Yamaha RX-495 User Manual

RX-495/395

OWNER’S MANUAL

MODE D’EMPLOI

MANUAL DE INSTRUCCIONES

Natural Sound Stereo Receiver

Ampli-syntoniseur stéréo de la série “Natural Sound”

Receptor estéreo de Sonido Natural

Thank you for selecting this YAMAHA stereo receiver. Nous vous remercions pour avoir porté votre choix sur ce récepteur stéréo YAMAHA. Muchas gracias por haber adquirido este receptor estéreo YAMAHA.

1 Read Instructions – All the safety and operating

instructions should be read before the unit is operated.

2 Retain Instructions – The safety and operating instructions

should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other instructions

should be followed.

5 Water and Moisture – The unit should not be used near

water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6 Carts and Stands – The unit should be used only with a

cart or stand that is recommended by the manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn.

7 Wall or Ceiling Mounting – The unit should be mounted to

a wall or ceiling only as recommended by the manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances that produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the operating instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should be

unplugged from the outlet when left unused for a long period of time.

14 Object and Liquid Entry – Care should be taken so that

objects do not fall into and liquids are not spilled into the inside of the unit.

15 Damage Requiring Service – The unit should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into the

unit; or

C. The unit has been exposed to rain; or D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet damaged.

16 Servicing – The user should not attempt to service the unit

beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be taken

so that the grounding or polarization is not defeated.

SAFETY INSTRUCTIONS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

•

Explanation of Graphical Symbols

CAUTION

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620. The above statements apply ONLY to those products

distributed by Yamaha Corporation of America or its subsidiaries.

Note to CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

FCC INFORMATION (for US customers only)

SPECIAL NOTES FOR FCC COMPOSITE DEVICE (for US customers only)

This device is a composite system. The digital device component may not cause harmful interference.

19 For US customers only:

Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810–20)

GROUNDING CONDUCTORS (NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H)

ELECTRIC SERVICE EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

We Want You Listening For A Lifetime

(for US customers only)

English

●

RX-495

70W + 70W (8Ω) RMS Output Power,

0.04% THD, 20–20,000 Hz

RX-395

45W + 45W (8Ω) RMS Output Power,

0.04% THD, 20–20,000 Hz

●

High Dynamic Power, Low Impedance Drive Capability

●

Continuously Variable Loudness Control

●

40-Station Random Access Preset Tuning

●

Automatic Preset Tuning

●

Preset Station Shifting Capability (Preset Editing)

●

IF Count Direct PLL Synthesizer Tuning System

●

SLEEP Timer

●

Remote Control Capability

●

RX-495 only

PURE DIRECT Switch to Reproduce the Purest Source Sound

Safety Instructions.......................................... 2

Features ........................................................ 4

Supplied Accessories .................................... 4

Caution .......................................................... 5

Controls and Their Functions ........................ 6

Connections ................................................ 10

Basic Operations ......................................... 14

Tuning Operations ....................................... 17

Preset Tuning .............................................. 18

Notes about the Remote Control Transmitter

..................................................................... 21

Troubleshooting ........................................... 22

Specifications .............................................. 23

FEATURES CONTENTS

SUPPLIED ACCESSORIES

After unpacking, check that the following parts are contained.

RX-495

RX-395

Remote Control Transmitter AM Loop AntennaIndoor FM Antenna

Batteries (size AA, R6, UM-3) Antenna adapter

<U.S.A. and Canada model only>

English

CAUTION : READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a cool, dry, clean place – away from

windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.

3 Do not operate the unit upside-down. It may overheat,

possibly causing damage.

4 Never open the cabinet. If something drops into the set,

contact your dealer.

5 The openings on the cabinet assure proper ventilation of

the unit. If these openings are obstructed, the temperature inside the cabinet will rise rapidly. Therefore, avoid placing objects against these openings, and install the unit in well-ventilated condition. Make sure to allow a space of at least 10 cm behind, on the both sides and above the top panel of the unit. Otherwise it may not only damage the unit, but also cause fire.

6 Do not use force on switches, controls or connection

wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wires themselves.

7 Do not attempt to clean the unit with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

8 Always set the VOLUME control to “–

∞

” before starting the audio source play. Increase the volume gradually to an appropriate level after the play back has been started.

9 To prevent lightning damage, pull out the power cord and

remove the antenna cable during an electrical storm.

10 Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding that the unit is faulty.

11 AC outlet

Do not connect audio equipment to the AC outlet on the rear panel if that equipment requires more power than the outlet is rated to provide.

12 Voltage Selector (General Model only)

The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

Voltages are 110–120/220–240V AC, 50/60 Hz.

IMPORTANT

Please record the serial number of this unit in the space below.

Serial No.: The serial number is located on the rear of the unit.

Retain this Owner’s Manual in a safe place for future reference.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION (FOR CANADA MODEL)

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

FOR CANADIAN CUSTOMER

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULATIONS.

