Y-E Data YD-8V14 User Manual

Universal Serial Bus Interface Hexa Media Drive

USB HMD

Model YD-8V14

Users Manual

September 2002

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 2

Important instructions for use of the Hexa Media Drive (HMD)

Caution

 Before connecting the USB HMD to your PC, read through this

manual. The driver software may have to be installed in advance.

 When connecting/disconnecting the USB cable of the USB HMD or

turning on/off your PC, remove all memory cards.

 This product is precision equipment. So do not drop the product,

give a strong impact to it, or install it in locations exposed to heavy vibrations; doing so may cause the product breakdown.

Prohibition

 Do not disassemble or modify the product. Disassembly or

modification may cause a break do wn, fi re, or el ectri c shock.

 Do not use or store the product in wet l ocat ions. The entry of liquid

into the product may result in a break down, fire, or electric shock.

 Do not insert any memory cards other than specified ones. The

insertion of a metal piece such as a coin or clip may lead to a breakdown, fire, or electric shock.

 Do not remove the memory card from the product when its access

LED lamp is lit.

 This product is designed to be used for general electric equipment.

Do not use it for equipment requiring exceptional quality or reliability, particu larly when the breakdown or malfunction of this product may jeopardize life or health (such as aerospace equipment, atomic power control systems, traffic-related equipment, transportation equipment, industrial robot, combustion equipment, various safety devices, and life-support system).

z It is prohibited by the copyright law to reproduce the whole or part of this

software and User’s Manual and rent the software, without permission of the copyright holder.

z We bear no liability for any pecuniary losses and lost profit s res ulting from use of

the software include d with this product, and any cl ai ms from thi rd parties.

z This softwar e cannot be used on other than specified equipment. z The specifications of this software are subject to change without notice. z We assume no responsibility for any breakdown and damage caused by misuse,

troubles from other equipment, undue repairs or m odi f ications.

z If this product should have any defect attributable to manufacture, we will

exchange it with a new one, but cannot take on any more responsibility.

Illustrative pictures in this manual may differ from the PC’s actual screens.

Apple, Mac and Macintosh are trade mark of Apple Computer. CompactFlash is a trademark of SanDisk Corporation. IBM is a trademark of IBM Corporation. Microsoft Windows is a trademark of Microsoft Corporation. MultiMediaCard is a trademark of Infineon Technologies AG and licensed MultiMediaCard Association. SD Logo is a trademark. SONY and Memory Stick are trademark of SONY Corporation. SmartMedia is a trademark of Toshiba Corporation. Y-E Data is a trademark of YE DATA INC. All other trademarks are the property of their respective owners and are hereby acknowledged.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 3

T able of Contents

1.

1.1.

1. OVERVIEW

OVERVIEWOVERVIEW

OVERVIEW................................

................................................................

...............................................

..............................

............... 4444

1.1. F

EATURES OF THE USB HMD................................................................................. 4

1.2. E

XTERIOR FEATURES OF THE USB HMD ............................................................... 5

1.3. P

ACKAGE CONTENT ................................................................................................. 5

1.4. T

YPES OF AVAILABLE MEMORY CARDS ................................................................... 6

1.5. M

EMORY CARD SLOTS ............................................................................................. 7

1.6. S

UPPORTED OSS ...................................................................................................... 8

2.

2.2.

2. MACINTOSH

MACINTOSHMACINTOSH

MACINTOSH................................

................................................................

............................................

........................

............ 9999

2.1. H

OW TO INSTALL (FOR MAC OS X VER.10.1.2 OR GREATER).................................. 9

2.2. H

OW TO INSTALL (FOR MAC OS 8.6, 9.0, 9.1 AND 9.2) ......................................... 10

2.3. H

OW TO UNINSTALL THE DRIVER SOFTWARE ......................................................... 12

2.4. H

OW TO OPERATE ON MACINTOSH ........................................................................ 13

2.5. R

ESTRICTIONS FOR MACINTOSH............................................................................ 15

3.

3.3.

3. WINDOWS

WINDOWSWINDOWS

WINDOWS................................

................................................................

..............................................

............................

.............. 17

1717

17

3.1. H

OW TO INSTALL (FOR WINDOWS XP) .................................................................. 17

3.2. H

OW TO INSTALL (FOR WINDOWS 2000)................................................................ 21

3.3. H

OW TO INSTALL (FOR WINDOWS ME).................................................................. 24

3.4. H

OW TO INSTALL (FOR WINDOWS 98 AND WINDOWS 98 SE)................................ 27

3.5. H

OW TO CHANGE THE DRIVE LETTER (REFERENCE INFORMATION)...................... 30

3.6. H

OW TO OPERATE ON WINDOWS............................................................................ 33

3.7. R

ESTRICTIONS FOR WINDOWS............................................................................... 36

4.

4.4.

4. SPECIFICATIONS

SPECIFICATIONSSPECIFICATIONS

SPECIFICATIONS................................

................................................................

..................................

....

