Yamaha CLP-611, CLP-811 User Manual

IMPORTANT

Check your power supply

Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a “minus” screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.

WICHTIG

Überprüfung der Stromversorgung

Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist

IMPORTANT

Contrôler la source d’alimentation

Vérifiez que la tension spécifiée sur le panneau arrière correspond à la tension du secteur. Dans certaines régions, l’instrument peut être équipé d’un sélecteur de tension situé sur le panneau inférieur du clavier à proximité du cordon d’alimentation. Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le sélecteur de tension est réglé sur 240 V au départ d’usine. Pour modifier ce réglage, utilisez un tournevis à lame plate pour tourner le sélecteur afin de mettre l’indication correspondant à la tension de votre région vis à vis du repère triangulaire situé sur le panneau.

IMPORTANTE

Verifique la alimentación de corriente

Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión especificada en la placa de características del panel inferior de la unidad del teclado principal, cerca del cable de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el ajuste, emplee un destornillador de cabeza “recta” para girar el selector de modo que aparezca la tensión correcta al lado del indicador del panel.

SPECIAL MESSAGE SECTION

PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

See bottom of Keyboard enclosure for graphic symbol markings

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:

Battery Notice: This product MAY contain a small nonrechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement.

Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you.

Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc.

The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.

IMPORTANT NOTICE: All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/has been modified. Implied warranties may also be affected.

SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.

NOTICE: Service charges incurred due to lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service.

NAME PLATE LOCATION: The graphic below indicates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.

CLP-611 CLP-811

92-469 1

Model _____________________________________ Serial No. __________________________________ Purchase Date ______________________________

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

CLP-811 CLP-611



Owner’s Manual English Bedienungsanleitung Deutsch Mode d’emploi Français Manual de instrucciones Español

Introduction

Thank you for choosing a Yamaha CLP-811/611 Clavinova. Your Clavinova is a fine musical instrument employing advanced Yamaha music technology. With proper care, your Clavinova will provide you with many years of musical pleasure.

● Yamaha’s AWM (Advanced Wave Memory) sound generation provides extremely rich, realistic voices. Piano voices are especially true and powerful.

● The damper pedal produces natural piano resonances, obtained from direct sampling of string and soundboard resonance characteristics.

● Piano-like touch response offers great control and playability. Responsiveness can be set to any of four levels.

● Dual mode lets you play any two voices in unison.

● Split mode divides the keyboard into two zones, so

that you can play a different voice with each hand.

● Special Organ Combination voice can be freely edited.

● Unique Clavinova T one voice provides a new and versatile sound.

To ensure that you can take full advantage of your Clavinova’s many outstanding features, please read through this manual carefully, and store in a safe place for future reference.

● Built-in metronome function facilitates effective practice.

● Digital recording function can record and replay your keyboard input (up to about 4,200 notes).

● With MIDI compatibility and a solid range of MIDI functions, the Clavinova can serve well within a wide variety of advanced MIDI setups.

● Built-in computer interface allows for direct connection to personal computers running advanced music software.

● Large LCD provides an effective and friendly interface. Well-designed displays make setup and control operations extremely easy.

Taking Care Of Your Clavinova

Your Clavinova is a fine musical instrument, and deserves the most careful treatment. Observe the following points and your Clavinova will sound and look great for many years.

1 Never open the case and touch or tamper with

the internal circuitry.

2 Always turn the POWER switch OFF after use,

and close the key cover to protect the keyboard.

3 Clean the cabinet and keys of your Clavinova

only with a clean, slightly damp cloth. A neutral cleanser may be used if desired. Never use abrasive cleansers, waxes, solvents, or chemical dust cloths as these can dull or damage the finish.

4 Never place any vinyl products on your

Clavinova. Contact with vinyl can cause irreversible damage to the finish.

5 Install your Clavinova in a place that is away

from direct sunlight, excessive humidity and heat.

6 Never apply excessive force to the controls,

connectors or other parts of your Clavinova, and avoid scratching or bumping it with hard objects.

7 Make sure that your local AC voltage matches

the voltage specified on the Clavinova’s nameplate (located on the bottom panel, under the keyboard). Note that some Clavino vas are equipped with a voltage selector dial located next to the power-cord inlet. If your unit includes a selector, turn it as necessary (with a screwdriver) to select the correct voltage.

● Nameplate Location

The CLP-811/611 nameplate is located on the bottom panel.