The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

FREQUENCY STEP switch (General Model only)

Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.

FRONT PANEL

RX-495

21A/B/C/D/E 3 4

PURE DIRECT

6578

TAPE 1TAPE 2

MONITOR

AUX PHONO

TUNER CD

POWER

TUNING MODE

AUTO/MAN'L MONO

FM/AM TUNING EDIT MEMORY

MAN'L/AUTO FM

DOWN UP

SPEAKERSPHONES A

OFF

VOLUME

NATURAL SOUND STEREO RECEIVER

BASS

l0l

TREBLE

l0l

BALANCE

l0l

LOUDNESS

FLAT

–dB

COPY

PRESET STATIONS

PRESET

MHz

MEMORY

AM FM

TAPE MONITOR 12

STEREO

l00

ENTER

SLEEP

AUTO TUNING

30dB

RX-395

21A/B/C/D/E 3 4

6578

TAPE

MONITOR

AUX PHONO

TUNER CD

POWER

TUNING MODE

AUTO/MAN'L MONO

FM/AM TUNING EDIT MEMORY

MAN'L/AUTO FM

DOWN UP

SPEAKERSPHONES A

OFF

VOLUME

NATURAL SOUND STEREO RECEIVER

BASS

l0l

TREBLE

l0l

BALANCE

l0l

LOUDNESS

FLAT

–dB

PRESET STATIONS

PRESET

MHz

MEMORY

AM FM

TAPE MONITOR 12

STEREO

l00

ENTER

SLEEP

AUTO TUNING

30dB

132456789

0A B C DEFG H

13245678

0A B C DEFG H

CONTROLS AND THEIR FUNCTIONS

English

1 POWER switch

Press this switch to switch the power on. Press it again to switch the power off. * Standby mode

While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the standby mode. (In this mode, the power indicator is half illuminated.)

2 Remote control sensor

Receives signals from the remote control transmitter.

3 Display panel

Shows station frequencies and various information. (Refer to the next page for details.)

4 FM/AM buttons

Press this button to switch the reception band to FM or AM.

5 TUNING DOWN/UP button

Used for tuning. Press the “UP” side to tune in to higher frequencies, and press the “DOWN” side to tune in to lower frequencies.

6 EDIT button

This button is used to exchange the places of two preset stations with each other.

7 MEMORY (MAN’L/AUTO FM) button

When this button is pressed, the MEMORY indicator flashes for about 5 seconds. During this period, press the desired PRESET STATIONS button to enter the displayed station into the memory.

When this button is pressed and holded for about 3 seconds, the automatic preset tuning begins.

8 Input selector buttons

Select a program source to listen to. When a button is pressed, the name of selected source lights up on the display.

9 PURE DIRECT switch RX-495 only

Press this switch to listen to a source in the purest sound. (Refer to page 16 for details.)

0 PHONES jack

When you listen with headphones, connect the headphones to the PHONES jack. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

A SPEAKERS switches

Set the switch A or B (or both A and B) for the speaker system (connected to this unit) you will use to the ON position. Set the switch for the speaker system you will not use to the OFF position.

B TUNING MODE (AUTO/MAN’L) button

Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO TUNING” lights up on the display. To select the

manual tuning mode, press this button so that “AUTO

TUNING” goes off.

C Tone controls

BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

D BALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

E A/B/C/D/E button

Press this button to select a desired group (A–E) of preset stations.

F PRESET STATIONS buttons

Used to enter as many as 40 station frequencies into the memory.

G Continuously variable LOUDNESS control

Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume.

H VOLUME control

Used to raise or lower the volume level.

PHONES

DISPLAY PANEL

AUTO TUNING

PRESET

STEREO

MHz

40 6020l00

MEMORY

SLEEP

TAPE MONITOR

TAPE MONITOR TAPE MONITOR 12

1 Multi-information display

Displays various information, for example station frequency, preset station number and name of selected program source.

2 STEREO indicator

Lights up when an FM stereo broadcast with sufficient signal strength is received.

3 Signal-level meter

Indicates the signal level of the received station. If multipath interfernce is detected, the indication decreases.

4 MEMORY indicator

When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and one of the PRESET STATIONS buttons.

5 TAPE MONITOR indicator

RX-395

Lights up when the tape deck is selected as the input source by pressing the TAPE MONITOR button.

RX-495

When the first tape deck is selected as the input source by pressing the TAPE 1 button, “TAPE MONITOR 1” lights up, and when the second tape deck is selected by pressing the TAPE 2 button, “TAPE MONITOR 2” lights up.

6 AUTO TUNING indicator

This indicator lights up when this unit is in the automatic tuning mode.

7 SLEEP indicator

Lights up while the built-in SLEEP timer is functioning.

RX-395 RX-495

132

467

+ 17 hidden pages