.. 38

3838

38

4.1. O

PERATING TEMPERA TURE RANGE....................................................................... 38

4.2. O

PERATING HUMIDITY RANGE.............................................................................. 38

4.3. P

OSITION DURING OPERATION .............................................................................. 38

4.4. USB S

PECIFICATIONS............................................................................................ 38

4.5. E

LECTRICAL SPECIFICATIONS................................................................................ 38

4.6. S

UPPORTED MEMORY CARDS ................................................................................ 38

5.

5.5.

5. ABOUT INQUIRIES

ABOUT INQUIRIESABOUT INQUIRIES

ABOUT INQUIRIES ................................

................................................................

...............................................................

..............................................................

............................... 38

3838

38

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 4

1. Overview

The USB Hexa Media Drive (HMD) is a multi-format memory card reader/writer for the Universal Serial Bus (USB) interface, which allows you to use six types of memory cards with a single device. To use the HMD, your computer must have a USB port, your OS must support USB, and the soft w are for the USB HMD must be installed.

1.1. Features of the USB HMD

1) With this single device, you can use the following six of memory cards available on the market now.

1. SmartMedia

2. CompactFlash

3. Microdrive

4. Memory Stick

5. SD Memory Card

6. MultiMediaCard

2) The newly-developed Y-E Data dedicated IC all ows high-spee d acc ess to memory cards. Error detection and correction cap abilit y has been integrat ed into the d edicate d IC, whic h makes the HMD highly reliable for data read/write operations without garble d data.

3) The newly-adopted mount indication LEDs allow you to easily determine whether you can remove a media card. The LEDs prevent failures due to removing media during operation by mistake.

4) The newly-developed multi-format memory card connector allows you to insert all the types of media cards mentioned above without any adaptors, and the device is able to maintain a very compact design.

5) The industry standards, USB Mass Storage Class and Multi Logical Unit Number (MultiLUN), are supported. Therefore, when you use the latest OSs, Windows Me and Windows XP, the need for installing separate driver software is eliminated. You can immediately start using t his product by simply connecting the USB cable.

6) For Windows 98, Windows 2000, and Mac intosh O S, using the at t ached dr iv ers, y ou can immediately use this produ ct af t er a simple setup.

7) This product is compact and lightweight and requires no AC adaptor, which makes it ideal for a mobile environment.

8) The USB cable is the industry standard USB mini-B connector, which can be detached from the main body.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 5

1.2. Exterior Features of the USB HMD

NOTE: The mount LEDs in di cate that media is in use and power is supplied.

1.3. Package Content

USB HMD USB Cable Driver CD-RO M

NOTE: Memory cards are not included. Purchase them separately.

Access LED

Smart Media

Memory Stick SD Memory Card MMC

Mount LEDs

Compact Flash

Smart Media

Memory Stick or SD Memory Card or MMC

USB Cable

USB A Connector Connect to PC.

USB mini B Connector

Compact Flash

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 6

1.4. Types of Available Memory Cards

Memory Card Support CompactFlash DOS-formatted memory cards are supported. I/O cards s uch as

modem, LAN, and PHS cards are not supported.

Microdrive We have checked the operation of IBM Type II Microdrives of up

to 1 GB. When using an IBM Microdrive, remove other memory cards. The Microdrive requires more power t han ot her memory cards, if with other memory cards at the same time, an error may occur due to a shortage of power.

SmartMedia DOS-formatted mem ory cards between 2 MB and 128 MB are

supported. Only 3.3 V cards (including indicated as 3 V) are supported. 5 V cards are not. You can use SmartMedia cards with an ID, but the ID feature is not supported. Music data and other protected file types with anti-piracy functions are not supported. ROM cards are not supported.

Memory Stick Sticks between 4 MB and 128 MB are supported. Magic Gate

cards (white) are supported, but the Magic Gate feature is not supported, so music data and other protected file types with anti-piracy functions are not supporte d. I/O cards that are not memory such as GPS cards are not

available. MultiMediaCard (MMC)

Cards between 16 M and 64 M are supported. Keitaide-Music

support cards are supported, but the Keitaide-Music feature

(UDAC-MB protocol) is not supported, so music data and other

protected file types with anti-pira cy functions are not supported.

The read/write speed for MultiMediaCard is much slower than

other cards. This limitation comes from the specifications of the

cards. SD Memory Card Cards between 8 MB and 512 MB are available. The Secure

Digital feature is not supported, so music data and other

protected file types with anti-pira cy functions are not supported.

SD I/O cards and SD Combo cards are not available.

NOTE:

1) In this manual, the above six ty pes of me di a are generically called memory cards.

2) When using a Microdrive, do not use other memory cards at the same time because of

its large power consum ption.

3) Memory Sticks, MultiMediaCards, and SD Memory Cards use the same slot, so you

cannot use them at the same time.

4) Only DOS format is supported. Memory cards formatted not in DOS format are not

available.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 7

1.5.

Memory Card Slots

1) CompactFlash and Micr odrive

Insert a Compact Flash/ Microdrive card in the bottom slot with the label side up.

2) Smart Media

Insert a Smart Media card in the top slot wit h t he gold terminal side up.

