Yale PR50, PR150, PR50BF, PR150BF, 5120 Installation Instructions Manual
...
Model Numbers Included:
PR50(BF) / PR150(BF)
5120(BF)(T)
Parallel Rigid Arm Door Closers
with or without Stop
Installation Instructions
80-9350-2530-010 (06-09)
CAUTION
An incorrectly installed or improperly
adjusted door closer can cause
property damage or personal injury.
These instructions should be followed
to avoid the possibility of
misapplication or misadjustment.
CAUTION
Additional Closer Options:
- “DL” indicates Delayed Action closing.
- “H” indicates Hold-Open function. These components are handed
- “T” indicates Thumbturn actuated Hold-Open control.
Optional Accessories:
- 213 Dropplate
- 293L, 890, 891 Soffit Plate Accessories.
NOTE: For special applications a separate door and frame preparation template is packed with these instructions. In those
cases, use this instruction sheet for installation sequence and closer adjustments only.
Standard Frame Installation
Closer mounts on opposite to hinge (push) side of door. PR51 Parallel Rigid Non Hold Open arm illustrated.
See Pages 3 and 4
of Door
Hinge
Right Hand Door – RH
Left Hand Reverse – LHR
Edge
Edge
Hinge
of Door
Right Hand Reverse – RHR
Narrow Frame Installation
Closer mounts on opposite to hinge (push) side of door. 5121 Parallel Rigid arm with stop illustrated.
890 and 891 accessories required for this application (supplied separately).
See Pages 3 and 4
Hinge Edge
of Door
Right Hand Door – RH
Left Hand Reverse – LHR
of Door
Hinge Edge
Right Hand Reverse – RHR
Flush Partition Installation
Closer mounts on opposite to hinge (push) side of door. 5121T Parallel Rigid arm with Thumbturn Hold Open illustrated.
293L accessory required for this application (supplied separately).
See Pages 3 and 4
Left Hand Door – LH
Left Hand Door – LH
Right Hand Door – RH
Left Hand Reverse – LHR
Hinge Edge
of Door
of Door
Hinge Edge
Left Hand Door – LH
Right Hand Reverse – RHR
Components
Soffit
Plate
293S Block
(provided)
Optional
Accessories
"BC" Valve
Arm Options
Power Adjustment Screw
(1/8 Hex Drive)
4
Closer
Size
Stamp
PR Arm Assembly
"L"Valve
Screw Pack
Riveted Elbow
"S"Valve
Closer
Arm
Secondary Arm
For Blade Stop
891 Spa erc
Main Arm
Screw
Main Arm
Friction Hold Open Nut
Riveted Elbow
For Frame
or Blade Stop
890 Bracket
For Flush Partition
293L Bracket
PR Hold Open Arm Assembly
Page 2
Standard
Optional
Removable Stop
Riveted Elbow
CLP Arm Assembly
Stop only
Preparation for Fasteners
Fasteners
Self-Drilling Screw
1/4” - 20 machine screw
Sleeve nuts and bolts
Through-bolts and
grommet-nuts
Door or Frame
Aluminum
or Metal
Wood
Metal
Hollow
Metal
Aluminum
or Wood
All
Thumbturn Hold Open
Riveted Elbow
CLP Arm Assembly
with Thumbturn
Drill-Sizes
No drill required
3/16” (4.30 mm)
Drill: #7 (0.201” dia.)
Tap: 1/4” - 20
9/32” (7 mm) through;
3/8” (9.5 mm) door face
opposite to closer
3/8” (9.5 mm) through
9/32” (7 mm);
3/8” (9.5 mm) dia. x
3/8” (9.5 mm) deep on
door opposite to closer
Removable Stop
Note: MUSTWood doors be
pre-drilled when using
Self-Drilling Screws.
Loading...