Yamaha LNR125 Owner's Manual
DIC183
LNR125
OWNER’S MANUAL
Read this manual carefully before operating this vehicle.
B21-F8199-E2
[English (E)]
EAU46094
Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Introduction
EAU10114
Welcome to the Yamaha world of motorcycling!
As the owner of the LNR125, you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of your LNR125. The Owner’s Manual
does not only instruct you in how to operate, inspect and maintain your scooter, but also in how to safeguard yourself and
others from trouble and injury.
In addition, the many tips given in this manual will help keep your scooter in the best possible condition. If you have any
further questions, do not hesitate to contact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first!
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your scooter and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.
WARNING
EWA12412
Please read this manual carefully and completely before operating this scooter.
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Important manual information
EAU10134
Particularly important information is distinguished in this manual by the following notations:
*Product and specifications are subject to change without notice.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
A WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
A NOTICE indicates special precautions that must be taken to avoid damage to the
vehicle or other property.
A TIP provides key information to make procedures easier or clearer.
WARNING
NOTICE
TIP
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Important manual information
EAUN0430
LNR125
OWNER’S MANUAL
©2017 PT Yamaha Indonesia Motor
Manufacturing
1st edition, July 2017
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
PT Yamaha Indonesia Motor Manufac-
turing
is expressly prohibited.
Printed in Indonesia.
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Table of contents
Location of important labels ........... 1-1
Safety information............................ 2-1
Further safe-riding points............... 2-5
Helmets .......................................... 2-6
Description ....................................... 3-1
Left view ......................................... 3-1
Right view....................................... 3-2
Controls and instruments............... 3-3
Instrument and control functions... 4-1
Remote control unit ....................... 4-1
Main switch/steering lock............... 4-3
Keyhole shutter .............................. 4-4
Indicator lights and warning light ... 4-5
Speedometer unit........................... 4-6
Handlebar switches........................ 4-6
Front brake lever ............................ 4-7
Rear brake lever ............................. 4-7
Rear brake lever lock...................... 4-7
Fuel tank cap.................................. 4-8
Fuel................................................. 4-9
Catalytic converter ....................... 4-10
Kickstarter .................................... 4-11
Seat .............................................. 4-11
Helmet holders ............................. 4-12
Convenience hook........................ 4-12
Storage compartment .................. 4-13
Sidestand ..................................... 4-13
Ignition circuit cut-off system....... 4-14
For your safety – pre-operation
checks ...............................................5-1
Operation and important riding
points .................................................6-1
Starting the engine..........................6-1
Acceleration and deceleration ........6-2
Braking............................................6-2
Engine break-in...............................6-3
Parking............................................6-3
Periodic maintenance and
adjustment ........................................7-1
Owner’s tool kit...............................7-1
Periodic maintenance chart for the
emission control system..............7-2
General maintenance and
lubrication chart...........................7-3
Removing and installing the
cowling and panels......................7-8
Checking the spark plug.................7-9
Engine oil and oil strainer..............7-11
Final transmission oil.....................7-13
Air filter and V-belt case air filter
elements ....................................7-14
Checking the engine idling
speed.........................................7-16
Adjusting the throttle grip
free play.....................................7-16
Valve clearance.............................7-17
Tires ..............................................7-17
Cast wheels .................................. 7-19
Checking the brake lever
free play..................................... 7-19
Adjusting the rear brake lever
free play..................................... 7-19
Checking the front brake pads
and rear brake shoes ............... 7-20
Checking the brake fluid level ...... 7-21
Changing the brake fluid ............. 7-21
Checking the V-belt...................... 7-22
Checking and lubricating the
cables........................................ 7-22
Checking and lubricating the
throttle grip and cable............... 7-22
Lubricating the front and rear
brake levers............................... 7-23
Checking and lubricating the
centerstand and sidestand........ 7-23
Checking the front fork................. 7-24
Checking the steering................... 7-25
Checking the wheel bearings ....... 7-25
Battery .......................................... 7-25
Replacing the fuse........................ 7-27
Headlight ...................................... 7-27
Replacing an auxiliary light bulb... 7-28
Replacing a front turn signal
light bulb.................................... 7-28
Replacing a tail/brake light bulb
or a rear turn signal light bulb ... 7-28
Troubleshooting............................ 7-29
Troubleshooting chart .................. 7-31
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Table of contents
Scooter care and storage ................8-1
Care.................................................8-1
Storage............................................8-3
Specifications....................................9-1
Consumer information ...................10-1
Identification numbers...................10-1
Vehicle data recording ..................10-2
Index ................................................11-1
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Location of important labels
1-1
1
EAU10385
Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of
your vehicle. Never remove any labels from your vehicle. If a label becomes difficult to read or comes off, a replacement
label is available from your Yamaha dealer.
