XYZ Printing da Vinci Jr. WiFi Pro User Manual

Download

da Vinci

Jr. WiFi Pro

Product Overview

Unboxing

Software Introduction

Accessories Installation

da Vinci Jr. WiFi Pro

User Manual

Functions

Selective Module

Product Specication

Maintenance and Support Details

P 1

da Vinci

The purpose of this user manual is to help users understand and use the da Vinci Jr. WiFi Pro 3D printer correctly. It contains the operating instructions, maintenance information and application skills of the da Vinci Jr. WiFi Pro 3D printer.

To learn more about the latest news of the da Vinci Jr. WiFi Pro 3D printer, please contact local dealers or visit the ofcial

website of XYZprinting: http://www.xyzprinting.com

Jr. WiFi Pro

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

Editions

New editions of this manual incorporate new and changed material different from previous editions. Minor corrections and updates may be incorporated into reprints of the current edition without releasing additional announcements or documentation regarding the updated version. The User Manual is for user reference only. If you need to obtain the latest information, you are welcomed to visit the XYZprinting website: www.xyzprinting.com

Before launching XYZmaker Suite, connect the PC to the

Before using this printer, please rst remove the

fixed materials from the extruder module and print bed. Switching on the printer's power without

removing these xed materials may damage the

machine.

printer by using the USB cable. For a better user experience, it is strongly advised to follow the proper procedure for using the product.

Registration via XYZmaker Suite before your rst

print is strongly recommended. When registered with XYZprinting, you will receive latest technical supports and updates. To register, simply click "Register Now" to begin.

Before you start printing, please afx the bed tape on the print

bed. The bed tape may be removed after printing is complete. (Bed tape can be reused.)

You may use XYZmaker Suite to initiate manual updates to the

printer rmware and software. When using the printer for the rst

time, we recommend connecting to the Internet and performing manual update once to obtain the latest resources.

The optimal room temperature for printing is 15-32 ◦C (60-90 ◦F). Printing quality may be affected if room temperature is higher or lower.

If you need more detailed technical support and program resources, visit the website: https://support.xyzfamily.com/en-GB/Help

Before operating the printer, insert the SD card in the SD card port

to make sure that the printing program is able to run properly.

Please retain all original packaging material when shipping your

product for warranty purposes. Shipping without original packaging materials may cause product damaged during the shipment and may cause chargeable service fees.

Please carefully read the contents of the product

instruction manual before using this product.

P 2

Product Overview

Accessory Checklist

da Vinci

A: Filament movement area

B: Feed module

C: Detector

D: Extruder

E: Filament

F: Print bed

G: SD card port (Storage format: FAT32)

H: Control and display panel

I: Front cover

Jr. WiFi Pro

USB Port

Power Connector

Power Switch

Quick Guide and

．

Warranty

Tube Remover

．

Card

Guide tube

．

Cleaning Brush

．

SD Card

．

Power Adapter

．

Feeding Path

．

Cleaning Pin

Power Cord

．

Scraper

．

Important Safety Instruction for Use of Maintenance Tools

• The maintenance tools provided should be only handled by an adult. Please keep the tools away from children.

• Store the gear cleaning brush properly. This tool shall only be used to clean the specied parts of the machine

and should not be used for the cleaning of other parts to prevent damaging the machine.

• The scraper is used to remove the object from the print bed when printing has nished. The bed tape is

reusable and it can be replaced when it has worn out.

Important Safety Instruction

• Do not place the printer in humid or dusty environment such as bathrooms and high trafc areas.

• Do not place the printer on a rickety surface and/or inclined position. Printer may fall down/or tumble and it may cause serious injury.

• Please keep the front door closed during printing to avoid injury.

• Do not touch the interior of the printer while printing. As it may be hot and include moving parts.

USB Wire

．

Nozzle Cleaning Wire x 5

Bed Tape x 3pcs

．

Bundled lament

．

Product Overview

P 3

Unpacking the Product

da Vinci

Jr. WiFi Pro

Open the box and then remove the accessories and cushions.

Remove all xing tapes and the

cushion between print bed and extruder module.

Be sure to remove the xing

cushion from the axis.

Remove the plastic bag and the tape.

Remove the securing styrofoam

and xing tapes on the print bed.

Be sure to remove the xing tapes

at the back of the print bed.

Insert the SD card that came with the printer into your

computer or download the latest XYZmaker Suite from the

ofcial Website and install it on the computer.

Please use the original power adapter and power cord along with the printer in order to prevent

product damage or safety hazards caused by differences in voltage specications.

