Yanmar YSAR023G User Manual

Product

Controller Mobile Communicator

Model

YSAR02-3G

Cellular Module Model

u-blox AG LISA-U200

Antenna Model

Taoglas Limited MA.110.C.AB.006.fh (Cable Length : 3m)

Bands

FCC-GSM 850/1900、CE-GSM 900/1800

FCC-UMTS 850/1700/1900、CE-UMTS 900/2100

Localization

GPS, SBAS, QZSS

CAN

2-channel

Digital Input

6-channel

Digital Output

2-channel

External Dimensions (W×H×D)

150mm×32mm×127.8mm

Weight

0.32kg

Case

PV resin

Power Supply

DC12V (DC10～16V)

Current Consumption

MAX 1A

Storage Temperature Range

-40℃～85℃

Operating Temperature Range

-30℃～65℃

Operating Humidity Range

95%(55℃)

Vibration Resistance

90m/s2(8.9G)10～500Hz

Test Standard

・CE

This device complies with the R&TTE Directive (1999/5/EC)

issued by the Commission of the European Community.

EN301 908-1, EN301 511, EN300 440-2

EN301 489-1,EN301 489-3,EN301 489-7,EN301 489-24

EN60950-1

EN62209-2

・FCC

FCC Part22, FCC Part24

FCC Part15b

OET Bulletin 65 Supplement C

SPECIFICATIONS

-1-

FCC DECLARATION OF CONFORMITY

Product Controller Mobile Communicator

Model YSAR02-3G

Responsible Party YANMAR CO., LTD.

Address 1600-4,Umegahara,Maibara,Shiga,Japan

Telephone [phone]

FCC STATEMENTS

1. Statement according to Part 15.105

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

2. Statement according to Part 15.19 and Canada CAN ICES-3 (B)/NMB-3(B)

This device complies with Part 15 of the FCC Rules and with CAN ICES-3 (B)/NMB-3(B) of

Industry Canada.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

-2-

3. Statement according to Part 15.21

Changes or modifications made to this equipment not expressly approved by YANMAR CO.,

LTD. may void the user's authorization to operate this equipment.

4. Statement according to RF Exposure

Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance of 2 cm between the

radiator and your body and at least 20 cm between the radiator and the head of all persons.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

A minimum separation distance of 2 cm must be maintained between the user’s body and the

device, 20 cm must be maintained between the user's head and the device, including the

antenna during body-worn operation to comply with the RF exposure requirements in Europe.

-3-