Yard-Man 147Y834P401, 147W834H401 User Manual
Specifications and Main Features
- Model Series: 147Y834P401 and 147W834H401
- Type: Hydrostatic Tractors
- Engine: Internal combustion engine
- Transmission: Hydrostatic transmission
- Cutting Decks: Options for 46" and 50"
- Grass Catcher: Model 190- 083 for 46" deck only
- Safety Features: Safety interlock system, parking brake
- Fuel Capacity: Fuel tank capacity differs for each model, consult engine manual for further information
- Oil Type: The type of oil to use is: API classification SH/CD 20W50 motor oil.
- Tire Specifications: Maximum Recommend Tire Pressure of the tractor is 30 p.s.i.
- Cutting Height: The hydrostatic tractors are set to cut residential grass up to a height of 10”.
- Weight: Each model has a different weight, refer to manual to check
- Warranty: Two - year limited warranty covering defects in material and workmanship accomplishments.
Frequently Asked Questions
Q: How do I start the tractor? A: Make sure the PTO lever is disengaged, press the clutch-brake pedal, neutralize the hydrostatic control lever and turn the ignition key to START position to commence starting the tractor.
Q: What should I do if the engine does not crank? A: Please make sure the battery has been properly connected, is indeed charged and that the safety switch buttons are pressing all the way down , then please check for blown fuses and any loose connections.
Q: What is the recommended procedure for preserving hydrostatic transmission fluid?
A: Hydrostatic transmission fluid along with the filter should be changed after every 10 to 20 hours or work period after which it should be done every 200 hours or once yearly.
Q: Which fuel is the most suitable to use with the engine?
A: It is important to read the guidelines included with the engine since they instruct which type of gasoline is recommended for the equipment.
Q: Is it possible to mow the Slopes?
A: Yes but it must at slopes of less than gradient of 15°. When mowing slopes always move vertically instead of horizontally while being careful.
Q: What should be done in order to cut evenly along the deck?
A: It can easily be adjusted by the deck links at both sides such that the front part of the deck is about a quarter inch to three-eighth inches lower than the back part.
Q: What should I do in the case of mowing and hitting a foreign object?
A: Engine should be instantly switched off followed by disconnecting the spark plug followed by inspecting for damage before start using the mower again.
User Manual
Loading...