Be sure to remove the paper

cardboard near the Y-axis.

Unpacking the Product

Please removal all xed materials

before turning on the printer to prevent the machine from damage.

Use the USB cable to connect the printer to PC. Connect

the power cord to the printer then turn on the power switch.

P 4

Software Introduction

XYZmaker Suite is an all-in-one 3D design software application that provides a comprehensive range of 3D tools for XYZprinting's 3D printers.

XYZmaker is a 3D modeling application that comes with an intuitive user interface and a wide range of interesting 3D modeling tools and 3D model templates. You can use XYZmaker to do the 3D modeling and print out with XYZprint.

1. Open the XYZmaker and build the model on the operating platform.

da Vinci

Jr. WiFi Pro

2. Click [File] > [XYZprint Plugin] to open the printing software XYZprint.

XYZengraver is an engraving software tool designed for our laser engraver module. Please refer to the "Software Functions" section in the "Optional Modules" chapter on Page 20.

Software Introduction

P 5

da Vinci

XYZprint is a 3D printing application with fast slicing capability. It lets you preview your 3D models in full color and monitor printing progress in real time.

Jr. WiFi Pro

1. Open the XYZprint software and choose DASHBOARD and select the 3D printer that is connected.

3. Click on the object to adjust the size you want.

2. Import your favorite 3D les.

Import File

New File

Save File

4. In the Print menu, adjust the print parameters.

5. When you're done adjusting the print parameters you need, click

[PREPARE]

6. After preparing, please check if the object is a

complete model. After the conrmation, you can click

[PRINT] or [SAVE]

Software Introduction

P 6

Guide Tube Installation

da Vinci

Jr. WiFi Pro

Please push the tube remover into the extruder

module port then ensure that the guide tube has been tightly inserted into the extruder module port.

Place the extruder module that the tting pin is

secured the proper location. Then, insert the black ribbon connector to complete the installation.

How to Remove the Guide Tube

Put a guide tube though the guide tube movement area

and then insert it into the extruder module. To nish the installation, insert the guide tube downward rmly.

Guide tube

Tube remover

Note: Please insert the guide tube (B) into the tube remover (A) which assist to the guide tube installation and remove. Please keep the tube remover on the guide tube after guide installation.

Use two fingers press

1 3

the Feeder on the Feed module.

Pull out the guide tube.

Accessories Installation

Please gently press the tube remover, pull the guide tube upwards to remove the guide tube.

P 7

Filament Spool Ring Installation

Note: Please refer to this step if the axle ring is not installed on the spool.

da Vinci

Jr. WiFi Pro

Loosen the spool ring mounting

screw from the used lament spool

with a screwdriver, and remove the spool ring.

Remove the genuine filament and chip,

and then install the sensor chip. Please note the direction of the mounting hole on the chip to attach the chip correctly.

Filament Installation

Note: If you are not too sure where the feed module tube port is, you may open the casing of the machine to see the indication label.

Place the assembled filament spool (with the spool

axle rings) on the lament holder on the left side of the

printer.

Caution: Pay attention to the direction the

lament is being pulled out and ensure that the lament spool axle is rotating smoothly.

Insert the spool ring from

both sides of the new lament

spool. Tighten the spool ring

with a screwdriver to nish the

installation process.

Click “LOAD FILAMENT” , pull out a section of the lament

and insert it into the feed port. Push the lament all the way to the top so that the front end of the lament is completely

inserted into the feed module. (Please refer to the "LOAD FILAMENT" sections in the "UTILITIES" chapter)

Note : Before pushing the lament into the guide hole, please cut the tip of the lament off at a 45° .

Accessories Installation

P 8

da Vinci

Jr. WiFi Pro

Button Instructions

After switching on the printer's power, the user may use the display panel at the front of the printer to understand its status and usage data. The functional buttons on the right allow the user to perform the relevant operations.