Contents

Getting Ready ........................................................2

Music Stand .....................................................2

Key Cover.........................................................2

Powering Up ....................................................3

Adjusting the Volume ..................................... 3

Using Headphones......................................... 3

Panel Controls and Connectors............................... 4

Basic Controls and Functions .................................. 6

Controlling the Clavinova .............................. 6

Frequently Used Buttons............................... 6

Playing the Demos and Piano Songs ...................... 8

Playing the Demos ......................................... 9

Playing the Piano Songs.............................. 10

One-Hand Practice with Piano Songs ........ 11

Repetition Practice with Piano Songs ........ 12

Selecting and Playing Voices................................ 13

Selecting a Voice .......................................... 13

Using the Pedals .......................................... 14

Changing the Sound [VARIATION],

[BRILLIANCE], [REVERB], [EFFECT].......... 14

TOUCH............................................................16

TRANSPOSE ..................................................17

DUAL Mode (Mixing two voices together) .. 17

SPLIT Mode (Dividing the keyboard) .......... 18

Using the METRONOME .............................. 19

F6. OrganEdit (ORGAN

COMBINATION settings)................... 30

F7. Metronome (Metronome settings) ..... 32

F8. Display (Display mode) ..................... 32

F9. L.Pedal (Function of left pedal) ......... 33

F10. DamperDpt (Damper-pedal depth).... 33

F11. Damper (Number of

damper-pedal levels)......................... 34

F12. CancelVol (Volume of muted

piano-song track) .............................. 34

F13. MIDIFunc. (MIDI settings) ................. 34

CLP-811

F14. MicRevDpt (Microphone reverb

depth).................................................36

F15. Backup (Backup ON/OFF

settings) .............................................36

CLP-611

F14. Backup (Backup ON/OFF

settings) .............................................36

The Clavinova’s Device Connectors ...................... 38

Connecting to a Personal Computer .......... 40

Troubleshooting ....................................................42

Options ................................................................43

Index....................................................................44

Using the Recorder ...............................................20

Recording.......................................................20

Playback.........................................................22

Configuration Functions (FUNCTION mode) .......... 24

Basic Procedure ............................................26

Function descriptions.................................. 27

F1. Tune (Keyboard fine tuning) .............. 27

F2. KTune (Key-by-key fine tuning).......... 27

F3. Scale (Temperament selection)......... 28

F4. DualFunc. (Settings for

DUAL mode.)..................................... 29

F5. SplitFunc. (Settings for SPLIT

mode.)................................................29

• Within this manual, a white arrow ( ) indicates how the Clavinova responds to an action that you have taken.

• All front panel illustrations are from the CLP-811.

• Screen illustrations show examples only. Actual screen content will vary according to operational settings.

Demo and Piano Songs Lists ................................ 46

Factory Defaults ...................................................47

MIDI Data Format ................................................48

Specifications........................................................53

CLP-811 Assembly Procedure .............................. 54

CLP-611 Assembly Procedure .............................. 60

MIDI Implementation Chart ................................. 66

Getting Ready

Music Stand

CLP-811

To raise the stand:

1. Using two hands, take hold of the left and right sides of the music stand. Lift the stand upwards while at the same time rotating the top of the stand toward you.

2. Push the stand down into place so that the opening on the base of the stand fits onto the small notch on the plastic hook.

To retract the stand:

Lift the stand straight up off the notch, then rotate it backwards and return it to its original position.

CLP-611

To raise the stand:

1. Lift the stand forward as far as it will go.

2. Flip down the two metal supports at the bottom rear of the stand.

3. Lower the stand downward slightly so that it comes to rest on the metal supports.

To lower the stand:

1. Lean the stand forward as far as it will go.

2. Raise the two metal supports (at the back of the stand) so that they are flush with the stand.

3. Gently lower the stand backward until it is all the way down.

Please do not try to use the stand in half-raised

NOTE

position. When raising or lowering the stand, always hold on to it until it is securely in place.

Key Cover

To open the cover:

1. Lift the cover slightly (not too much).

2. Gently slide the cover open.

To close the cover:

1. Slide the cover all the way forward, holding it firmly so that it can’t drop down.

2. Gently lower the cover over the keys.

Hold the cover with both hands when moving it, and do not release it until it is fully opened or closed. Be careful to avoid catching fingers (your and others’,) between the cover and the main unit.

Be careful of fingers when opening or closing.

CLP-811/611 Getting Ready

Powering Up

1. Connect the power cord.

Insert one end of the power cord into the power connector on the Clavinova, and the other end into a standard wall outlet. (If your unit comes with a plug adaptor and its use is required, please connect it to the end of the cord before plugging in.)

The power inlet is located at rear of Clavinova, on the underside of the main unit (directly above the backboard.)

2. Switch on the power.

The [POWER] button is located to the left of the keyboard. Press it once to switch the power on.

The display comes on, and the power indicator on the front left of the instrument lights up. One or more panel indicators also light up.

POWER

The power indicator is located on the front side, so that you can tell if power is on even with the key cover closed.

ROOM

Power indicator

NORMAL

BRILLIANCE

REVERB EFFECT TOUCH

PHONESMIC.MIC. VOL.

MIN MAX

CLP-811

MEDIUM

To switch the power off, press [POWER] once again.

The display and indicators all go off.

Adjusting the Volume

You adjust the volume by moving the [MASTER VOLUME] slider up or back. Adjust as necessary while

playing on the keyboard.

Using Headphones

You can connect headphones to either or both of the PHONES jacks. The connection automatically cuts off output from the Clavinova’s speakers. Two jacks are provided so that two people can listen at the same time. (Headphones must be purchased separately.)

CLP-611

PHONES

MIN MAX

Louder

Softer

CLP-811

TEMPO

MASTER VOLUME

PHONESMIC.MIC. VOL.

Standard jack for stereo headphones

MAX

MIN

The [MASTER VOLUME] slider also controls the output level to the PHONES and AUX OUT jacks.

Recommended headphones: Yamaha HPE-160

CLP-811/611 Getting Ready

Panel Controls and Connectors

Front Panel

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1 HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

SONG

HARD

MEDIUM

SOFT FIXED

MEASURE

TEMPO

MASTER VOLUME

345 0 A C E

TRANSPOSE SPLIT VARIATION

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

789 D F

PIANO1

PIANO2 CLAVI.TONE E.PIANO 1 E.PIANO 2

VIBES STRINGS CHOIR

HARPSICHORD

PIPE

ORGAN

BASS

ORGAN

COMBINATION

TRANSPOSE

MELLOW

NORMAL BRIGHT

BRILLIANCE

This button exists on the CLP-811 but not on the CLP-611. All other panel buttons are common to both models.