231
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Location of important labels
1-2
1
1WD-F1668-01
200, 29
200, 29
225, 33
225, 33
100kPa=1bar kPa, psi kPa, psi
1
3
2
กรุณาอานคูมือผูใช
รถจักรยานยนตอยางละเอียด
กอนการใชงานรถจักรยานยนต
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
2-1
2
Safety information
EAU67760
Be a Responsible Owner
As the vehicle’s owner, you are responsible for the safe and proper operation of your motorcycle.
Motorcycles are single-track vehicles.
Their safe use and operation are dependent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements before riding this motorcycle.
He or she should:
Obtain thorough instructions from
a competent source on all aspects
of motorcycle operation.
Observe the warnings and mainte-
nance requirements in this Owner’s Manual.
Obtain qualified training in safe
and proper riding techniques.
Obtain professional technical ser-
vice as indicated in this Owner’s
Manual and/or when made necessary by mechanical conditions.
Never operate a motorcycle with-
out proper training or instruction.
Take a training course. Beginners
should receive training from a certified instructor. Contact an authorized motorcycle dealer to find out
about the training courses nearest
you.
Safe Riding
Perform the pre-operation checks
each time you use the vehicle to make
sure it is in safe operating condition.
Failure to inspect or maintain the vehicle properly increases the possibility of
an accident or equipment damage.
See page 5-1 for a list of pre-operation
checks.
This motorcycle is designed to
carry the operator and a passenger.
The failure of motorists to detect
and recognize motorcycles in traffic is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been
caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap-
pears to be very effective in reducing the chance of this type of
accident.
Therefore:
• Wear a brightly colored jacket.
• Use extra caution when you are
approaching and passing
through intersections, since intersections are the most likely
places for motorcycle accidents
to occur.
• Ride where other motorists can
see you. Avoid riding in another
motorist’s blind spot.
• Never maintain a motorcycle
without proper knowledge.
Contact an authorized motorcycle dealer to inform you on basic motorcycle maintenance.
Certain maintenance can only
be carried out by certified staff.
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Safety information
2-2
2
Many accidents involve inexperi-
enced operators. In fact, many operators who have been involved in
accidents do not even have a current driver’s license.
• Make sure that you are qualified
and that you only lend your motorcycle to other qualified operators.
• Know your skills and limits.
Staying within your limits may
help you to avoid an accident.
• We recommend that you practice riding your motorcycle
where there is no traffic until you
have become thoroughly familiar with the motorcycle and all of
its controls.
Many accidents have been
caused by error of the motorcycle
operator. A typical error made by
the operator is veering wide on a
turn due to excessive speed or undercornering (insufficient lean angle for the speed).
• Always obey the speed limit and
never travel faster than warranted by road and traffic conditions.
• Always signal before turning or
changing lanes. Make sure that
other motorists can see you.
The posture of the operator and
passenger is important for proper
control.
• The operator should keep both
hands on the handlebar and
both feet on the operator footrests during operation to maintain control of the motorcycle.
• The passenger should always
hold onto the operator, the seat
strap or grab bar, if equipped,
with both hands and keep both
feet on the passenger footrests.
Never carry a passenger unless
he or she can firmly place both
feet on the passenger footrests.
Never ride under the influence of
alcohol or other drugs.
This motorcycle is designed for
on-road use only. It is not suitable
for off-road use.
Protective Apparel
The majority of fatalities from motorcycle accidents are the result of head injuries. The use of a safety helmet is the
single most critical factor in the prevention or reduction of head injuries.
Always wear an approved helmet.
Wear a face shield or goggles.
Wind in your unprotected eyes
could contribute to an impairment
of vision that could delay seeing a
hazard.
The use of a jacket, substantial
shoes, trousers, gloves, etc., is effective in preventing or reducing
abrasions or lacerations.
Never wear loose-fitting clothes,
otherwise they could catch on the
control levers or wheels and cause
injury or an accident.
Always wear protective clothing
that covers your legs, ankles, and
feet. The engine or exhaust system become very hot during or after operation and can cause
burns.
A passenger should also observe
the above precautions.
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Safety information
2-3
2
Avoid Carbon Monoxide Poisoning
All engine exhaust contains carbon
monoxide, a deadly gas. Breathing
carbon monoxide can cause headaches, dizziness, drowsiness, nausea,
confusion, and eventually death.
