Yamaha PDX-30 Owners Manual
PDX-30
Portable Player Dock
RTL
OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
CAUTION
Read this before operating your unit.
To assure the finest performance, please read this manual carefully. Keep it in a
safe place for future reference.
Install this unit in a well ventilated, cool, dry, clean place - away from
1�
direct sunlight, heat sources, vibration, dust, moisture, and/or cold. (Do not
use/keep this unit in a car etc.)
Locate this unit away from other electrical appliances, motors, or
2�
transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from cold to hot,
3�
and do not locate this unit in an environment with high humidity (i.e. a
room with a humidifier) to prevent condensation inside this unit, which
may cause an electrical shock, fire, damage to this unit, and/or personal
injury.
Avoid installing this unit where foreign objects may fall onto this unit
4�
and/or this unit may be exposed to liquid dripping or splashing. On the top
of this unit, do NOT place:
Other components, as they may cause damage and/or discoloration on
−
the surface of this unit.
Burning objects (i.e. candles), as they may cause fire, damage to this
−
unit, and/or personal injury.
Containers with liquid in them, as they may fall and liquid may cause
−
electrical shock to the user and/or damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order
5�
not to obstruct heat radiation. If the temperature inside this unit rises, it
may cause fire, damage to this unit, and/or personal injury.
Do not operate this unit upside-down. They may overheat, possibly causing
6�
damage.
Do not use force on switches, knobs, and/or cords.
7�
When disconnecting the power cable from the wall outlet, grasp the AC
8�
plug; do not pull the cord.
Do not clean this unit with chemical solvents; this might damage the finish.
9�
Use a clean, dry cloth.
Only the voltage specified on this unit must be used. Using this unit with a
10�
higher voltage than specified is dangerous and may cause fire, damage to
this unit, and/or personal injury. Yamaha will not be held responsible for
any damage resulting from use of this unit with a voltage other than that
specified.
Do not attempt to modify or fix this unit. Contact qualified Yamaha service
11�
personnel when any service is needed. The cabinet should never be opened
for any reason.
When not planning to use this unit for long periods of time (i.e. when
12�
going on vacation), disconnect the power cable from the AC wall outlet.
Be sure to read the “TROUBLESHOOTING” section regarding common
13�
operating errors before concluding that the unit is faulty.
Before moving this unit, disconnect the power cable from the wall outlet.
14�
Be sure to use the AC adaptor supplied with this unit. Using an AC adaptor
15�
other than the one provided may cause fire or damage to this unit.
Install this unit near the wall outlet and where the power cable can be
16�
reached easily.
For added protection for this product during a lightning storm, or when it
17�
is left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product due to lightning and
power-line surges.
The batteries shall not be exposed to excessive heat such as sunshine, fire
18�
or the like.
There is a chance that placing this unit too close to a CRT-based (Braun
tube) TV set might impair picture color. Should this happen, move this unit
away from the TV set.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
Even if an iPhone or iPod is not connected to this unit, this unit is not
disconnected from the AC power source as long as it is connected to the
wall outlet. In this state, this unit is designed to consume a very small
quantity of power.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type.
SPECIFICATIONS
Supported iPod .........iPod (5th generation), iPod classic, iPod nano, iPod touch
Supported iPhone ...................................................................iPhone, iPhone 3G
Maximum RMS output power per channel .................................... 15 W + 15 W
(6 Ω 1 kHz, 10% THD)
Power Supply
U.S.A. and Canada models. ................................................AC 120 V, 60 Hz
Other models ..................................................... AC 100 to 240 V, 50/60 Hz
Power Consumption .................................................................................... 10 W
Power Consumption without connecting iPod/iPhone................... less than 1 W
Dimensions (W x D x H) .................................................... 350 x 125 x 109 mm
(13-12/16” x 4-15/16” x 4-5/16”)
Weight (without accessories) .......................................................1.7 kg (3.7 lbs)
iPod (4th generation or before), iPod without Dock connector, iPod photo or
iPod mini are not supported by this unit.
*Specifications are subject to change without notice.
i En
INTRODUCTION
1 2 3
CONTROLS AND FUNCTIONS
English
PDX-30 is a portable player dock designed for iPhone or iPod series. The unit
can be operated by the remote control. Also the iPhone or iPod set into the unit
is automatically charged so you can enjoy playing music as long as you want.
Alphabetical letters below ( , , etc.) can be used for reference to the
illustrations on the separate sheet “Quick Manual” for details.
Supplied accessories
■
Remote control [ ] ...........................................................................................1
AC adaptor [ ] ................................................................................................. 1
(DC 15V, 2.66A, model number: NU40-2150266-I3)
Power cable [ ] ................................................................................................ 1
Owner’s Manual (this manual) ...........................................................................1
Quick Manual ..................................................................................................... 1
Copyright and logo marks
■
iPhone™, iPod
“iPhone” and “iPod” are
trademarks of Apple Inc.,
registered in the U.S. and
other countries.
™
REPLACING THE BATTERY
IN THE REMOTE CONTROL
Dock terminal [ ]
Connects the iPhone or iPod series. When the iPhone or iPod is connected, its
battery will be charged. When the iPhone or iPod is disconnected, the unit will be
in standby mode. The iPhone or iPod can be connected (or disconnected) anytime.
/ (Volume keys) [ ]
Adjusts the volume level.
Status indicator (LED) [ ]
Indicates the current status of the unit.
LED status The current status of this unit
Off The unit is in standby mode. An iPhone
Flashes green Connecting, please wait.
Flashes green once Adjusting the volume level with the
Lights up green
Lights up green and flashes
red
Flashes red The protection circuitry has been activated.
Flashes red once The volume of this unit is set to maximum
or iPod is not connected, or has stopped
playing. (However, lights up for 30 seconds
after connecting or stopping playback.)
volume keys on the unit or operating with
the remote control.
The unit turns on. An iPhone or iPod is
connected.
Flashes red for 2 seconds: An unsupported
iPod is connected.
Keeps flashing red: Connection failed.
(Connect again.)
(Disconnect the AC adaptor and wait for
a while.)
or minimum.
DC IN 15V jack [ ]
Connect the AC adaptor to this jack to supply power. When the AC adaptor is
connected, the unit will be in standby mode, consuming a small quantity of
electricity. When an iPhone or iPod is connected to the unit in standby mode,
the unit turns on. When the iPhone or iPod is disconnected, the unit returns to
standby mode.
TROUBLESHOOTING
Refer to the table below if the unit does not function properly. If the problem you are experiencing is not listed below, or if the instruction below does not help, turn
off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
Problem Cause Remedy
No sound
Cannot change the volume of this unit by
changing the volume of the iPhone or iPod.
The iPhone or iPod display does not change
by pressing the remote control volume keys.
The unit cannot be operated by the remote
control.
The iPhone or iPod is not connected firmly. Connect the iPhone or iPod firmly.
The iPhone or iPod software version has not been
updated.
The power of the unit is off. Connect the AC adaptor correctly.
The volume is turned down. Turn up the volume.
The protection circuitry has been activated by
excessive volume.
The iPhone or iPod being used is not supported by
this unit, or the iPhone or iPod is not connected
firmly.
Download the latest iTunes software to update the
iPhone or iPod firmware version to the latest.
Turn down the volume.
Use the supported iPhone or iPod.
Connect the iPhone or iPod firmly.
1 En
Loading...