,
you should continue to observe the road conditions, obey traffic regulations and drive carefully.
The use of this product will not prevent accidents.
The products, apps, functions and scr eens etc mention ed in this guid e may have bee n
improv ed after the p roduct has go ne on sale. I f you encount er inconsist encies durin g the
actual use of t he prod uct an d relat ed apps , plea se refe r to the instruction s on the YI
offici al website. T his guide sho uld not be ta ken independ ently from ot her instruct ions.

Thank you for choosing the YI Smart Dash Camera, please read the instructions carefully before
using the product and keep it in good condition.

Manufac turer: YI Techn ology
Service Telephone: [phone]
Address : Floor 6, Build ing E, Changtai Plaza, 2889 Ji nke Road, Pudon g New District, Shanghai
To make a query or obtain support information, please visit the YI after-sales service website: www.
WeAreYI.com;

YI support number: [phone]

Website: www.yitechnolo gy.com
E-mail:s upport@yitechn ology.com

This product is designed, manufactured, and assembled in China. The sale and intended
operat ing environment of thi s p roduct is limited to the Unit ed States . A s s uch, part or all
of the services an d f unctionalitie s are n ot guarant eed to be availabl e w hen this product
is used outside the United States.

IMPO RTANT SA FETY GUIL DELINE S

1. REA D these ins tructi on.

2. CLE AN ONLY wit h dry cloth .

3. ONL Y USE attac hments /access ories sp ecified b y the manuf acturer.

4. UNP LUG this ap paratu s duri ng ligh tning s torms or when un used for long per iods
o f time .

5. To get t he best u sage ou t of this p roduc t, ple ase con siste ntly up date to the l atest
vers ions of our a pp and firm ware.

NOTI CE:
The values displayed in this device, such as speed, position, and the distance warning to the

speed camera set points, may be inaccurate due to the influence of surrounding environment.
They are for your reference only.
The system is used only for non-commercial use, within the maximum limits permitted by
applicable law. Xiaoyi does not accept any responsibility for any data loss during the operation.

Not e:

“Xiaoyi”and “YI”logo are trademarks of Shanghai Xiaoyi Technology Co.,Ltd.

This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause harmful
in terf ere nce , a nd (2 ) t his de vic e m ust ac cep t a ny in ter fer ence r ecei ved ,in clu ding

interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

Changes or m odifications not expr essly approved by the party responsible fo r compliance

could void the use r's authori ty to operat e the equipm ent.

This equipment h as been tested and found t o comply with the limits fo r a Cla ss B dig ital device ,
pursuant to part 15 of the FCC Rule s. These limit s are designed to provide re asonable prote ction
against harmful int erference in a resident ial installat ion. This e quipment gene rates uses and can
radiate radio frequ ency energy and, if not installe d and used in accord ance with the instructi ons,
may cause harmful interference to radio co mmunications. However, there is no guara ntee tha t
interfere nce will not occur in a particular installatio n. If this eq uipment does cause harmf ul
interfere nce to radio or televis ion recep tion, whic h can be dete rmined by turning the e quipment
off and on, the user is encour aged to try to corre ct the interferen ce by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Under Indus try Canada regulat ions, this radio tra nsmitter may only o perate using an ante nna of a
type a nd maximum (or lesser) gain app roved for the transmitt er by Industry Ca nada. To r educe
potential r adio interference to other users, the a ntenna type and its g ain should be so chos en that
the equiva lent isotropicall y radiated power ( e.i.r.p.) is not m ore than that nec essary for success ful
communication .

C10 US V2.0

Con fo rmém ent à la réglem enta tion d' Indu stri e Can ada, le p résen t émet teu r rad io p eut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inféri eur) approuvépour l'émetteur
par Industrie Canada. Dans le but de réduire les
autres utili sateurs, il faut choisir le type d'antenn e et son gain de s orte que la puissance is otrope
rayonnée équiv alente (p.i.r .e.) ne dépass e pas
co mmun icat ion sati sfa isan te.

MPE Requirements

To satisf y FCC / IC RF expo sure requiremen ts, a separatio n distance of 20 c m or more should be
maintained between the antenna of this device and persons during device operation.To ensure compliance,
operations at closer than this distance is not recommended.

Les antennes installées doivent être situées de facon à ce que la populat ion ne puissey être exposée à
une distance de moin de 20 cm. Installer les antennes de facon à ceque le personnel ne puisse approcher

à 20 cm ou moins de la position centrale de l’antenne. La FCC des éltats-unis stipule que cet appareil

doit être en tout temps éloigné d au moins 20 cm des personnes pendant son functionnement.

risques de brouillage

l'inte nsité nécessai re à l'établi ssement d'u ne

radioélectriqueà l 'intention des

1313

FCC ID:2AFIB-YCS1015

折叠图：

C10

小蚁智能行车记录仪

105g太空梭无光铜

C10M6099AAAP

王伟

说明书(英文版)

100X80mm

风琴折

6099C10M00AR1A