H11 Version 1.10
New Functions
For USB Wireless LAN adapter Users
Yamaha has updated the firmware of the H11 from Version 1.00 to Version 1.10. This
version provides an additional, push-button method for WPS setup for making
Internet settings, and WPA and WPA2 security formats.
Please refer to the chapter “Internet Direct Connection” on page 33 in your owner’s
manual, along with this manual.
NOTE
For details on how to check the version for the instrument you are using, refer to the chapter “Checking the version
number” on page 16 in your owner’s manual.
NOTE
For details on how to update, visit the following URL:
http://services.music.yamaha.com/radio/connect.html
Added method for making Internet Settings
Since a push-button method for WPS setup has been added, wireless network
settings can easily be made.
Enhanced security
The instrument now includes settings for the robust WPA and WPA2 security formats
(types listed below), which are stronger than those conventionally adopted for WEP.
WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES)
NOTE
Concerning the WPA and WPA2 security formats, if you are not using the push-button method for WPS setup, visit the
following URL:
http://services.music.yamaha.com/radio/connect.html
NOTE
Some USB Wireless LAN adaptors do not support the push-button method for WPS setup, or the WPA and WPA2 security
formats. For a list of USB Wireless LAN adaptors whose compatibility have been confirmed by Yamaha, visit the Yamaha
website:
http://download.yamaha.com/
NOTE
To configure the setting for the Wireless LAN using the push-button method for WPS setup, the access point must support
that method. For details about checking or changing the settings of the access point, refer to the owner’s manual of the
access point (the Wireless LAN router) you are using.
NOTE
The H11 does not support the PIN method.
H11 Version 1.10 New Functions
EN
1
Setting the push-button method for WPS
NOTE
For details on making connections,
visit the following URL:
http://services.music.yamaha.com/
radio/connect.html
NOTE
If you engage the Load mode when
the instrument is online, the
instrument switches to offline
connection status.
NOTE
If you engage the load mode, BGM
mode will be turned off.
NOTE
If you want to cancel the operation,
press any button (other than the
[PLAY] button or the [+/YES]/[-/NO]
buttons.).
NOTE
You can not engage the load mode
during BGM playback.
setup
Operation
If the access point (the Wireless LAN router) you are using is compatible with the pushbutton method for WPS setup, the settings for the wireless network can be automatically
made.
1 Connect a USB Wireless LAN adapter to a USB terminal on
the instrument.
2 Hold down the [BGM] button and press the [+/YES] button
then, engage the Load mode.
The indication “Lod” appears in the display.
3 Press the [+/YES] button or the [-/NO] button, then engage
the push-button method for WPS setup.
The indication “SEt” appears in the display.
H11 Version 1.10 New Functions
2
Loading...