Yamaha UX96 User Manual
USB-MIDI INTERFACE
Owner's Manual
Bedienungsanleitung
Mode d'emploi
EnglishDeutschFrançais
SPECIAL MESSAGE SECTION
This product utilizes an external power supply
(adapter). DO NOT connect this product to any
power supply or adapter other than one
described in the manual, on the name plate, or
specifically recommended by Yamaha.
WARNING: Do not place this product in a
position where anyone could walk on, trip over,
or roll anything over power or connecting cords
of any kind. The use of an extension cord is not
recommended! If you must use an extension
cord, the minimum wire size for a 25' cord (or
less) is 18 AWG. NOTE: The smaller the AWG
number, the larger the current handling capacity.
For longer extension cords, consult a local
electrician.
This product should be used only with the
components supplied or; a cart, rack, or stand
that is recommended by Yamaha. If a cart, etc.,
is used, please observe all safety markings and
instructions that accompany the accessory
product.
SPECIFICATIONS SUBJECT TO
CHANGE:
The information contained in this manual is
believed to be correct at the time of printing.
However, Yamaha reserves the right to change
or modify any of the specifications without notice
or obligation to update existing units.
Do not attempt to service this product beyond
that described in the user-maintenance
instructions. All other servicing should be
referred to qualified service personnel.
This product, either alone or in combination with
an amplifier and headphones or speaker/s, may
be capable of producing sound levels that could
cause permanent hearing loss. DO NOT operate
for long periods of time at a high volume level or
at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you
should consult an audiologist. IMPORTANT: The
louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and/
or accessory mounting fixtures that are either
supplied with the product or as optional
accessories. Some of these items are designed
to be dealer assembled or installed. Please
make sure that benches are stable and any
optional fixtures (where applicable) are well
secured BEFORE using. Benches supplied by
Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of
knowledge relating to how a function or effect
works (when the unit is operating as designed)
are not covered by the manufacturer's warranty,
and are therefore the owners responsibility.
Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are
both user safe and environmentally friendly. We
sincerely believe that our products and the
production methods used to produce them, meet
these goals. In keeping with both the letter and
the spirit of the law, we want you to be aware of
the following:
Disposal Notice:
Should this product become damaged beyond
repair, or for some reason its useful life is
considered to be at an end, please observe all
local, state, and federal regulations that relate to
the disposal of products that contain lead,
batteries, plastics, etc. If your dealer is unable to
assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The graphic below indicates the location of the
name plate for this model. The model number,
serial number, power requirements, etc., are
located on this plate. You should record the
model number, serial number, and the date of
purchase in the spaces provided below and
retain this manual as a permanent record of your
purchase.
Model
Serial No.
Purchase Date
93-DC
PLEASE KEEP THIS MANUAL
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are
not limited to, the following:
• Do not open the instrument or attempt to disassemble the internal parts or modify them in any
way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it
inspected by qualified Yamaha service personnel.
• Do not expose the instrument to rain, use it near
water or in damp or wet conditions, or place
containers on it containing liquids which might
spill into any openings.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or
damage to the instrument or other property. These precautions include, but are not limited to, the following:
• Do not place the USB cable near heat sources
such as heaters or radiators, and do not excessively bend or otherwise damage the cable,
place heavy objects on it, or place it in a position
where anyone could walk on, trip over, or roll
anything over it.
• Unplug the USB cable when not using the
instrument, or during electrical storms.
• Before connecting the instrument to other electronic components, turn off the power for all
components. Before turning the power on or off
for all components, set all volume levels to minimum. Also, be sure to set the volumes of all
components at their minimum levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
• Do not expose the instrument to excessive dust
or vibrations, or extreme cold or heat (such as in
direct sunlight, near a heater, or in a car during
the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not use the instrument near other electrical
products such as televisions, radios, or speakers, since this might cause interference which
can affect proper operation of the other products.
• If the USB cable becomes frayed or damaged,
or if there is a sudden loss of sound during use
of the instrument, or if any unusual smells or
smoke should appear to be caused by it, immediately disconnect the USB cable, and have the
instrument inspected by qualified Yamaha service personnel.
