Page 1
Ver. PMU-0808-01
Page 2
※The function and design of this product may chang without notice.
User Manual
YDR2105
Page 3
2
Contents
Important safety instructions .................................................................... 3
Overview
Basic contents ........................................................................................... 4
Identification of Product ............................................................................... 5
Product overview and Specifications ............................................................... 7
How to use
Registering security code ............................................................................. 8
Registering keys ...................................................................................... 10
Deleting keys .......................................................................................... 11
Unlocking the door from Outside (Security code) .............................................. 12
Unlocking the door from Outside (Touch key) / Inside ........................................ 13
Automatic / Manual Lock mode .................................................................... 14
Beep mode
............................................................................................. 15
Error sound ............................................................................................ 16
Emergency mechanical key override ............................................................. 17
Damage alarm
........................................................................................ 18
Heat alarm ............................................................................................. 19
Battery .................................................................................................. 20
FAQ ....................................................................................................... 21
Page 4
3
Important safety instructions
Do not attempt to dismantle or repair product.
Please contact your nearest authorised service agent for any
repairs or maintenance.
When cleaning use only a damp cloth to clean the lock body.
Note : Do not use any chemicals when cleaning
This product may be damaged by impact.
This could result in a malfunction.
Page 5
4
Basic contents
Front Body Front Body Gasket
[ YDR2105 ]
Back Body
Strike Strike packing plate
Rotation-resistant ring
Touch keys (4)
Mechanical key (2)
Back Body Gasket Back body Bracket
Page 6
5
Identification of Product
1. Front Body
① Keypad cover
② Emergency Power Supply Terminal
③ Keypad
④ LED
⑤ Key reader
⑥ Emergency override cylinder
Page 7
6
2. Back Body
① Battery cover
② Auto/Manual Lock switch
③ Registration button
④ Open/close button
⑤ Manual knob
⑥ Automatic locking sensor
⑦ Dead bolt
Page 8
7
Product overview
1. Convenience
1. Security code: Use any code number from 4-12.
2. Touch key: All keys must be programmed after installation.
3. Emergency mechanical key can lock and unlock the door at any time.
4. Automatic locking locks automatically after 7 seconds.
5. Backlit keypad: The keypad will illuminate when any buttons are pushed.
6. Volume control: Volume of signals can be adjusted to suit the environment.
7. The lock features a one-touch lock/unlock system.
8. Power consumption: A power saving circuit ensures long battery life.
9. Damage alarm: This product incorporates an alarm system that can trigger a
sensor when the lock is subject to attack or force.
Product Specification
Items Specifications
Power AA type alkaline 1.5V Battery x 4 (6v)
Emergency power 9V battery x 1 (Not included)
Function
Electronic controlled type (security code input or key recognition)
Dimension
Front Body 73mm[W] x 182mm[L] x 33mm[H]
Back Body 153mm[W] x 92mm[L] x 42mm[H]
Page 9
8
Registering security code
For security code, it is possible to register one code with 4 - 12 digits
but only one code can be registered to use at one time.
1. Press registration button (Inside)
2. Enter your security code
3. Press button
Caution
- When you register or change the security code, check for correct operation with
the door in the open position.
Open [Battery Cover] and Press the registration button.
Note : sound
The registration is completed with a sound.
Note : sound
Open [Keypad Cover] and enter the code you wish to
register. (4-12 digits)
Note : sound
Page 10
9
4. Check the Security code operation
Once registration is completed, make sure to open the lock with your new security
code while the door in the open position.
Caution
- It is recommended to change your pincode on a regular basis.
Page 11
10
Registering keys
For key registration, please contact your all Touch keys.
(up to 30 keys)
1. Press the registration button (Inside)
2. Touch key contact
3. Press button
4. Check the key operation.
Operating the lock with your Touch key to [Key reader]
Open [Battery Cover] and Press the registration button.
Note : sound
Contact all the Touch keys you wish to register on the [Key
reader] one by one.
Note : sound
Page 12
11
Deleting keys
1. Press the registration button (Inside)
2. Press the button
Open [Battery cover] and press the registration button.
Note : sound
Open [Keypad Cover].
Press and hold the button for 5 seconds.
The deleting process ins completed with sound.
Note : sound
Page 13
12
Unlocking the door from Outside (Security code)
1. Open the keypad cover.
2. Enter the security code.
Slide the [Keypad cover] up.
The fully open position.
Enter your registered security code, then press button to
unlock the door.
Note : sound
Notes
- You can only input your security code when the blue light on the keypad is on.
When the blue light turns off, press button and try again.
- If you want to cancel a security code due to the incorrect input, please press
button and then input the numbers again.
Caution
- If you fail to input the security code more than 5 times in succession, you will
hear a warning beep for 8 seconds, the door lock will not work for 1 minute.
- If you press the button to cancel the security code due to the incorrect input
more than 5 times, you will hear a warning beep.
