Filament Replacement Instructions
1
Remove the stopper Lift the cartridge Change the filament
2
3 4 5
and chip
1-1
1-2
Take out the stopper by
rotating anti-clockwise.
2-1 3-1 4-1
Press the joint of the casing
of the filament cartridge
gently and open it.
2-2
Put a new filament parameter
chip in place. Make sure it is
placed in the correct direction.
3-2
B
Take out the accessories
from the filament cartridge
and replace them with new
accessories.
A. Filament parameter chip
B. Filament
C. Desiccant pouch
C
A
Put a new desiccant pouch
in place.
3-3
Close the cartridge
4-2
Reassemble the cartridge
and pull the filament to
make sure it is discharged
smoothly.
Screw in the stopper
tightly
5-1
5-2
Replace the stopper and
screw it up clockwise.
Turn the cartridge over
and make sure the
stopper has been
tightened to its position.
Note
Direct the filament through
the guide hole to put out
the filament easily.
1. Do not use the filament cartridge in an environment with heavy dust or high humidity.
2. Unsealed filament kit must be used as soon as possible to ensure good printing quality.
3. If product is defective out of the box, please contact customer service and return the filament and parameter
chip with the original packing for exchange.
Loading...