POWER

A-1 B-1

C0 D0 E0 F0 G0 A0 B0 C1 D1E1 F1 G1A1 B1 F2 G2A2 B2 C3D3 E3 F3 G3 A3 B3C4 D4 E4 F4 G4 A4 B4 C5 D5E5 F5 G5 A5 B5 C6 D6E6 F6 G6 A6 B6 C7C2 E2D2

MASTER VOLUME

FUNCTION

TRANSPOSE SPLIT VARIATION

MAX

BRILLIANCEREVERB EFFECT TOUCH

MIN

PIANO1

VIBES STRINGS CHOIR

PIANO2 CLAVI.TONEE.PIANO 1 E.PIANO2

PIPE

ORGAN

HARPSICHORD

TRANSPOSE

MELLOW NORMAL

ORGAN

BRIGHT

COMBINATION

BASS

BRILLIANCE

ROOM

CHORUS SYMPHONIC

HALL 1

TREMOLO

HALL 2 STAGE

REVERB EFFECT TOUCH

SONG

SPLIT

MEASURE

HARD MEDIUM

TEMPO

SOFT

ECHO

FIXED

PIANO SONG

METRONOME

TEMPO

–

/ NO+ / YES

RECORDER

DEMO

METRONOME

–

TEMPO

NO + / YES

PIANO SONG

SONG

START

SELECT

REC

STOP

RECORDER

DEMO

SONG

START

REC

SELECT

STOP

STEREO SAMPLING

CLP-

811

PHONES

CLP-611

MIN MAX

PHONESMIC.MIC. VOL.

CLP-811

1 [POWER] ................................ page 3

2 [MASTER VOLUME]..................... 3

3 [FUNCTION] ................................. 24

4 [TRANSPOSE] / [ 5 [SPLIT] / [

s] .................................. 18

t]..................... 17

6 [BRILLIANCE] .............................. 15

7 [REVERB] ....................................... 15

8 [EFFECT]......................................... 15

9 [TOUCH] ........................................ 16

0 Voice selectors ............................... 13

Middle C

(CLP-811)

A [VARIATION] ............................... 14

B Display (LCD) ................................. 6

C [METRONOME] ........................... 19

D Tempo [▲] [▼] [-/NO] [+/YES]

.................................................. 6,19,26

E [DEMO/PIANO SONG] ................8

F Song select [▲] [▼] ....................... 26

G RECORDER [1] [2] ........................ 20

CLP-811/611 Panel Controls and Connectors

Rear Panel

MIDI

IN OUT

AUX IN

THRU

L+R

HOST SELECT TO HOST

PC-2 PC-1

MIDI

Mac

AUX OUT

RL/L+R

IN OUT

MIDI

AUX IN

AC INLET

THRU

HOST SELECT TO HOST

PC-2 PC-1

MIDI

Mac

AUX OUT

L+R

RL/L+R

AC INLET

(CLP-811)

H [START/STOP] ............. pages 10,21

I [REC] ............................................... 21

J Soft pedal ....................................... 14

K Sostenuto pedal ............................. 14

L Damper pedal ................................ 14

M [MIC.VOL] (CLP-811 only) .......... 38

N [MIC.] (CLP-811 only)................... 38

O [PHONES] ................................... 3,38

P MIDI [IN] [OUT] [THRU] ...... 39,48

Q HOST SELECT [MIDI] [PC-2]

[PC-1] [MAC] ............................39,40

R [TO HOST] ................................ 39,40

S AUX IN [R] [L/L+R] ...................... 39

T AUX OUT [R] [L/L+R].................. 39

U [AC INLET] ............................ 3,58,64

CLP-811/611 Panel Controls and Connectors

Basic Controls and Functions

This section describes the basic controls and operational features of your Clavinova. Please read through this information carefully.

Controlling the Clavinova

You control the Clavinova functions by pressing the buttons on the panel. The display indicates the results of each operation and keeps you informed of the current status.

Transpose

Name of voice, piano song, or function

Split

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

SYMPHONIC

TREMOLO

ECHO

HARD

MEDIUM

SOFT FIXED

HALL 1 HALL 2 STAGE

REVERB EFFECT TOUCH

Touch

Effect Metronome

Reverb Graphic

Brilliance

Frequently Used Buttons

[MASTER VOLUME]

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSI-

CHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL BRIGHT

BRILLIANCE

Piano song No., Measure count

SONG

MEASURE

TEMPO

Tempo

TEMPO [▲] [▼] / [–/NO] [+/YES]

SPLIT

CHORUS

ROOM HALL 1

SYMPHONIC

HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

SONG

HARD SOFT

FIXED

MEASURE

TEMPO

METRONOME

TEMPO

–

/ NO+ / YES

DEMO

PIANO SONG

SONG

SELECT

RECORDER

START

REC

STOP

[MASTER VOLUME]

Adjusts the output level to the speakers, headphones, and AUX OUT jacks.

TEMPO [▼] [▲]

Adjust the playback tempo for demo songs and piano songs. Also adjust the metronome tempo. You can set the tempo to any value between 32 and 280. Pressing [▼] and [▲] at the same time resets the

value to its standard setting (either 120 or else as set within the currently selected song).

• Holding down the appropriate increment/decrement button (TEMPO [▼][▲]/[-/NO][+/YES] or SONG SELECT[▼][▲]) causes the corresponding value to change continuously. In most cases the setting will stop upon reaching the maximum or minimum limit. In some cases, however, the setting will continue to loop through the available values.

• You can return any value to its factory default by pressing [-/NO] and [-/YES] at the same time.

CLP-811/611 Basic Controls and Functions

Memory Backup

The Clavinova includes a memory-backup feature than can retain settings while power is off and restore them when you resume play. Although all backup is set to OFF at time of shipping, you can use the FUNCTION mode’s Backup setting (F15 on the CLP-811, F14 on the CLP-611) to selectivety set backup on or off for different groups of settings.

