Logo and trademarks .......................................................... 11
Information about free software ........................................ 12
■ About this manual
This manual is printed prior to production. Design and specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and product, the product has priority.
This manual explains safety precautions and specifications of your products.
Complete description of MusicCAST2 products is available on the following website.
To access the MusicCAST2 website, please enter the following URL on your browser.
MusicCAST2 website:
www.yamaha.com/musiccast
2
Safety instructions
1 IMPORTANT NOTICE
NOT MODIFY
C
THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly
approved by Yamaha may void your authority,
granted by the FCC, to use the product.
2 IMPORTANT : When connecting this product
to accessories and/or another product use only
high quality shielded cables. Cable/s supplied
with this product MUST be used. Follow all
installation instructions. Failure to follow
instructions could void your FCC authorization
to use this product in the USA.
3 NOTE : This product has been tested and found
to comply with the requirements listed in FCC
Regulations, Part 15 for Class “B” digital
devices. Compliance with these requirements
provides a reasonable level of assurance that
your use of this product in a residential
environment will not result in harmful
interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
FCC INFORMATION (for US customers)
: DO
ompliance with FCC regulations does not
guarantee that interference will not occur in all
installations. If this product is found to be the
source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to
eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is
being affected by the interference.
Utilize power outlets that are on different branch
(circuit breaker or fuse) circuits or install AC line
filter/s.
In the case of radio or TV interference, relocate/
reorient the antenna. If the antenna lead-in is 300
ohm ribbon lead, change the lead-in to coaxial type
cable. If these corrective measures do not produce
satisfactory results, please contact the local retailer
authorized to distribute this type of product. If you
can not locate the appropriate retailer, please
contact Yamaha Electronics Corp., U.S.A. 6660
Orangethorpe Ave, Buena Park, CA 90620.
The above statements apply ONLY to those
products distributed by Yamaha Corporation of
America or its subsidiaries.
This device complies with Part 15 of FCC Rules and
RSS-Gen of IC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference,
and
2) this device must accept any interference received
including interference that may cause undesired
operation.
See user manual instructions if interference to radio
reception is suspected.
3
FCC WARNING
Change or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
(MCX-A300/MCX-P200 only)
This equipment compiles with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without
maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at
least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and
ankles).
(MCX-RC100 only)
The available scientific evidence does not show that any health problems are associated with using low power
wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power
Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not
produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not
found any biological effects. Some studies have suggested that some biological effects might occur, but such
findings have not been confirmed by additional research. MCX-RC100 has been tested and found to comply with
FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
This symbol mark is according to the EU directive 2002/96/EC.This symbol mark means that
electrical and electronic equipment, at their end-of-life, should be disposed of separately from your
household waste. Please act according to your local rules and do not dispose of your old products
with your normal household waste.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
4
■ Precautions
Read this before using this unit.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
1 Install this unit in a cool, dry, clean place away from
direct sunlight, heat sources, and sources of
excessive vibration, dust, moisture, and/or cold. (Do
not use/keep this unit in a car etc.)
2 Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
3 Do not expose this unit to sudden temperature
changes from cold to hot, and do not locate this unit
in an environment with high humidity (i.e. a room
with a humidifier) to prevent condensation inside this
unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
4 Do not clean this unit with chemical solvents; this
might damage the finish. Use a clean, dry cloth.
5 Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any
service is needed. The cabinet should never be
opened for any reason.
6 Be sure to read the “Troubleshooting” section
(online manual) regarding common operating errors
before concluding that the unit is faulty.
7 Before moving this unit, disconnect all AC plugs
from the wall outlets.
8 Be sure to use the AC adapters supplied with this
unit. Using an AC adapter other than those provided
may cause fire or damage to this unit.
9 Install this unit near the wall outlet and where the AC
plugs can be reached easily.
10 For added protection for this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the product
due to lightning and power-line surges.
■ Notes on the internal battery
• Do not attempt to replace the internal battery by
yourself. If you need a battery change, please
contact the nearest authorized Yamaha dealer or
service center.
• Danger of explosion may occur if battery/device is
incorrectly replaced. Replace only with the same or
equivalent type battery recommended by the
manufacturer.