Button

Down

Left

Right

HOME

Functions

Direction Up

Direction Down

Back to previous menu / Reduce the adjustment value

Forward to submenu / Increase the adjustment value

OK; conrm selection/settings

Home Button, return to main menu

Function

BUILD FROM CARD

UTILITIES

SETTINGS

INFO

MONITOR MODE

Description

Sample print from SD card

Features such as lament replacement, module replacement and print bed calibration

Settings such as language display and energy saving

The rmware and printer statistical information

Monitor of extruder and print bed working temperature and printing progress

Jr. WiFi Pro BUILD FROM CARD UTILITIES SETTINGS

Functions

P 9

da Vinci

Jr. WiFi Pro

BUILD FROM CARD

UTILITIES

SETTING

Top Menu

CHANGE SPOOL

HOME AXES

Z OFFSET

JOG MODE

CALIBRATE

CHANGE NOZZLE

CLEAN NOZZLE

USER FILAMENT

Sub MenuHome Menu

LOAD FILAMENT

UNLOAD FILAMENT

Page

P11

P12

P13

P14

P15

P24

INFO

BUZZER

LANGUAGE

ENERGY SAVE

AUTO LEVEL

RESTORE DEFAULT

STATISTICS

SYSTEM VERSION

SPOOL STATS

WIRELESS INFO

LEVELING INFO

NOZZLE STATS

P16

P17

HELP

MONITOR MODE

The map above shows the functions your may access with the control panel on the printer.

For detailed descriptions of each function, please refer to their respective pages in this user manual.

Maps of Functions

P17

P 10

BUILD FROM CARD

1 sample models are built into the printer. You may begin your rst 3D prints with the samples.

To print a sample

：

da Vinci

Jr. WiFi Pro

BUILD (SD CARD) SAMPLE

Select a sample

1 2 3 4

to print.

Put the bed tape on the print bed.

START BUILDING SAMPLE NO YES

Select "YES" to start printing.

Remove the printed object when the printing has finished and the print bed has descended.The bed tape is reusable and it can be replaced when it's worn.

LOAD FILAMENT

*Please refer to P.24 for third party laments.

Enable the LOAD FILAMENT function on the control panel…

Jr. WiFi Pro BUILD FROM CARD UTILITIES SETTINGS

Select "UTILITIES" > "CHANGE SPOOL" > "LOAD FILAMENT" > "USE XYZPRINTING SPOOL?" > "YES".

LOAD FILAMENT EXTRUDER HEATING TEMPERATURE 210 °C PLEASE WAIT

UTILITIES CHANGE SPOOL HOME AXES Z OFFSET

LOADING PLEASE WAIT

CHANGE SPOOL LOAD FILAMENT UNLOAD FILAMENT

USE XYZPRINTING SPOOL? YES NO

CHECK FILAMENT OUT FROM NOZZLE [

]　TO RETRY

＜

[ OK ]

TO RETURN

2 3

Insert the lament right into the feed hole. The printer will load the lament automatically.

After loading, select "OK" to continue. The printer will warm up to the operating

temperature and load the lament.

UNLOAD FILAMENT

Enable the UNLOAD FILAMENT function on the control panel…

Jr. WiFi Pro BUILD FROM CARD UTILITIES SETTINGS

Select "UTILITIES" > "CHANGE SPOOL" > "UNLOAD FILAMENT".

UNLOAD FILAMENT EXTRUDER HEATING TEMPERATURE 210 °C PLEASE WAIT

Wait for the extruder to heat up and unload lament. Press "OK" and pull out the lament.

UTILITIES CHANGE SPOOL HOME AXES Z OFFSET

UNLOADING PLEASE WAIT

[ OK ] TO RETURN

Note: Always implement the "UNLOAD FILAMENT" function when replacing the Spool in order to ensure proper

removal of the lament. Cutting lament too closely to the Extruder Module may result in residual lament

blocking and causing damage to your Extruder Module.

CHANGE SPOOL LOAD FILAMENT UNLOAD FILAMENT

UNLOAD COMPLETED

[ OK ] TO FINISH

Conrm that the lament is owing out from the extruder; If the lament ows

out, press "OK" to exit.

UTILITIES

P 11

HOME AXES

“HOME AXES” moves the extruder to the lower left corner. To home axes

：

da Vinci

Jr. WiFi Pro

HOME AXES ARE YOU SURE? NO YES

HOME AXES COMPLETED

[ OK ] TO RETURN

Select “YES” to proceed.

Z OFFSET

The user may use the Z OFFSET function to adjust the gap between the printing nozzle and the printing bed.

When adjusting the gap, use and keys to increase or decrease it (the minimum adjustment scale is 0.05mm).

[ ^ ] Z OFFSET 0.91 mm [ v ] [ OK ] WHEN FINISH

After adjusting, press "OK" to exit.

Note:

The product has been tested and adjusted with precision at factory. We suggest that

you write down the default Z OFFSET value before performing adjustment.

The recommended distance between the nozzle and print bed(with bed tape securely

fastened) is 0.3mm. This should allow two sheets of copy paper to be drawn out smoothly but six sheets of copy paper cannot be passed.