If backup for a group is set OFF, all settings within that group return to their factory defaults each time power comes on. (A listing of factory defaults appears on page 47.) Note that the Clavinova unconditionally backs up and restores the Backup settings themselves, as well as any keyboard input that you have recorded.

Memory backup remains effective for about a week, after which all settings will return to their factory defaults. If you wish to retain your settings for a long period of time, please be sure to switch the Clavinova on for at least a few minutes each week.

CLP-811/611 function groups

CLP-811/611 functions can be broadly divided into three groups, as follows.

Voice and performance functions (p.13-p.19) Recording and playback functions (p.20-p.23) FUNCTION-mode settings (p.24-p.37)

FUNCTION mode...

You can use FUNCTION mode to set a wide variety of system and utility parameters. All parameters are originally set to standard default values (factory defaults), but you are free to change them to suit your particular needs.

Memory...

The Clavinova stores the various settings you have made within its internal memory.

Backup...

Use the memory backup feature to retain memory settings while power is off, so that they will be restored when you switch the power back on.

CLP-811/611 Basic Controls and Functions

Playing the Demos and Piano Songs

Your CLP-811/611 includes thirty built-in piano songs, together with demo songs for each of the different voices (one demo per voice). Let’s try playing some of these songs now. When playing piano songs you are free to turn off the left-hand or right-hand part so that you can practice along. You can also pick out a specific phrase for repetition-type practice.

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSICHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

HALL 1

SYMPHONIC

HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

Procedure

Switch on the power.

(If power is not yet on) Press the [POWER] button.

The power comes on.

We’ll adjust the output volume while playing the songs. For now, please set the [MASTER VOLUME] slider to approximately middle position.

Select the DEMO/PIANO SONG mode.

Press the [DEMO/PIANO SONG] button on the right

side of the panel.

The voice indicators begin cycling on and off. The screen indicates the new mode and prompts you for a song selection.

ROOM

NORMAL

BRILLIANCE

REVERB EFFECT TOUCH

MEDIUM

Press a voice selector or SONG SELECT button.

TEMPO

SONG

SELECT

RECORDER

START

STOP

REC

MEASURE

DEMO

TEMPO

–

/ NO+ / YES

PIANO SONG

SONG

TEMPO

METRONOME

For a listing of the internal demos and piano songs...

See page 46.

The Clavinova does not receive MIDI signals while DEMO/PIANO SONG mode is active. It is not possible to transmit demo and piano song data to other devices over MIDI.

DEMO/PIANO SONG mode cannot be selected if the Clavinova is in RECORDING mode or if it is playing back a recorded performance.

The word song, as used here,

SONG

refers to any stored sequence of performance data. Demo songs and piano songs both exist as stored performance data.

We’ll begin by playing some demos. Then we’ll proceed to play some of the piano songs and try out the special practice features.

CLP-811/611 Playing the Demos and Piano Songs

Playing the Demos

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

(After completing steps [1] and [2] above...)

Begin playback by selecting a voice.

Press the voice selector corresponding to the demo that you want to hear.

The voice indicator begins flashing and the Clavinova starts playing the demo.

Adjusting the volume

Move the [MASTER V OLUME] up or down to adjust the volume while listening to the playback.

HARPSICHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

NORMAL MEDIUM

BRILLIANCE

TRANSPOSE

MELLOW NORMAL BRIGHT

BRILLIANCE

HALL 1

REVERB EFFECT TOUCH

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1 HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

HARD

SOFT

FIXED

TEMPO

5 4

DEMO

MEASURE

SONG

TEMPO

METRONOME

TEMPO

–

/ NO+ / YES

PIANO SONG

SELECT

Continuous playback...

You can choose to have demos and piano songs play out one after another, in either numerical or random order. For details, see “Playing the Piano Songs” on the next page.

SONG

Using [VARIATION]...

If you press [VARIATION] while in DEMO/PIANO SONG mode, the Clavinova will begin playback of a randomly selected piano song.

RECORDER

SONG

START

REC

STOP

Adjusting the tempo

Although each demo song includes its own tempo setting, you are free to adjust the playback tempo by pressing TEMPO [▼] or [▲]. To return the playback tempo to its

NORMAL MEDIUM

HALL 1

BRILLIANCE

REVERB EFFECT TOUCH

Displays playback tempo as an offset (-99 to +99) from the demo song's internal tempo setting. A TEMPO indication of "---" means that playback is at the song's preset tempo.

original setting, press both TEMPO buttons ([▼] + [▲]) at the same time.

Stopping the playback

You can stop playback of the ongoing song by pressing either the [START/STOP] button or else the flashing voice selector.

Terminating DEMO/PIANO SONG mode

Press the [DEMO/PIANO SONG] button.

The screen returns to the previous display.

TEMPO

Tempo reset...

Selecting a different song for

SONG

playback automatically resets the tempo (so that the new song will replay at its internal tempo setting). During continuous playback, the tempo automatically resets each time the song changes.

Unlike piano songs, demo songs cannot be used for one-handed and repetition-type practice. (See page 11, 12)

CLP-811/611 Playing the Demos and Piano Songs

Playing the Piano Songs

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSICHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

SPLIT

CHORUS

ROOM

HALL 1

SYMPHONIC

HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

MEASURE

SONG

TEMPO

(After completing steps [1] and [2] on page 8...)

Select song(s) and begin playback.

-1 Press SONG SELECT

([▼] or [▲]) as necessary to make your selection. You can select a single song (by song number), or you can choose continuous playback of all songs. The “SONG” indication on the screen indicates the selection.

1,..,30 ALL RND

(Alternative: You can select a random song by pressing [VARIATION]. In this case, playback will begin immediately.)

Selects playback of one piano song, by its song number. Selects sequential continuous play of all demo and piano songs.