• Do not dispose of batteries/device in a fire. They
may explode. Check with local authorities for
disposal instructions.
• Do not use or leave the battery pack/device near a
heat source. Heat can melt the insulation and damage
other safety features, possibly leading it to leak acid,
overheat, emit smoke, burst and/or ignite.
• Do not immerse the battery pack/device in water or
allow it to get wet. Its protective features can be
damaged. Abnormal chemical reactions may occur,
possibly leading it to leak acid, overheat, emit
smoke, burst and/or ignite.
• Do not crush, disassemble, puncture, or incinerate
the short external contacts of a battery pack/device.
• Do not connect the positive (+) and negative (-)
terminals with a metal object such as wire. Shortcircuiting may occur leading the battery pack/device
to leak acid, overheat, emit smoke, burst and/or
ignite.
The user shall not reverse engineer, decompile, alter, translate or disassemble the software used in this unit,
whether in part or in whole. For corporate users, employees of the corporation itself as well as its business partners
shall observe the contractual bans stipulated within this clause. If the stipulations of this clause and this contract
cannot be observed, the user shall immediately discontinue using the software.
If there should be color blotching or noise when used near a TV, move this unit away from the TV when using it.
Do not use this unit within 22 cm (9 inches) of persons with a heart pacemaker implant or defibrillator implant.
This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit
itself is turned off. In this state, this unit is designed to consume a very small quantity of power.
5
Overview
Yamaha MusicCAST2 system enables you to enjoy listening to music contents stored on your music servers or Internet
radio programs anywhere in the home. In addition, with the Music Commander, you can control the playback of
devices (USB storage device, iPod, etc) connected to your Network Music Player, network receiver (such as RXV3900) and other DLNA products.
PC (Music server)
MCX-A300
(Music Player with amplifier)
WIRELESSLAN
MCX-RC100 (Music Commander)
ZONE
MUSIC/
REMOTE
BACK HOME
VOLUME
MUTE
NETWORKMUSICCOMMANDERMCX-RC100
WAN
(vTuner, etc)
(Music Player without amplifier)
MCX-P200
WIRELESSLAN
PURE DIRECT
VOLUME
STEREO/
SEARCH
AUDIO TONE
INFO
CATEGORYPRESET/TUNING/CH MONO
MODE
MEMORY
CONTROLSELECT
ENTER
BAND
INPUT
ZONE ON/OFF
ZONE CONTROLS
STRAIGHT
MAIN ZONE
MULTI ZONE
ZONE 2
ZONE 3
EFFECT
RL
OPTICAL
AUDIO
SILENT CINEMA S VIDEO VIDEO
YPAO
ON/OFF
PROGRAM
OPTIMIZER
MIC
VIDEO AUX
PHONES
ON
OFF
MASTER
Receiver
(RX-V1900, etc)
■ Checking the package contents
MCX-RC100 (Network Music Commander)
Main unit x 1
Cradle (MCX-RC100BC) x 1
AC adapter x 1
Owner's Manual (this manual) x 1
Getting Started x 1
TwonkyMedia Server License Key x 1
Warranty card x 1
WiFi router
PURE DIRECT
Other DLNA products
VOLUME
STEREO/
SEARCH
AUDIO SELECT/
TONE
CATEGORYPRESET/TUNING/CH MONO
MODE
MEMORY
MENUREC OUT
CONTROL
ENTER
INFO
BAND
INPUT
ZONE ON/OFF
ZONE CONTROLS
STRAIGHT
MAIN ZONE
MULTI ZONE
ZONE 2
ZONE 3
EFFECT
RL
OPTICAL
AUDIO
SILENT CINEMA S VIDEO VIDEO
YPAO
ON/OFF
PROGRAM
OPTIMIZER
MIC
PHONES
USB
VIDEO AUX
ON
OFF
MASTER
Network receiver
(RX-V3900, etc)
(TV, etc)
Wired
WiFi
Wired or WiFi
MCX-A300/MCX-P200 (Network Music Player)
Main unit x 1
AC adapter x 1
Power cable x 1
IR flasher x 2 (MCX-P200 only)
Owner's Manual (this manual) x 1
Getting Started x 1
Warranty card x 1
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.