• Before cleaning the instrument, always remove
the USB cable. Never insert or remove a USB
cable with wet hands.
• Do not place the instrument in an unstable position where it might accidentally fall over.
• Before moving the instrument, remove all connected cables.
• When cleaning the instrument, use a soft, dry
cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths. Also, do not place vinyl, plastic or rubber
objects on the instrument, since this might discolor the panel or keyboard.
• Do not rest your weight on, or place heavy
objects on the instrument, and do not use
excessive force on the connectors.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or
destroyed.
(3)-6
Welcome to the UX96
Thank you for choosing the Yamaha UX96 USB-MIDI interface.
The UX96 is a MIDI interface that features fast data transfer via USB connection
and simultaneous playback of up to 96 channels. Connect the UX96 to a computer
that has a USB terminal and enjoy the advantages of digital music.
Please read this owner’s manual thoroughly to make the best use of the UX96.
After you read this manual, please keep it in a safe place for future reference.
Table of Contents
UX96 Features.................................................................................. 5
Package Contents............................................................................. 6
System Requirements .......................................................................7
Specifications ................................................................................... 7
Parts and Functions ..........................................................................8
Connection ......................................................................................9
Installing the Driver ........................................................................ 10
Changing the driver setting (MIDI Patch Screen)............................ 20
Troubleshooting (FAQ)................................................................... 25
• The screen displays in this Owner’s Manual are intended for instructional pur-
poses, and may appear somewhat different from the screens that appear on
your computer.
®
• OMS
• The company names and product names in this Owner’s Manual are the trade-
and are trademarks of Opcode Systems, Inc.
marks or registered trademarks of their respective companies.
4
UX96 Features
● 96-channel Simultaneous Playback
You can use both MIDI IN/OUT terminals and the TO TG/INST terminal
(equivalent to a serial port on a computer) simultaneously. In this way, you can
build a powerful music production environment with 6 MIDI OUT ports (96
channels) and 2 MIDI IN ports (32 channels).
● Easy Hot Swap Connection
With a USB connection, you can connect and disconnect the USB cable while the
power to the computer is on. The UX96 operates on USB bus power and does not
require a power adaptor.
● USB Fast Data Transfer
USB connection enables a very quick response during multiport simultaneous
performance.
● Supports Windows and Macintosh
The UX96 supports Windows 98/Me/2000 and Mac OS 8.5 or higher (including
OS 9.1).
Notes on USB
Never connect or disconnect a USB cable under any of the following conditions.
Otherwise, the computer may lock up or UX96 functions may be disabled:
• The computer is checking the device or loading the driver.
• The computer is starting or quitting the OS.
• The computer is in or canceling Save Energy (Sleep) mode.
• A MIDI application program is running.
Also, do not perform any of the following operations. Otherwise, the computer
may lock up or the UX96 functions may be disabled:
• Do not frequently connect or disconnect the cables.
• Do not place the computer in or cancel Save Energy (Sleep) mode during MIDI
data transfer.
• Do not connect or disconnect cables, restart the computer, or install the driver
while a large amount of data is being transferred.
If you are using Windows 2000, Save Energy mode may be disabled depending on
NOTE
your environment (USB Host Controller etc.) Even in this case, if you disconnect and
connect the USB cable, UX96 functions will be enabled again.
5
Package Contents
The UX96 package contains the following items. Check the contents for missing
items.
• USB-MIDI interface (UX96 main unit)
• CD-ROM (Windows/Macintosh hybrid CD)
• USB cable
• Owner’s manual (this book)
About the included software
The included CD-ROM contains the following software (driver).
[Windows]
• USB-MIDI driver (YAMAHA USB-MIDI Driver)
You need this driver to operate the UX96. See page 11 for information on
installing the driver.
[Macintosh]
• OMS
This is a MIDI driver for Macintosh provided by Opcode Systems.