Selects continuous play of the demo and piano songs, in random order.

Song name Song No.

ROOM

NORMAL

BRILLIANCE

REVERB EFFECT TOUCH

MEDIUM

SONG

TEMPO

-1

METRONOME

–

NO + / YES

TEMPO

DEMO

PIANO SONG

SONG

SELECT

If you select ALL and then

press a voice selector ....

The Clavinova will begin sequential playback beginning with the demo song for the selected voice.

-2

RECORDER

START

REC

STOP

-2 After making your selection, press [START/STOP] to begin playback.

Adjusting the volume

Move the [MASTER V OLUME] up or down to adjust the volume while listening to the playback.

Adjusting the tempo

Each piano song includes its own tempo setting. Once you have selected a song, howev er, you are free to

NORMAL

BRILLIANCE

ROOM

MEDIUM

REVERB EFFECT TOUCH

SONG

TEMPO

change the setting (either before playback starts or while it in progress) by pressing TEMPO [▼] or

Displays playback tempo as an offset (-99 to +99) from the piano song's internal tempo setting. A TEMPO indication of "---" means that playback is at the song's preset tempo.

[▲]. To return playback to its original setting, press both TEMPO buttons ([▼] + [▲]) at the same time.

Stopping the playback

The Clavinova automatically prompts for new song selection when playback is finished. You can stop the song while playback is in progress by pressing the [START/STOP] button. You can then select another song as described in Step [3] above.

Terminating DEMO/PIANO SONG mode

Press the [DEMO/PIANO SONG] button.

The screen returns to the display shown just before you entered this mode.

Reset of playback tempo...

Selecting a different song for playback automatically resets the tempo (so that the new song will replay at its internal tempo setting). During continuous playback, the tempo automatically resets each time the song changes.

Next we will see how to switch off either the left-hand or right-hand part of a piano song so that you can practice the part yourself (one-hand practice). We will also see how to repeatedly play a single selected song phrase (to facilitate repetition-type practice).

CLP-811/611 Playing the Demos and Piano Songs

One-Hand Practice with Piano Songs

Each piano song has its left-hand and right-hand parts recorded on separate tracks: the right-hand part in Track [1], and the left-hand part in Track [2]. This makes it possible for you to switch off either part at any time. This feature is ideal for one-handed practice: just switch off one of the parts, then play the missing notes yourself in accompaniment with the other part.

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSICHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW

NORMAL BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1

TREMOLO

HALL 2

ECHO

STAGE

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

Procedure

Switch off the part that you want to play by yourself.

After selecting a piano song as described above, simply press [1] or [2] to mute (switch off) the right or left part.

When you switch off the track, the indicator above the track button goes off. (When you first select the song, both indicators will be on.)

• You can toggle each part OFF and ON by pressing the track button as needed.

Start playback and begin practice.

Press [START/STOP] to begin playback. Play the muted part yourself, for practice.

Synchronous start

You can set up one-part playback so that it begins precisely when you strike the keyboard. To select this feature, hold down the track button that you have set ON (either [1] or [2]) and press [START/STOP]. This sets the instrument into SYNCHRO START mode. Playback of the selected part will then begin when you hit a key on the keyboard.

When you select SYNCHRO START, a corresponding marking appears at the center of the display.

Using the left pedal as a START/STOP switch.

You can set the left pedal to operate in the same way as the [START/ STOP] button, so that you can start and stop playback without using your

hands. Left-pedal operation is determined by function F9; see page 33 for details.

NORMAL

BRILLIANCE

ROOM

REVERB EFFECT TOUCH

MEDIUM

SYNCHRO START marking

SONG

TEMPO

MEASURE

2 3

DEMO

TEMPO

–

NO + / YES

PIANO SONG

SONG

SELECT

SONG

TEMPO

METRONOME

RECORDER

START

REC

STOP

Parts cannot be switched off during continuous (“ALL” or “RND”) playback.

Switching parts ON/OFF during playback...

The [1] and [2] buttons can be used to switch tracks on and off even while playback is in progress.

Adjusting the volume of the muted part...

After switching off a part, you may notice that you can still hear it sounding in the background at low volume. This sound is intentionally left to provide a timing guide for your practice. You are free to adjust its volume, or to switch it off entirely, by using function F12. See page 34 for details.

If you hold down an unlit track button and press [START/ STOP]...

The track button comes on and the Clavinova enters SYNCHRO START. The track will start playing back when you hit a key on the keyboard.

Stopping the playback

The Clavinova automatically prompts for new song selection when playback is finished. You can stop the song while playback is in progress by pressing the [START/STOP] button.

CLP-811/611 Playing the Demos and Piano Songs

Reset of part selection...

The Clavinova automatically sets both tracks ON when you select another song.

Repetition Practice with Piano Songs

This feature lets you extract a phrase from any piano song and play it repeatedly. By combining this function with the “one-hand practice” feature described above, you can select and then practice a specific passage as many times as you like.

1 2

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSI-

CHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1

TREMOLO

HALL 2

ECHO

STAGE

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

Procedure

Set the phrase start and end points (“A” and “B”), and then

begin practice.

Select a piano song (by song number), then begin playback and listen for the desired start point. When playback reaches the beginning of the phrase you want to repeat, press [FUNCTION].

The Clavinova marks this point as Point A. The screen displays “A–”.

Continue listening for the end point of the phrase you want to repeat. When playback reaches the end point, press [FUNC- TION] once again.

The Clavinova marks this point as Point B. The screen now displays “A-B”.