Carbon Monoxide is a colorless, odorless, tasteless gas which may be
present even if you do not see or smell
any engine exhaust. Deadly levels of
carbon monoxide can collect rapidly
and you can quickly be overcome and
unable to save yourself. Also, deadly
levels of carbon monoxide can linger
for hours or days in enclosed or poorly
ventilated areas. If you experience any
symptoms of carbon monoxide poisoning, leave the area immediately, get
fresh air, and SEEK MEDICAL TREATMENT.
Do not run engine indoors. Even if
you try to ventilate engine exhaust
with fans or open windows and
doors, carbon monoxide can rapidly reach dangerous levels.
Do not run engine in poorly venti-
lated or partially enclosed areas
such as barns, garages, or carports.
Do not run engine outdoors where
engine exhaust can be drawn into
a building through openings such
as windows and doors.
Loading
Adding accessories or cargo to your
motorcycle can adversely affect stability and handling if the weight distribution of the motorcycle is changed. To
avoid the possibility of an accident, use
extreme caution when adding cargo or
accessories to your motorcycle. Use
extra care when riding a motorcycle
that has added cargo or accessories.
Here, along with the information about
accessories below, are some general
guidelines to follow if loading cargo to
your motorcycle:
The total weight of the operator, passenger, accessories and cargo must
not exceed the maximum load limit.
Operation of an overloaded vehicle
could cause an accident.
When loading within this weight limit,
keep the following in mind:
Cargo and accessory weight
should be kept as low and close to
the motorcycle as possible. Securely pack your heaviest items as
close to the center of the vehicle
as possible and make sure to distribute the weight as evenly as
possible on both sides of the motorcycle to minimize imbalance or
instability.
Shifting weights can create a sud-
den imbalance. Make sure that
accessories and cargo are securely attached to the motorcycle
before riding. Check accessory
mounts and cargo restraints frequently.
• Properly adjust the suspension
for your load (suspension-adjustable models only), and
check the condition and pressure of your tires.
• Never attach any large or heavy
items to the handlebar, front
fork, or front fender. Such items
can create unstable handling or
a slow steering response.
Maximum load:
155 kg (342 lb)
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
Safety information
2-4
2
This vehicle is not designed to
pull a trailer or to be attached to
a sidecar.
Genuine Yamaha Accessories
Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are available only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection
to Yamaha manufacture parts and accessories or offer other modifications
for Yamaha vehicles. Yamaha is not in
a position to test the products that
these aftermarket companies produce.
Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or
modifications not specifically recommended by Yamaha, even if sold and
installed by a Yamaha dealer.
Aftermarket Parts, Accessories, and
Modifications
While you may find aftermarket products similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accessories or modifications are not suitable
because of potential safety hazards to
you or others. Installing aftermarket
products or having other modifications
performed to your vehicle that change
any of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or
death. You are responsible for injuries
related to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Loading” when mounting accessories.
Never install accessories or carry
cargo that would impair the performance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce
ground clearance or cornering
clearance, limit suspension travel,
steering travel or control operation, or obscure lights or reflectors.
• Accessories fitted to the handlebar or the front fork area can
create instability due to improper weight distribution or aerody-
namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.
• Bulky or large accessories may
seriously affect the stability of
the motorcycle due to aerodynamic effects. Wind may attempt to lift the motorcycle, or
the motorcycle may become
unstable in cross winds. These
accessories may also cause instability when passing or being
passed by large vehicles.
• Certain accessories can displace the operator from his or
her normal riding position. This
improper position limits the
freedom of movement of the
operator and may limit control
ability, therefore, such accessories are not recommended.
Use caution when adding electri-
cal accessories. If electrical accessories exceed the capacity of
the motorcycle’s electrical system, an electric failure could re-
UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM
Safety information
2-5
2
sult, which could cause a
dangerous loss of lights or engine
power.
Aftermarket Tires and Rims
The tires and rims that came with your
motorcycle were designed to match
the performance capabilities and to
provide the best combination of handling, braking, and comfort. Other
tires, rims, sizes, and combinations
may not be appropriate. Refer to page
7-17 for tire specifications and more information on replacing your tires.
Transporting the Motorcycle
Be sure to observe following instructions before transporting the motorcycle in another vehicle.
Remove all loose items from the
motorcycle.
Point the front wheel straight
ahead on the trailer or in the truck
bed, and choke it in a rail to prevent movement.
Secure the motorcycle with tie-
downs or suitable straps that are
attached to solid parts of the motorcycle, such as the frame or up-
per front fork triple clamp (and not,
for example, to rubber-mounted
handlebars or turn signals, or
parts that could break). Choose
the location for the straps carefully
so the straps will not rub against
painted surfaces during transport.
