Yamaha BEX 4 User Manual
BEX4CONTROLSYSTEM
3-BAND EQUALIZER
MAGNETIC PICKUP
PIEZO PICKUP ON BRIDGE
■ 3-Band Equalizer
BAT. (Battery Check) Indicator
This indicator will light when the battery
needs to be replaced.
Please replace the battery as soon as
possible when the BAT. indicator lights
(see battery replacement below).
BATTERY COMPARTMENT
MASTER VOLUME CONTROL
BALANCE CONTROL FOR
MAGNETIC PICKUP / PIEZO PICKUP
MAGNETIC PICKUP
PIEZO PICKUP
OUTPUT JACK
EQUALIZER Controls
LOW : Boosts or cuts the level of the
low frequencies.
MID : Boosts or cuts the level of the
middle frequencies.
HIGH : Boosts or cuts the level of the
high frequencies.
■ Battery Replacement
Catch
q Press the catch on the battery holder
in the direction indicated by the arrow
in the illustration in order to unlock it.
DC9V
6F22
(S-006P)
w Remove the old battery from the bat-
tery case, and insert the new battery
making sure that the (+) and (–) terminals of the battery.
Use only a DC9V, 6F22 (S-006P) or
equivalent battery.
e Press firmly so that the battery case
locks into place.
QC54910
99.Nov.
Printed in Taiwan
Loading...