ROOM

NORMAL MEDIUM

BRILLIANCE

REVERB EFFECT TOUCH

ROOM

NORMAL MEDIUM

BRILLIANCE

REVERB EFFECT TOUCH

TEMPO

SONG

SELECT

RECORDER

START

STOP

REC

MEASURE

DEMO

TEMPO

–

NO + / YES

PIANO SONG

SONG

TEMPO

METRONOME

This feature is not available with continuous (“ALL” or “RND”) playback.

If you want the phrase to start at the beginning of the song...

Press [FUNCTION] before you begin the playback.

SONG

Playback now automatically jumps back to the start point and the selected sequence begins repeating. You can now practice the passage as many times as you like.

Stopping the playback

To interrupt repeat play temporarily while retaining the Point A and B settings, press [START/STOP] once. You can then resume the repeat playback by pressing [START/STOP] once again.

To clear the A and B settings, press [FUNCTION].

If you select a different song....

The A and B settings are automatically cleared.

CLP-811/611 Playing the Demos and Piano Songs

Selecting and Playing Voices

Your Clavinova offers you an excellent selection of great-sounding voices (11 voices on model CLP-611, 12 voices on model CLP-811). You can use the VARIATION, BRILLIANCE, REVERB, and EFFECT features to vary the sound and feel of each voice.

The Clavinova also allows you to mix any two voices together (“DUAL mode”), and to select different voices for the right and left ranges of the keyboard (“SPLIT mode”). A built-in metronome is also provided.

Selecting a Voice

Voice selector

MASTER VOLUME

FUNCTION

MAX

BRILLIANCEREVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSICHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONEE.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1

TREMOLO

HALL 2

ECHO

STAGE

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

MEASURE

SONG

TEMPO

Procedure

ROOM

NORMAL

BRILLIANCE

REVERB EFFECT

Instrument icon

Name of voice

MEDIUM

TOUCH

TEMPO

To select a voice, press the corresponding voice selector.

The voice indicator lights up.

Try playing the voice. Adjust the volume as necessary by moving the [MASTER VOLUME] slider.

METRONOME

–

/ NO + / YES

TEMPO

DEMO

PIANO SONG

SELECT

RECORDER

SONG

START

STOP

To familiarize yourself with the features of each voice...

You can get a good feel for each voice by listening to its built-in demo (see page 46 of this manual).

About the EFFECT settings...

Each voice is set to its standard (default) effect at time of shipping. For infor mation about effects settings and how to change them, see page 15.

The ORGAN COMBINATION voice...

...can be set to any of eight builtin organ types. You can edit each of these types to produce your own customized sounds. You use function F6 to set the voice up; see page 30 for details.

REC

CLP-811/611 Selecting and Playing Voices

Using the Pedals

This section explains the use of the instrument’s three pedals.

Damper (Right) Pedal

The damper pedal functions in the same way as a damper pedal on an acoustic piano. While the damper pedal is pressed notes played have a long sustain. Releasing the pedal immediately stops (damps) any sustained notes.

Sostenuto (Center) Pedal

This pedal sustains only those notes whose keys are being pressed when the pedal first goes down.

If you step down on the damper pedal here, the note already in play and the three subsequent notes will continue to sound after their keys are released.

Keys that you strike after the pedal is already down are not held. This makes it possible to sustain a chord, for example, while at the same time playing other notes staccato.

If you step down on the sostenuto pedal here, only the first note will be held.

Soft (Left) Pedal

This pedal reduces the volume and slightly changes the timbre of the notes you play. The pedal has no affect on notes that are already playing when the pedal is first pressed.

Variable damper-pedal action...

The sustain length produced by the damper pedal varies according to how far you press the pedal down. The pedal is factory-set for 8-level action, but you can change this setting using function F11 (see page 34).

Changing the function of the left pedal...

You can switch the function of the left pedal so that it operates as a second [START/STOP] button rather than as a soft pedal. To change the operation, use function F9 (see page 33).

Changing the Sound ... [VARIATION], [BRILLIANCE], [REVERB], [EFFECT]

[BRILLIANCE]

[REVERB]

[VARIATION]

HARPSICHORD

ORGAN

COMBINATION

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

HALL 1

SYMPHONIC

HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

[EFFECT]

TRANSPOSE SPLIT

PIPE

VIBES STRINGS CHOIR BASS

ORGAN

[VARIATION]

You use this feature to select a variation on the standard voice.

Procedure

Press [VARIATION] to toggle the variation voice on and off.

The indicator lights up if the variation is selected.

HARD SOFT

FIXED

MEASURE

[–/NO] [+/YES]

SONG

TEMPO

DEMO

METRONOME

PIANO SONG

TEMPO

–

/ NO+ / YES

Default setting = OFF.

SELECT

RECORDER

SONG

START

REC

STOP

CLP-811/611 Selecting and Playing Voices

[BRILLIANCE]

Use this feature to set the brightness of the output sound. You can select from three levels.

The BRILLIANCE setting does not apply to the ORGAN COMBINATION voice. Instead, you can use function F6 (see page 30) to edit this voice.

MELLOW NORMAL BRIGHT

Light, mellow tone Standard brightness (=default setting) Clear and penetrating sound

Procedure

Press [BRILLIANCE] as necessary to select the desired setting, while watching the screen.

The screen displays the current

setting.

ROOM

BRIGHT

BRILLIANCE

REVERB EFFECT TOUCH

Selected brilliance

MEDIUM

TEMPO

[REVERB]

This feature sets the reverb type applied to the Clavinova’s sound. Each setting produces reverb acoustics similar to a particular performance environment. You are also free to adjust the “reverb depth.”

OFF ROOM HALL 1 HALL 2 STAGE

Procedure

Press [REVERB] as necessary to select the desired setting, while watching the screen.