See page 15 and the included “OMS_2.3_Mac.pdf” OMS manual for
information on installing and using the driver.
• USB-MIDI driver (YAMAHA USB-MIDI Driver)
You need this driver to operate the UX96.
Be sure to install the OMS driver first, then install this driver. See page 15 for
information on installing the driver.
6
System Requirements
[Windows]
OS: Windows98/Me/2000
Computer: USB-supported IBM-PC or compatible computer
CPU: Pentium 166MHz or higher
Memory: 32 MB or higher (64 MB or higher is recommended)
Hard Disk: 2 MB or more of free space
[Macintosh]
OS: MacOS 8.5 through OS 9.1
Computer: Macintosh computer with built-in USB port
With some iMac models, you need to install “iMac Update 1.1,” provided by Apple
NOTE
Computer. This program improves the USB software. For more information, visit the
Apple Computer web site (www.apple.com).
Memory: 64 MB or higher (128 MB or higher is recommended)
Turn off virtual memory.
NOTE
Hard Disk: 2 MB or more of free space
Other: OMS 2.3.6 or later (included in the CD-ROM in the
package)
Specifications
Terminals: MIDI IN terminal, MIDI OUT terminal, TO TG/INST
terminal, USB terminal
Power Supply: USB bus power supply
Dimensions: 77(W) × 77(D) × 33(H) [mm]
Weight: 80g
Option: 8-pin peripheral cable for Apple Macintosh
Specifications and descriptions in this Owner’s Manual are for information
purposes only. Yamaha Corp. reserves the right to change or modify products or
specifications at any time without prior notice. Since specifications, equipment or
options may not be the same in every locale, please check with your Yamaha
dealer.
7
Parts and Functions
USB-MIDI INTERFACE
6
1 Power LED
This LED lights up when the USB
terminal is connected and the
power is being supplied to the
UX96.
2 Terminal LEDs
These LEDs light up when MIDI
signal passes through the
corresponding terminals.
3 TO TG/INST terminal
Connect this terminal to the TO
HOST terminal on the MIDI device.
Use an optional 8-pin system
peripheral cable for Apple
Macintosh for connection.
Set the HOST SELECT switch of
NOTE
the connected MIDI device to
“PC-1” or “Mac,” regardless of
the computer you are using.
MIDI IN
MIDI OUT
TO TG/INST
12
4 MIDI OUT terminal
This terminal transmits MIDI signals
to connected MIDI devices. Use an
optional MIDI cable for connection.
5 MIDI IN terminal
This terminal receives MIDI signals
from connected MIDI devices. Use
an optional MIDI cable for
connection.
6 USB terminal
Connect this terminal to a
computer or a USB hub using a
USB cable.
5
4
3
8
Connection
This chapter explains how to connect MIDI devices, such as a tone generator and
a MIDI keyboard, to the UX96.
1. Connecting a computer
Connect the USB terminal of a computer to the USB terminal of the UX96
using a USB cable. At this time, you do not have to turn off the power to the
computer.
Computer
See page 10 for information
on installing the driver.
2. Connecting the TO TG/INST terminal to a MIDI device
Connect the TO HOST terminal of a MIDI device to the TO TG/INST terminal
of the UX96 using an optional serial cable (8-pin Macintosh peripheral cable).
At this time, set the HOST SELECT switch of the MIDI device to “PC-1” or
“Mac,” regardless of the computer you are using.
When you are using the TO TG/INST terminal, you can use five MIDI OUT
ports and one MIDI IN port to control the connected MIDI device.
UX96
Serial cable
USB cable
Set the HOST SELECT
switch of the MIDI
device to “PC-1” or
“Mac.”
MIDI device
UX96
3. Connecting the MIDI terminals to a MIDI device
Use optional MIDI cables to connect the MIDI IN terminal of the MIDI device
to the MIDI OUT terminal of the UX96. Also, connect the MIDI OUT terminal
of the MIDI device to the MIDI IN terminal of the UX96. At this time, set the
HOST SELECT switch of the MIDI device to “MIDI.”
9
Loading...