Yamaha Audio CDC-901 User Manual

CDC-901/501
Natural Sound Compact Disc Player
Thank you for selecting this YAMAHA Compact Disc Player.
OWNER’S MANUAL
CONTENTS
Safety Instructions......................................... 2
Features ........................................................ 4
Connections .................................................. 5
Basic Operation............................................. 8
Random-Sequence Play.............................. 13
Program Play............................................... 14
Repeat Play................................................. 16
Index Search ............................................... 16
CD Synchronized Recording ...................... 17
Track Programming for Recording to Tape
for CDC-901 only ....................................... 18
Notes about the Remote Control Transmitter
Notes about Handling Compact Discs......... 22
Troubleshooting........................................... 23
Specifications .............................................. 23
......
22

SAFETY INSTRUCTIONS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the operating instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted to
a wall or ceiling only as recommended by the manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
2
IMPORTANT!
Please record the serial number of this unit in the space below.
Model: Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.
6 Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
7 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit is faulty.
8. Do not place another component on top of this unit,
because to do so will discolor or damage the surface of the unit.
9. To prevent damage by lightning, disconnect the power
cord from the household AC outlet during an electrical storm.
10. When disconnecting the power cord from the household
AC outlet, grasp the plug; do not pull the cord.
11. When moving the unit, be sure to first disconnect the
power cord from the household AC outlet, and disconnect cords connected to other equipment.
CAUTION FOR CARRYING THIS UNIT
Be sure not to carry or tip the unit with discs remaining in it.
CAUTION FOR MOVING THIS UNIT
When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display indicates as follows.
Never switch off the power if the display is not pictured as above, otherwise the unit will get out of order during moving because the internal mechanism is not locked.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780nm
• Emission Duration: continuous
• Laser Output: max. 44.6µW* * This output is the value measured at a distance of about
200mm from the objective lens surface on the Optical Pick­up Block.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
WARNING
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only.
To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
DANGER: The use of optical instrument with this product will increase eye hazard.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
3
FCC INFORMATION
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.
3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

FEATURES

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620. The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its subsidiaries.
5-Disc Carousel Auto-changer
Full Opening Disc Tray for Changing 5 Discs at a Time
PLAYXCHANGE; Disc Changing Capability while Playing Another
Random Access Programmable Play
Random-Sequence Play
Single Track/Entire Disc/All Disc Repeat Play
Display Brightness Changing Capability
Remote Control Capability
Disc Scanning Capability Useful for Disc Searching or Disc Checking
CD Synchronized Recording with a Compatible Y AMAHA Tape Deck
CDC-901 only
Automatic Programming for Recording to Tape
Automatic Peak Level Searching Capability
Optical Digital Output
4

CONNECTIONS

CD DIGITAL IN
OPTICAL
LINE OUT DIGITAL
AUDIO
OUT
L
R
OPTICAL
LINE OUT
L
R
Before making any connections, switch OFF the power to the unit and the amplifier or other component.
Connections should be made to the correct input terminals of the amplifier or other component.
If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other.
CDC-501
To AC outlet
CDC-901
To AC outlet
Connection cord
(included)
Choose one of the ways listed below to connect this unit to your amplifier.
When the LINE OUT (analog) terminals of this unit are used ( ➊)
Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component.
Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.
CDC-901 only
Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL buttons.
Optical fiber cable (not included)
CDC-901 only
When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used ( ➋)
Before using this terminal, remove the terminal’s cover by pulling it.
Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust.
Set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL buttons.
This terminal can also be connected to the optical input terminal of a digital audio tape deck (DAT) etc. to record CD onto tape directly.
Amplifier
5
POWER
I2345
SKIP/SEARCH
+I0 I 2 3 4 5 6 7 8 9 0
PROG
PLAYXCHANGE
OPEN/CLOSE
PLAY/ PAUSE
STOP
OUTPUT LEVEL
DOWN UP
PHONES
DISC
NATURAL SOUND COMPACT DISC PLAYER
PEAK