The suspension should be com-
pressed somewhat by the tiedowns, if possible, so that the motorcycle will not bounce excessively during transport.
EAU57610
Further safe-riding points
Be sure to signal clearly when
making turns.
Braking can be extremely difficult
on a wet road. Avoid hard braking,
because the motorcycle could
slide. Apply the brakes slowly
when stopping on a wet surface.
Slow down as you approach a
corner or turn. Once you have
completed a turn, accelerate
slowly.
Be careful when passing parked
cars. A driver might not see you
and open a door in your path.
Railroad crossings, streetcar rails,
iron plates on road construction
sites, and manhole covers become extremely slippery when
wet. Slow down and cross them
with caution. Keep the motorcycle
upright, otherwise it could slide
out from under you.
The brake pads or linings could
get wet when you wash the motorcycle. After washing the motorcycle, check the brakes before
riding.
UB21E2E0.book Page 5 Wednesday, July 19, 2017 3:56 PM
Safety information
2-6
2
Always wear a helmet, gloves,
trousers (tapered around the cuff
and ankle so they do not flap), and
a brightly colored jacket.
Do not carry too much luggage on
the motorcycle. An overloaded
motorcycle is unstable. Use a
strong cord to secure any luggage
to the carrier (if equipped). A loose
load will affect the stability of the
motorcycle and could divert your
attention from the road. (See page
2-3.)
EAUU0033
Helmets
Operating this vehicle without an approved motorcycle helmet increases
your chances of a severe head injury or
death in the event of an accident. The
majority of fatalities from motorcycle or
scooter accidents are the result of
head injuries. The use of a safety helmet is the single most critical factor in
the prevention or reduction of head injuries.
Always select an approved motorcycle helmet
Pay attention to the following when
choosing a motorcycle helmet.
The helmet must meet the safety
standard “TIS”.
The helmet size must match the
size of the rider’s head.
Never subject a helmet to heavy
shocks.
Wearing the helmet correctly
Always connect the chin strap. In the
case of an accident, the helmet has a
much less chance of coming off if the
chin strap is connected.
Correct usage
Wrong usage
Types of helmets and their usage
Half-type: use only for riding at low
speeds
ZAUU0003
ZAUU0007
UB21E2E0.book Page 6 Wednesday, July 19, 2017 3:56 PM
Safety information
2-7
2
Full-type: use only for riding at low
to mid-range speeds
Full-face-type: use for riding at
mid-range to high speeds
ZAUU0004
ZAUU0005
ZAUU0006
UB21E2E0.book Page 7 Wednesday, July 19, 2017 3:56 PM
Description
3-1
3
EAU10411
Left view
123 4 7
8
91011121314
56
1. Front turn signal light (page 7-28)
2. Auxiliary light (page 7-28)
3. Headlight (page 7-27)
4. Battery (page 7-25)
5. Fuse (page 7-27)
6. Convenience hook (page 4-12)
7. Owner’s tool kit (page 7-1)
8. Air filter element (page 7-14)
9. Final transmission oil drain bolt (page 7-13)
10.Kickstarter (page 4-11)
11.Engine oil drain bolt B (page 7-11)
12.Engine oil drain bolt A (page 7-11)
13.Sidestand (page 4-13)
14.V-belt case air filter element (page 7-14)
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Description
3-2
3
EAU10421
Right view
23
7
45 61
1. Rear turn signal light (page 7-28)
2. Tail/brake light (page 7-28)
3. Fuel tank cap (page 4-8)
4. Storage compartment (page 4-13)
5. Main switch/steering lock (page 4-3)
6. Front brake fluid reservoir (page 7-21)
7. Dipstick (page 7-11)
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Description
3-3
3
EAU10431
Controls and instruments
12 3 4 5
6
1. Rear brake lever (page 4-7)
2. Left handlebar switches (page 4-6)
3. Speedometer (page 4-6)
4. Right handlebar switch (page 4-6)
5. Front brake lever (page 4-7)
6. Main switch/steering lock (page 4-3)
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
Instrument and control functions
4-1
4
EAU61024
Remote control unit
This vehicle is equipped with a main
key that also functions as a remote
control. The remote control unit can
help you find the location of your
parked vehicle and can open the keyhole shutter automatically as well. The
remote control unit operations are described below.
To find the location of your parked
vehicle
Press the remote control button on the
main key to flash the turn signal lights
twice and sound the electronic alert
twice.
To open the keyhole shutter
Press the remote control button for at
least one second to flash the turn signal lights once, sound the electronic
alert once, and open the keyhole shutter.