Page 14
13
Unlocking the door from Outside (Touch key)
Open the lock using the Touch key from outside.
Contact the Touch key on [Key reader].
Unlocking the door from Inside
1. [Open/Close] button
Press the [Open/Close] button on the Back body in the lock
status to disable. Whenever you press [Open/Close] button,
the locks
open and close function performs repeatedly.
2. Manual knob
Turn the [Manual knob] to 90 degree to
lock or disable.
Locked Unlocked
Page 15
14
Automatic / Manual Lock Mode
The Automatic locking sensor detects the door closing and automatically
locks the door. Automatic lock mode is a factory default setting.
1. Setting Manual mode
Open the battery cover on the Back Body and set the
automatic/manual lock transition switch to manual.
Open the battery cover on the Back Body and set the
automatic/manual lock transition switch to automatic.
2. Setting Automatic lock mode
Automatic mode and Manual mode
- Automatic mode: Door locks automatically when closed.
(Note : If batteries are discharged completely, the auto locking function will note
operate)
- Manual mode: When closed the door remains unlocked, Press the [Open/close]
button on the Back body or key recognition button to lock the door.
Page 16
15
Beep mode
This function controls the operating sounds temporarily, the lock can
used without any audible beeps.
Slide the [Keypad cover] up.
Enter your registered security code, then press button.
You can control the volume sound.
Higher volume : press "3"
Lower volume : press "6"
Press button.
Caution
- Beep mode is a factory default setting.
- When you use Volume control function, door lock should be locked position.
- You can control the volume up to 8 level.
Page 17
16
Error sound
Warning beeps (Anti-Tamper functions)
1. Touch key, Security code error
Should an unregistered key or invalid
security code be entered more than 5 times
a warning alarm triggers, the door lock will
not operated for 1 minute.
Note : Sound ever 8 seconds and a
continuous beep will be audible at
the end of this warning period.
1. Press the
[Open/Close]
button on the
Back body.
The system will resume normal operation after 1 minute.
2. Enter the
security code.
3. Contact the
key.
If the keypad cover is open for more than 5 times without
using the security code or key, you will hear a sound every 8
seconds and continuous beep will be audible at the end of
this warning period. The system then will resume normal
operation after 1 minute.
2. Wrong-try Lock-out
[Touch key] [Security code]
3. Shutting off alarm
Page 18
17
Emergency mechanical key override
Use the emergency key to lock or unlock the door.
- If you forget the security code.
- If battery power is depleted.
Page 19
Damage alarm
This function is activated if the lock is forced open.
Disable emergency beep
18
Alternately use the registered key or
input the security code, then press
button to unlock the door.
A sensor will detect force or impact and trigger a continuous
warning beep(alarm) for 5 minutes.
Note : sound (2 minutes)
Open the battery cover on the Back Body and either remove
the batteries or press the registration button.
[Indoor]
Page 20
19
Heat alarm
It trigger the alarm and automatically
unlocks if the lock detects the tempertature
as high 60 degree Celsius (140 degrees
Fahrenheit).
The detection temperature can be
different depending on the installation
circumstance.
Caution
- If the sensor is exposed to the direct ray of sun light for a long time, it will trigger
the heat alarm.
- The heat alarm can be turned off by removing batteries or press [open/close]
button.
Page 21
20
Battery
1. When to replace batteries
When you use the Touch key or security code to open
the door, display lamp flashes red indicating that
batteries should be replaced. Replace all batteries within
7 days from initial warning.
Note : sound
2. Batteries used
3. External power source
Should the battery replacement time expire. It is possible
to open the door by placing a 9v battery on the external
power source to power the lock then operate as usual
using the Touch key or keypad.
Operating temperature range
▶ -20 - 55°C
Operating voltage range
▶ DC4.5V~DC6V
(LRT 1.5V AA sizex4)
Cautions
- Batteries must be alkaline.
- When batteries are discharged completely, it is necessary to replace all. Never
mix new and old or batteries.
- If you insert batteries in incorrect or wrong direction, leakage or rupture could be
occour. The lock may also malfunction.
- Battery leakage could result in product damage, be sure to check on a regular
basis.
Page 22
21
FAQ
If the lock is not operating normally, refer to following points. Should the problem
continue after following these instructions, contact your nearest service centre.
• Security code can not be set.
- Be sure to press each digit within 5 seconds the display lamp should be on
during the security code setting. Try resetting the code as indicated page 10.
• Automatic locking function does not operate.
- Make sure that Automatic / Manual transition switch is set to the Automatic
locking position.
- Open the door and Press the open sensor to activate the dead bolt to verify the
operation with the door open.
- Ensure the batteries are fully charged.
• The door does not lock when closed.
- Check the bolt function and striker alignment.
• The lock will not power up.
- Ensure all batteries are correctly inserted and fully charged.
•
The lock will not open when entering the security code and button.
- Ensure you enter the security code when the keypad lamp is on.
Page 23
22
MEMO
Loading...