IDENTIFICATION OF COMPONENTS

POWER
I2345
SKIP/SEARCH
PLAYXCHANGE
OPEN/CLOSE
PLAY/ PAUSE
STOP
DISC
NATURAL SOUND COMPACT DISC PLAYER
* ( ) indicates the page number on which the control part is best described.
FRONT PANEL
* Control functions other than shown below are the same with
the corresponding ones on the remote control transmitter.
CDC-655
CDC-901
POWER switch (p. 8)
Disc tray (p. 8)
* The PLAY/PAUSE button on the main unit has both the
functions of the PLAY button and the PAUSE button on the remote control transmitter.
* The SKIP/SEARCH button on the main unit has both the
functions of the SKIP buttons and the SEARCH buttons on the remote control transmitter.
PHONES jack (p. 12)
PLAYXCHANGE button (p. 9)
DISC-select buttons (p. 8)
CDC-501
Display panel
Remote control sensor (p. 22)
POWER switch (p. 8)
Disc tray (p. 8)
PEAK button (p. 21)
DISC-select buttons (p. 8)
OUTPUT LEVEL control (p. 12)
(“UP” is identical with “+” and “DOWN” with “–” of the OUTPUT LEVEL buttons on the remote control transmitter.)
PLAYXCHANGE button (p. 9)
Display panel
6
Remote control sensor (p. 22)
* ( ) indicates the page number on which the control is best described.
DIMMER
TIME
OPEN/CLOSE
PROG
REPEAT
RANDOM
123
4
56
7890
SKIP
PLAY
PAUSE
SEARCH
STOP
INDEX
DISC SKIP
DISC
SCAN
10
+
MODE
SYNCHRO
OUTPUT LEVEL
+
TAPE
CLEAR
CDC-501
CDC-901
REMOTE CONTROL TRANSMITTER
TAPE button (p. 18)
DIMMER button (p. 12)
CLEAR button (p. 15)
OPEN/CLOSE button (p. 8)
PROG button (p. 14)
Numeric buttons (p. 10)
DISC SKIP buttons (p. 8)
SKIP buttons (p. 10)
SEARCH buttons (p. 10)
SYNCHRO button (p. 17)
TIME button (p. 11)
REPEAT button (p. 16)
RANDOM button (p. 13)
Disc play MODE-select button (p. 8)
DISC SCAN button (p. 11)
PAUSE button (p. 9)
PLAY button (p. 8) STOP button (p. 9)
INDEX button (p.16)
CDC-901 only
OUTPUT LEVEL buttons (p. 12)
7
POWER
OPEN/CLOSE
OPEN/CLOSE
MODE
PLAY
1DISC 5DISC
DISC SKIP
PLAY
This manual describes how to operate this unit by using the remote control transmitter.
DIMMER
TIME
OPEN/CLOSE
PROG
REPEAT
RANDOM
123
4
56
7890
SKIP
PLAY
PAUSE
SEARCH
STOP
INDEX
TAPE
DISC SKIP
DISC SCAN
10
+
MODE
2, 3
5
4 5
1
DIMMER
TIME
OPEN/CLOSE
PROG
REPEAT
RANDOM
123
4
56
7890
SKIP
PLAY
PAUSE
SEARCH
STOP
INDEX
CLEAR
DISC SKIP
DISC SCAN
10
+
MODE
5
5
2, 3
4
234
DISC
To operate this unit on the front panel, use the corresponding buttons on the front panel.

BASIC OPERATION

1
2
Label side upward
CDC-901
CDC-501
4
Select the disc play mode (1DISC or 5DISC) while watching the display.
Shows the selected disc mode.
“1DISC” mode: The unit will play a designated disc only. “5DISC” mode: The unit will play all discs in the tray in
sequence.
Start play from the first track of the disc 1.
5
3 Close the disc tray
8
Disc tray
* If necessary, select a desired disc by using the DISC SKIP
buttons or a DISC-select button.
or
(On the front panel)
To turn off the power
Press the POWER button again.
Loading...
+ 17 hidden pages