Yaskawa V1000 MicroDrives Catalog
,
Description
a
1/8 – 25 HP
V1000 Drive
The V1000 is a world-class compact current vector drive that defines a new world standard.
Demands for efficient production and better maintainability are on the rise, spurred by global
competition. Yaskawa drives have earned a reputation for high performance, high functionality
and high quality.
The V1000 provides a world of power in the palm of your hand!
V1000
Performance Features
• Ratings:
1/8 to 5 HP at 200-240 VAC 1-Phase
1/8 to 25 HP (ND) at 200-240 VAC 3-Phase
1/2 to 25 HP (ND) at 380-480 VAC 3-Phase
• Overload Capacity:
150% for 60 sec. (Heavy Duty)
120% for 60 sec. (Normal Duty)
• Control Methods: V/f Control,
Open Loop Current Vector Control,
PM Open Loop Current Vector Control
Simple closed loop speed control
• DC injection braking, ramp to stop
• Electronic reversing
• Adjustable accel/decel:0.01 to 6000 seconds
• Controlled speed range:
(1)
40:1
• Speed Regulation:
± 0.5 to 1% with slip compensation
± 0.2%
(2)
100:1
(2)
(1)
• Displacement power factor: 0.98
• Output frequency: 0 to 400 Hz
• Frequency resolution:
0.01 Hz with digital reference
0.06 / 60 Hz with analog reference
• Frequency accuracy:
0.01% with digital command
0.5% with analog command
• Volts / hertz ratio: infinitely adjustable pattern
• DC Injection braking: adjustable amplitude,
duration, current limited
• Torque boost: full range, auto
• Power loss ride-thru: 0.5 sec.
• Speed search
• Auto restart
• 3 Critical frequency rejection settings
• Slip Compensation
• Energy $avings Function
• Enhanced PID with loss of feedback function
Design Features
• Dual microprocessor logic
• Digital keypad operator, 5 digits
• LED status display
• Remote Mount Keypad Capability
• RJ-45 Style Digital Operator Connector
• 7 multifunction digital inputs
• 3 multifunction digital outputs
• Hardwire baseblock (EN954-1 Cat. 3)
• Programmable form C output contact for
customer use: 1A at 250 VAC or 30 VDC
• 24 VDC control logic compatible with
sourcing or sinking outputs (PNP or NPN)
• Carrier frequency: 15 kHz max; swing PWM
• 16 multi-speed settings plus jog speed
• 2 Remote speed references:
0-10 VDC (20 kohms) or isolated
4-20 mA (250 ohms)
• Signal follower: bias and gain
• 2 programmable open collector outputs
• Analog monitor output:
0-10 VDC proportional to output
frequency or output current
• Approximately 400 parameters
• Digital pulse train input (33 kHz max.)
• Cooling fan controlled by drive run/stop
• RS-422/485 Modbus 115 kbps
• UL recognized electronic overload
• MTBF: 28 years
• Built-in Dynamic Braking Transistor
• NEMA 1 enclosure
• Side-by-Side mounting
• Application presets
• Maintenance monitors
(1)
V/f Mode
(2)
Open Loop Current Vector Mode
Protective Features
• Current limit, stall prevention during
accel, decel, and run
• Motor and drive overload
• Over voltage prevention function
• Instantaneous over current
• Short circuit
• Under voltage
• Heatsink overheat
• Ground fault protection
• Over/under torque
• Short circuit withstand rating: 30K RMS
Service Conditions
• Ambient service temperature:
-10° to 40°C (+14° to 104°F) NEMA 1
-10° to 50°C (+14° to 122°F) Open Chassis
• Ambient storage temperature:
-20° to 60°C (-4° to 140°F)
• Humidity: to 95% non-condensing
• Altitude: to 3300 ft; higher by derating
• Service factor: 1.0
• Input voltage: -15% to +10%
200 to 240 VAC, 380 to 480 VAC
• Input frequency: +/-5%; 50/60 Hz
• Input phase sequence insensitive
Options
• Dynamic Braking resistor (external)
• Multi-lingual, full-text remote LCD w/ copy
• Profibus-DP, DeviceNet Communications
• Modbus TCP/IP, EtherNet/IP Communications
• DriveWizardTM Plus
• CASE software
• DIN rail mounting kit
• Y-Stick Copy Unit
Standards
• UL 508C (Power Conversion)
• CSA 22.2 No. 14-95
(Industrial Control Equipment)
• UL, cUL listed; CE marked
• RoHS compliant
• EN 50178 (LVD)
• EN 50081-2, EN 50082-2 (EMC)
• EN 954-1, Category 3 Safety Standard
• EN 61800-3
• IEC 529, 146
• FCC CFR 47 Part 15 Subpart B
(w/ External Filter)
• TUV
Page 1
Data subject to change without notice
PB.V1000.01, 8/1/07
Yaskawa Electric Americ
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
V1000
List Prices
V1000 Drive
Rated
Input
Voltage
200 - 240V
1-Phase
200 - 240V
3-Phase
380 - 480V
3-Phase
Drive Model
Number
CIMR-VU
BA0001FA
BA0002FA
BA0003FA
BA0006FA
BA0010FA
BA0012FA
BA0018FA
2A0001FA
2A0002FA
2A0004FA
2A0006FA
2A0010FA
2A0012FA
2A0020FA
2A0030FA
2A0040FA
2A0056FA
2A0069FA
4A0001FA
4A0002FA
4A0004FA
4A0005FA
4A0007FA
4A0009FA
4A0011FA
4A0018FA
4A0023FA
4A0031FA
4A0038FAA
Normal Duty
Rated Output
Current
(Amps)
(1)
Nominal HP
(2)
Rated Output
Heavy Duty
Current
(Amps)
1.2 1/8 & 1/4 0.8 1/8
1.9 1/4 1.6 1/4
3.3 1/2 & 3/4 3.0 1/2
6.0 1 5.0 3/4 & 1
9.6 2 & 3 8.0 2
12.0 3 11.0 3
17.5 5 17.5 5
1.2
1/8 & 1/4
0.8
1.9 1/4 1.6 1/4
3.5 1/2 & 3/4 3.0 1/2
6.0 1 5.0 3/4 & 1
9.6 2 & 3 8.0 2
12.0 3 11.0 3
19.6 5 17.5 5
30.0 7.5 & 10 25.0 7.5
40.0 10 33.0 10
56.0 20 47.0 15
69.0 25 60.0 20
1.2 1/2 1.2 1/2
2.1 3/4 & 1 1.8 3/4
4.1 2 3.4 1 & 2
5.4 3 4.8 3
6.9 4 5.5 3
8.8 5 7.2 4
11.1 7.5 9.2 5
17.5 10 14.8
24.0 15 18.0 10
31.0 20 24.0
38.0 25 31.0 20
(1)
Nominal HP
1/8
7.5 & 10
15
(2)
Drive List
Price $
(1) Normal Duty overload current rating is 120% of rated output current for 60 seconds;
Heavy Duty overload current rating is 150% of rated output current for 60 seconds
(2) Horsepower rating is based on standard NEMA B 4-pole motor design and NEC table 430.150
Full-Load Current, Three-Phase Alternating Current Motors
PB.V1000.01, 8/1//07
Data subject to change without notice
Yaskawa Electric America
Page 2
Loading...