The screen shows the current

setting. (Nothing is shown if reverb is set to OFF.)

No reverb applied. Acoustics of midsize room Sound of small concert hall Sound of large concert hall Stage-performance acoustics (=default setting)

HALL 1

BRIGHT

BRILLIANCE

MEDIUM

REVERB EFFECT TOUCH

Selected reverb

TEMPO

The reverb type and depth settings are common to all voices.

Changing the reverb depth

Hold down the [REVERB] button

Depth

to display the current depth setting. To change the depth setting: continue to hold down [REVERB] while pressing [-/NO] or [+/YES]. You can set to any value between 0

BRIGHT

BRILLIANCE

HALL 1

REVERB EFFECT TOUCH

MEDIUM

TEMPO

and 20. The default setting is 8.

[EFFECT]

Use this button to select an effect for the voice. You can set a separate effect for each voice. Within each voice you can also set separate depth levels for each of the four effects.

OFF CHORUS SYMPHONIC TREMOLO ECHO

No effect Shimmering, broadening effect Adds a deep, symphonic backdrop Tremolo effect Reverberating echo effect

“Depth” refers to the amount of reverb applied. Depth = 0: No reverb Depth = 20: Maximum reverb

Default settings...

A standard (default) effect is set for each voice prior to shipping.

CLP-811/611 Selecting and Playing Voices

Procedure

Press [EFFECT] as necessary to select the desired setting, while watching the screen.

The screen shows the current

setting. (Nothing is shown if the effect is set to OFF.)

BRIGHT

BRILLIANCE

CHORUS

HALL 1

REVERB EFFECT TOUCH

MEDIUM

Selected effect

TEMPO

Changing the effect depth

Hold down the [EFFECT] button to display the depth setting for the currently selected effect. (No value

Depth

will be shown if the effect is set to OFF.) To change the depth setting: continue to hold down [EFFECT] while pressing [-/NO] or [+/YES].

BRILLIANCE

HALL 1

BRIGHT

REVERB EFFECT TOUCH

CHORUS

MEDIUM

TEMPO

You can set to any value between 0 and 20.

TOUCH

You use this feature to set the relationship between key striking force and the resulting sound volume. Select from among four settings in accordance with personal preference, voice type, and performance goal.

HARD: MEDIUM: SOFT:

FIXED:

Considerable force is required to produce maximum loudness. Standard keyboard action (=default setting) Allows maximum loudness to be produced with relatively light key pressure. All notes are produced at uniform volume, regardless of striking force. You can select the volume by setting the velocity value, as described below.

Depth setting...

Depth = 0: No effect Depth = 20: Maximum effect

Default depths...

Standard default depths are set up for each effect type within each voice.

This setting does not affect the physical action of the keyboard.

The TOUCH setting applies to all voices.

[TOUCH]

MASTER VOLUME

FUNCTION

MAX

BRILLIANCEREVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSICHORD

PIPE

ORGAN

COMBINATION

Procedure

Press [TOUCH] to change the setting.

The display indicates the

current selection.

Volume adjustment for FIXED setting

If FIXED touch is selected, you can hold down the [TOUCH] button to display and change the velocity (volume) setting. To change the setting, hold down

[TOUCH] and press [-/NO] or [+/YES]. You can set to any value

between 1 and 127; the default setting is 64.

VARIATIONPIANO 1 PIANO 2 CLAVI.TONEE.PIANO1 E.PIANO2

NORMAL

BRILLIANCE

NORMAL

BRILLIANCE

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

ROOM

REVERB EFFECT TOUCH

ROOM

REVERB EFFECT TOUCH

ROOM HALL 1 HALL 2 STAGE

REVERB EFFECT TOUCH

MEDIUM

FIXED

SPLIT

CHORUS

HARD

MEDIUM

SYMPHONIC TREMOLO

SOFT

ECHO

FIXED

Selected touch

Only if FIXED

TEMPO

[–/NO] [+/YES]

SONG

MEASURE

TEMPO

Volume

METRONOME

–

/ NO + / YES

TEMPO

DEMO

PIANO SONG

SELECT

RECORDER

SONG

START

STOP

The clavinova measures keyboard striking force by monitoring the velocity at which the key moves downward when hit. If touch is HARD, MEDIUM, or SOFT, this physical velocity determines the volume.

Velocity = 1: Minimum volume Velocity = 127: Maximum volume

The FIXED-touch velocity setting applies to all voices.

REC

CLP-811/611 Selecting and Playing Voices

TRANSPOSE

This feature allows you to shift the pitch of the entire keyboard, so that you can continue to play in a signature that you are comfortable with while at the same time “transposing” to match the key of a singer or of another instrument. You can set the transposition in semitone increments. If you set it to 5, for example, then each keyboard C will produce the sound of F, and any song played in key of C will be produced in key of F.

[TRANSPOSE]

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

Procedure

Hold down [TRANSPOSE] and press [-/NO] or [+/YES] to set the transposition interval, in semitone increments. You can set to any value from -12 to +12; the default setting is 0.

HARPSI-

CHORD

ORGAN

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL

BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

HALL 1

SYMPHONIC

HALL 2

TREMOLO

STAGE

ECHO

REVERB EFFECT TOUCH

MEDIUM

HARD SOFT

FIXED

Transposition value (semitones)

TRANSPOSE

NORMAL

BRILLIANCE

ROOM

REVERB EFFECT TOUCH

MEDIUM

If transposition is set to nonzero, these indications and the numerical setting will remain on the screen.

TEMPO

MEASURE

[–/NO] [+/ YES]

SONG

TEMPO

METRONOME

–

/ NO+ / YES

TEMPO

DEMO

PIANO SONG

SELECT

RECORDER

SONG

START

STOP

Transposition settings...