3) Memory Stick

Insert a Memory St ick in the upper part of the middl e slot w ith t he label side up.

4) SD Memory Card and Multi Media Card

Insert an SD Memory Card/Multi Media Card in the lower part of the middle slot with the label side up.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 8

1.6. Supported OSs

PC OS Driver Software Page

Mac OS X (Ver. 10.1.2 or greater) This product works with the

standard driver in OS X.

9Macintosh

Mac OS 8.6 Mac OS 9.0 Mac OS 9.0.4 Mac OS 9.1 Mac OS 9.2

Install the driver software from the CD-ROM.

10

Windows XP This product works with the

standard driver in Windows. Windows XP Service Pack 1 After installation, Install the drive label driver f rom the CDROM to use this product with the special drive labels.

17

Windows 2000 Windows 2000 Service Pack 3

After installation, Install the driver software from the CDROM.

21

Windows Millennium Edition (Me) This product works with the

standard driver in Windows. Install the icon driver from the CD-ROM to use this product with the special icons.

24

Windows

Windows 98 Windows 98 Second Edition (SE)

Install the driver software from the CD-ROM.

27

NOTE:

1) According to information from Apple Computer, Mac OS 9.0.2 and 9.0.3 do not start up if USB devices

are connected before starting up the OS. Upgrade to Mac OS 9.0.4 or greater. For more information, see Articl e Number 25139 of Tech Info Library of Apple Computer.

http://docs.info.apple.com/article.html?artnum=25139

(Registration with the Apple homepage to access this document, registration is free.)

2) Mac OS 8.1 and 8.5 are not supported. Upgrade to Mac OS 8.6 or greater before using this product.

3) Windows 95 is not supported.

4) The Hexa Media Drive will not operate properly under OS X Ver.10.0 – Ver.10.1.1.

OS X Ver.10.1.2 or greater is required.

5) For the latest information on the HMD, see our Web site,

http://www.yedata.com/support/.

6) We cannot guarantee operation for Macs with add-in USB port cards.

7) We cannot guarantee operation for PCs that have had OS upgrades.

8) Installation of the driver software before Windows2000 Service Pack 3 is possible. Howev er, when

using in the optimal environment, we recommend you to install Windows 2000 SP 3. If Windows 2000 SP 3 is installed, please install driver software from driver attached CD-ROM again.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 9

2. Macintosh

2.1. How to install (For Mac OS X Ver.10.1.2 or greater)

Installation of drivers for OS X is not required. This product works with the standard drivers built into OS X.

1) With the power of your Mac on, connect the HMD using the included USB cabl e to a

USB port on your Mac.

2) Insert a media card into the Hexa Media Drive. After a f ew seconds a new “removable

media” icon will appear in the Finder. You may insert multiple cards simultaneously into the various Hexa Media Drive Slots.

Double click a removable med ia ic on t o access the files on the cards.

NOTE: In OS X, when you insert multiple cards, the icons will all appear “removable media” icons.

The Hexa Media Drive will not operate properly under OS X Ver.10.0 – Ver.10.1.1. OS X Ver.10.1.2 or greater is required. Please be sure to update your Mac to V er.10.1.2 or greater. You can check your OS version by clicking the Apple logo in the upper left hand corner of your screen and select “About This Mac”. It will display your current version.

Insertion of the memory card which recorded the photograph with the digital camera may start image captur e so ftw are auto matic al ly. For information about how to use i mage capture, see your Macintosh manua l.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 10

2.2. How to install (For Mac OS 8.6, 9.0, 9.1 and 9.2)

You need to install the driver before connecting the Hexa Media Drive (HMD) to your Mac. Follow these steps to install the driver.

1) Insert the Hexa Media Drive Driver CD-ROM into your Macintosh. You must restart your

computer after insta ll at io n , so close all application programs before instal lat ion.

2) The CD-ROM window should open automatically. If it does not, double-click the CD-

ROM icon to open it.

3) Double-click the USB HMD Installer icon to start installation.

4) Click the Continue

button to continue installation.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 11

5) The version information, license agreement, and other data are displayed. Read them

and click the Continue

button.

6) Confirm the installation location (change it as necessary). Click the Install button to start

installation.

7) A warning message, saying that you must restart your computer after installation,

appears. Click Continue

to continue instal lat i on.

USB Hexa Media Drive Users Manual 149313-02 Rev. D

Page 12

8) Installation is now complete. Click Restart

to restart your computer.

9) After restart, connect t he at tached USB cable between the HMD and a USB port of your

Macintosh.

10) W hen you insert a memory card into the HMD, its corresponding drive icon appears in

your Finder, which indicates that you can access it. Double-click the icon to display files on the memory card.

Icon Corresponding Memory Card

Compact Flash

Microdrive

SmartMedia

Memory Stick

SD media Card

Multi Media Card

2.3. How to uninstall the driver software

To uninstall the driver software, turn off two files, "Y-E Data USB Driver" and "Y-E Data Storage sh i m" using t he Extension Manager of the control panel.

Y-E Data YD-8V14 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual