Yamaha Audio CDX-390 User Manual

CDX-390
Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Thank you for selecting this YAMAHA Compact Disc Player. Nous vous remercions d’avoir porté votre choix sur ce lecteur de disque
OWNER’S MANUAL
FEATURES
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc Repeat Play
Automatic Spacing Capability
Automatic Programming for Recording to
Tape
Automatic Peak Level Searching Capability
CD Synchronized Recording with a Compatible YAMAHA Tape Deck
Display Brightness Changing Capability
Remote Control Capability
CONTENTS
Safety Instructions ............................................... 2
Identification of Components ............................... 4
Connections......................................................... 6
Basic Operation ................................................... 7
Random-Sequence Play.................................... 11
Repeat Play ....................................................... 11
Program Play..................................................... 12
Index Search...................................................... 13
Track Programming for Recording to Tape ....... 14
CD Synchronized Recording ............................. 18
Notes about the Remote Control
Transmitter ......................................................... 19
Notes about Handling Compact Discs............... 19
Troubleshooting.................................................. 20
Specifications..................................................... 20
MODE D’EMPLOI
CARACTERISTIQUES
Lecture programmable à accès direct
Lecture en séquence aléatoire
Lecture répétée de plage unique/disque entier
Fonction d’espacement automatique
Programmation automatique de pour
l’enregistrement Fonction de recherche automatique du niveau
de crête Enregistrement synchronisé de disque
audionumérique avec un magnétophone à cassettes compatible YAMAHA Fonction de modification de luminosité de
l’affichage Fonctionnement par télécommande
TABLE DES MATIERES
Attention ............................................................. 21
Identification des composants ............................ 22
Connexions ......................................................... 24
Fonctionnement de base .................................... 25
Lecture en séquence aléatoire ........................... 29
Lecture repetée .................................................. 29
Lecture programmée .......................................... 30
Recherche d’index .............................................. 31
Programmation des plages pour enregistrement sur bande Enregistrement synchronise d’un
disque audionumérique ........................................36
Remarques concernant la télécommande .......... 37
Remarques concernant la manipulation des disques
Dépistage de pannes .......................................... 38
Caractéristiques techniques ............................... 38
.................................... 32
... 37

SAFETY INSTRUCTIONS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the operating instructions or as marked on the unit.
2
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
We Want You Listening For A Lifetime
(for US customers only)
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
IMPORTANT!
Please record the serial number of this unit in the space below.
Model: Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE­CAUSING EQUIPMENT REGULATIONS.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.
6 Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
7 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit is faulty.
8. Do not place another component on top of this unit,
because to do so will discolor or damage the surface of the unit.
9. To prevent damage by lightning, disconnect the power
cord from the household AC outlet during an electrical storm.
10. When disconnecting the power cord from the household
AC outlet, grasp the plug; do not pull the cord.
11. When moving the unit, be sure to first disconnect the
power cord from the household AC outlet, and disconnect cords connected to other equipment.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
WARNING
To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
DANGER: The use of optical instrument with this product will increase eye hazard.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.
3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW* * This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick­up Block.
Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620. The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its subsidiaries.
3
POWER
SKIP/SEARCH
+
101234567890
STOP
PLAY/ PAUSE
OPEN/CLOSE

IDENTIFICATION OF COMPONENTS

* ( ) indicates the page number on which the control part is best described.
FRONT PANEL
The control functions on the main unit and on the remote control transmitter are virtually identical, with the exceptions below.
* The PLAY/PAUSE button on the main unit has both the
functions of the PLAY button and the PAUSE button on the remote control transmitter.
* The SKIP/SEARCH button on the main unit has both the
functions of the SKIP buttons and the SEARCH buttons on the remote control transmitter.
Remote control sensor (p. 19)
Display panel
POWER switch (p. 7)
Disc tray (p. 7)
4
Downloaded from:
10
DIMMER
TIME
OPEN/CLOSE
PROG
CLEAR
SPACES/
F
RANDOM
REPEAT
123
4
56
7890
+
SKIP
PLAY
PAUSE
SEARCH
STOP
INDEX
TAPE PEAK
SYNCHRO
* ( ) indicates the page number on which the control part is best described.
REMOTE CONTROL TRANSMITTER
TAPE button (p. 14)
OPEN/CLOSE button (p. 7)
English
DIMMER button (p. 10) CLEAR button (p. 13)
PROG button (p. 12)
TIME button (p. 10)
PEAK button (p. 17)
SPACE button (p. 9)
REPEAT button (p. 11)
RANDOM button (p. 11)
Numeric buttons (p. 8)
PAUSE button (p. 8)
SKIP buttons (p. 8) PLAY button (p. 7)
SEARCH buttons (p. 9)
SYNCHRO button (p. 18)
STOP button (p. 8) INDEX button (p. 13)
Downloaded from:
5

CONNECTIONS

LINE OUT
CD
Before making any connections, switch OFF the power to
the unit and the amplifier or other component. Connections should be made to the correct input terminals of
the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. Be sure that the left (“L”) and right (“R”) LINE OUT terminals
are connected to the corresponding (left and right) terminals of the amplifier or other component. If the placement of this unit causes noise to other equipment,
such as a tuner, separate them from each other.
CDX-390
Connection cord (included)
To AC outlet
Amplifier
6
Downloaded from:
3 4 5 6 7 8 9 10 11 12
SINGLE
➀➁
1 2 3 4 5 6 7 8 9 10 11 12
TOTAL
OPEN/CLOSE
OPEN/CLOSE
POWER
This manual describes how to operate this unit by using the remote control transmitter.
10
DIMMER
TIME
OPEN/CLOSE
PROG
CLEAR
SPACES/
F
RANDOM
REPEAT
123
4
56
7890
+
SKIP
PLAY
PAUSE
SEARCH
STOP
INDEX
TAPE PEAK
4
2, 3
To operate this unit on the front panel, use the corresponding buttons on the front panel.

BASIC OPERATION

1
English
1 Turn the power on.
POWER
2 Load a disc.
Display information at disc play
Label side upward
Disc tray
3 Close the disc tray.
4
Play will begin from the first track of the disc.
Notes
After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the total recorded time of the disc for a few seconds.
PLAY
Shows the track number selected or being played.
Shows the time displays. (Refer to “Selecting time
displays” on page 10.) Displays the numbers that correspond to the numbers of
tracks (as high as number 20) on the disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance.
To turn off the power
Press the POWER switch again.
Additionally, you can close the disc tray by pressing the
PLAY (PLAY/PAUSE) button, a numeric button or the RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the disc.
7
Loading...
+ 15 hidden pages