-12: Down by twelve semitones (one octave)

0: No transposition; notes

produce their standard pitch

+12: Up by twelve semitones

(one octave)

High and low pitch limitations

The CLP-811/611 does not produce pitches above C7 (the highest note on an 88-key keyboard) or below A-1 (the lowest note). If you transpose up by n semitones, the highest keys on the keyboard are automatically sounded one octave lower than the expected tone. If you transpose down, the lowest keys are automatically raised.

REC

DUAL Mode (Mixing two voices together)

This feature selects simultaneous play of any two voices. You can combine dissimilar voices for a duetlike sound, or try working with similar voices to create a complex, layered type of sound.

1 2

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

Procedure

Entering DUAL mode

Simply press the two appropriate voice selectors at the same time (hold one down and then press the other).

The voice indicators for

both voices will come on.

The screen shows the name for both voices, with the lowest-numbered voice first (in accordance with the voice numbering shown at right).

PIPE

ORGAN

VIBES STRINGS CHOIR BASS

ORGAN

COMBINATION

HARPSI-

CHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

ROOM

NORMAL

BRILLIANCE

REVERB EFFECT TOUCH

Voice numbering 1

(CLP-811)

TRANSPOSE

SPLIT

MELLOW

ROOM

CHORUS HALL 1 HALL 2 STAGE

REVERB EFFECT TOUCH

MEDIUM

SYMPHONIC TREMOLO

ECHO

MEDIUM

HARD SOFT

FIXED

NORMAL BRIGHT

BRILLIANCE

First voice (Voice

PIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

VIBES STRINGS CHOIR BASS

SONG

MEASURE

TEMPO

Second voice

(Voice

TEMPO

PIPE

ORGAN

COMBINATION

DEMO

TEMPO

–

NO + / YES

PIANO SONG

SELECT

METRONOME

DUAL or SPLIT...

It is not possible to use the DUAL and SPLIT features at the same time.

Handling of VARIATION

The current VARIATION setting for each voice remains in effect when you first enter DUAL mode; the VARIATION indicator will be lit if VARIATION is selected for either or both voices. Once you have entered the mode, each press of [VARIATION] switches

HARPSICHORD

variation ON or OFF for both voices together. If you need to set variation ON for one voice only, you must do so before entering DUAL mode.

CLP-811/611 Selecting and Playing Voices

RECORDER

SONG

START

REC

STOP

You can use function F4 to make various settings related to dual play — see page 29 for details.

If you select [STRINGS] as one of the voices, you can use function F4 to select a slower string attack.

Terminating DUAL

mode...

Handling of effects

If both voices are set to their standard effects at the time you enter DUAL mode, the Clavinova will automatically select the effect and depth to be applied for the combination. In all other cases, the Clavinova will set the effect as follows.

[Type] a) If both voices are set to the same effect...

Each voice retains its original effect.

b) If effect for one voice only is OFF...

Each voice retains its original effect settings. One voice receives no effect; the other receives the effect set up prior to entry into DUAL mode.

c) If the two voices are set to different effects ...

The effect setting for Voice forced off until DUAL mode terminates.

d) If you change the EFFECT type while DUAL mode is in progress, the Clavinova will

1 is used for both voices. The effect setting for Voice #2 is

apply the newly selected effect to both voices.

[Depth] You can set the depth to any level using function F4.

Pressing any one of the voice selectors will select the corresponding voice and return you to normal mode.

SPLIT Mode (Dividing the keyboard)

This feature allows you to divide the keyboard into left and right zones. You can select the split point, and assign a different voice to each zone.

[SPLIT]

Voice selector

MASTER VOLUME

FUNCTION

MAX

BRILLIANCE REVERB EFFECT TOUCH

MIN

TRANSPOSE SPLIT

VIBES STRINGS CHOIR BASS

ORGAN

HARPSI-

CHORD

VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2

PIPE

ORGAN

COMBINATION

TRANSPOSE

MELLOW NORMAL BRIGHT

BRILLIANCE

SPLIT

ROOM

CHORUS

SYMPHONIC

HALL 1

TREMOLO

HALL 2

ECHO

STAGE

REVERB EFFECT TOUCH

MEDIUM

HARD

SOFT

FIXED

Procedure

Enter SPLIT mode.

Press [SPLIT].

The SPLIT indicator lights up. The Clavinova automatically

NORMAL

BRILLIANCE

selects the default voice (BASS if CLP-811; STRINGS if CLP-611) for the left zone.

You can use function F5 to make various settings related to split play — see page 29 for details.

Select the split point.

Hold down [SPLIT] and hit the key at which you want to split the keyboard. If you omit this operation, the Clavinova automatically sets the split point to F#2.

ROOM

REVERB EFFECT TOUCH

NORMAL

BRILLIANCE

SPLIT

MEDIUM

SPLIT

ROOM

MEDIUM

REVERB EFFECT TOUCH

Split point

TEMPO

SONG

SELECT

RECORDER

START

STOP

REC

DEMO

METRONOME

MEASURE

SONG

TEMPO

Voice for right zoneVoice for left zone

PIANO SONG

TEMPO

–

/ NO+ / YES

SPLIT or DUAL...

It is not possible to use the DUAL and SPLIT features at the same time.

The “split point” is the highest note in the left zone.

Handling of VARIATION

You can select VARIATION independently for each of the two voices. During SPLIT mode, the VARIATION lamp and voice indicator show the status of the right-zone voice only. While you are holding the [SPLIT] button down, however, the lamps change to show the status for the left-zone voice.

You can also use function F5 to set the split point (see page 29).

TEMPO

CLP-811/611 Selecting and Playing Voices

+ 50 hidden pages