TIP
The keyhole light will come on and
then go out after about 30 seconds. If the battery voltage is low,
the keyhole light will flash for 30
seconds.
If the main key is not used in nine
days, the remote operation functions are automatically canceled
to reduce load on the battery.
When the main switch is turned to
“ON” again, function is restored.
Holding the remote control im-
properly or other obstructions can
reduce the effective range.
NOTICE
ECA20960
The main key contains a battery and
electronic circuits. Handle it carefully. Therefore:
Do not drop the main key or
subject it to strong impacts.
Do not submerge it in water or
other liquids.
Do not place heavy items or ex-
cessive stress on the main key.
Do not expose it to excessively
high temperatures.
Do not grind any key or alter its
shape.
To replace the key battery
1. Remove the screw.
1. Main key (remote control)
2. Remote control button
3. Shutter key
4. Spare key
4
2
1
3
1. Screw
1
UB21E2E0.book Page 1 Wednesday, July 19, 2017 3:56 PM
Instrument and control functions
4-2
4
2. Remove the key cover, and then
remove the remote control unit
from the main key.
3. Remove the key battery.
4. Install a new key battery. NOTICE:
Make sure that the positive (+)
and negative (-) sides of the battery are facing in the correct di-
rections.
[ECA21240]
5. Install the remote control unit into
the main key, and then install the
key cover as shown.
6. Install the screw.
1. Key cover
1. Remote control unit
1
1
1. Key battery
Specified battery:
CR1632
1
UB21E2E0.book Page 2 Wednesday, July 19, 2017 3:56 PM
Instrument and control functions
4-3
4
EAU68550
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, is
used to lock the steering, and is used
to open the seat. The main switch positions are described below.
TIP
The main switch is equipped with a
keyhole shutter. See page 4-4 for instructions on how to open and shut the
keyhole shutter.
EAUU1055
ON
All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.
TIP
The meter lighting comes on when the
key is turned to “ON”. When the engine
is started, the headlight, auxiliary light
and taillight come on automatically,
and will stay on until the key is turned
to “OFF” or the sidestand is lowered.
EAU10662
OFF
All electrical systems are off. The key
can be removed.
WARNING
EWA10062
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
EAU1068B
LOCK
The steering is locked and all electrical
systems are off. The key can be removed.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. With the key in the “OFF” position,
push the key in and turn it to
“LOCK”.
3. Remove the key.
TIP
If the steering will not lock, try turning
the handlebars back to the right slightly.
HANDLE
LOCK
OPEN
SHUT
IGNITION
ZAUU1022
1. Push.
2. Turn.
SHUT
OFF
ON
IGNITION
OFF (Push/Turn)
LOCK
ZAUU1025
UB21E2E0.book Page 3 Wednesday, July 19, 2017 3:56 PM
Instrument and control functions
4-4
4
To unlock the steering
From the “LOCK” position, push the
key in and turn it to “OFF”.
EAU61011
Keyhole shutter
To open the keyhole shutter
Use the remote control unit (See page
4-1.) or insert the keyhole shutter key
into the keyhole shutter receptacle as
shown, and then turn the key to
“OPEN” to open the keyhole shutter.
To close the keyhole shutter
Push the “SHUT” lever inward to close
the keyhole shutter.
HANDLE
LOCK
OPEN
GNITION
OFF
LOCK
(Push/Turn)
ZAUU1026
SHUT
IGN
ITIO
N
HANDLE
LOCK
OPEN
ZAUU0986
UB21E2E0.book Page 4 Wednesday, July 19, 2017 3:56 PM
Instrument and control functions
4-5
4
EAU1100D
Indicator lights and warning
light
EAU11032
Turn signal indicator lights “ ”
and “”
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
EAU11081
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11486
Engine trouble warning light “ ”
This warning light comes on if a problem is detected in the electrical circuit
monitoring the engine. If this occurs,
have a Yamaha dealer check the vehicle.
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
EAUN0711
Eco indicator light “ECO”
This indicator light comes on when the
vehicle is being operated in an environmentally friendly, fuel-efficient manner.
The indicator light goes off when the
vehicle is stopped.
TIP
Consider the following tips to reduce
fuel consumption:
Avoid high engine speeds during
acceleration.
Travel at a constant speed.
1. Engine trouble warning light “ ”
2. High beam indicator light “ ”
3. Left turn signal indicator light “ ”
4. Right turn signal indicator light “ ”
5. Eco indicator “ECO”
45
123
UB21E2E0.book Page 5 Wednesday, July 19, 2017 3:56 PM
Loading...