JOG MODE

“JOG MODE” is used to manually move the extruder and the print bed. Before you carry out this function, move the extruder module back to its original position (HOME AXIS).

How to move the extruder:

JOG MODE X-AXIS Y-AXIS Z-AXIS

Select the direction of the module or the print bed

1 2

to be moved. Note: "X-AXIS": left and right movement of the extruder module, "Y-AXIS": front and back movement of the print bed, "Z-AXIS": up and down movement of the extruder module.

Z-AXIS [ OK ] >> EXIT

[－ ] ▲ [ 0.1mm ] ▲ [ ＋] 1mm

10mm

Select desired increment of travel with

and buttons, and press or

button for desired direction to move the extruder.

UTILITIES

P 12

da Vinci

CALIBRATE

Note: Please remove print bed tape before you activate the calibration function on your printer.

Calibration is enabled for this new extruder module.

Please update printer rmware via XYZmaker Suite before using the new extruder.

Press the detection head on the right side of the print head according to the instruction of screen message, followed by pressing OK.

PRESS SWITCH NEXT TO EXTRUDER

[OK] TO CONTINUE

Results displayed after the print bed calibration:

A. If the printer shows "CALIB COMPLETED", and "AUTO-LEVELING IS DISABLED NOW" is displayed on the 3rd line, it indicates that the levelness of the print bed is good. Press "OK" to exit and print.

B. If "AUTOLEVELING IS ENABLED NOW" is displayed under "CALIB COMPLETED", it indicates that the print bed is tilted slightly. The printer has enabled the auto-leveling function.

Note: The auto-leveling function can improve the printing quality, but the printing time will be longer. You can disable this function in Settings depends on your needs.

Jr. WiFi Pro

CALIBRATE SUCCESS AUTO LEVEL OFF [OK] TO RETURN

Note: If the detection result is "FAIL", press "OK" continuously to exit. Select "INFO" > "LEVELING INFO" to check the print bed levelness data, and contact our customer service to inform the measurement data.

CALIB FAILED

[OK] TO CONTINUE

NOTE：1. The stains on detection head and the top of the extruder module will affect the detection result. Before the calibration, please remove the dirt. Please remember to install and position the extruder module.

2. If there is residue on the top of the extruder module, the detection result will be shown as below. Please be sure to remove the dirt and recalibrate.

A 0000 0000 0000 B 0000 0000 0000 C 0000 0000 0000 [OK] TO RETURN

PLEASE CONTACT CUSTOMER SERVICE FOR LEVEL ISSUE [OK] TO RETURN

CALIBRATE SUCCESS AUTO LEVEL ON [OK] TO RETURN

A 0317 0320 0313 B 0318 0323 0308 C 0312 0300 0440 [OK] TO RETURN

CALIBRATE COMPLETED

After detecting the print bed, the detector by the extruder module may be switched off automatically. Ensure the detector is switched off before printing.

Detector

Press

UTILITIES

P 13

da Vinci

Jr. WiFi Pro

CHANGE NOZZLE

Carry out the CHANGE NOZZLE function before changing modules. Once the extruder module has moved to the operating position, you can turn off the power and change the module.

CHANGE NOZZLE MODULE NOW ? NO YES

CHANGE NOZZLE

Remove the extruder

"Press the white button at back of the extruder to release it."

REPOSITION NOW

PLEASE WAIT

Exchange the extruder module

Lightly press the spring around the

feed hole and remove the lament

guide tube.

YOU CAN TURN OFF POWER & CHANGE NOZZLE NOW

Press on the harness chips and disconnect the cable.

Connect the at cable to the

new extruder module.

( Be sure to insert the at cable

in the right direction. )

Install the lament guide

tube to the extruder module

Insert the guide tube into the feed hole all the way down and install the extruder back to the printer.

UTILITIES

Install the extruder

Press the white button and align the extruder module with the bracket. Once aligned, release the white button to connect the extruder module with the bracket.

P 14

CLEAN NOZZLE

●

Tools Preparation

A. Feeding Path Cleaning Pin B. Cleaner Wire

●

Guide to Clean Nozzle

da Vinci

Carbon deposits and dirt accumulated in the nozzle will increase with the printing times and impact the printing quality. We suggest that you clean the nozzle after every 25 hours of printing.

Jr. WiFi Pro

Select "UTILITIES" > "CLEAN NOZZLE" > "YES".

START CLEANING NOZZLE NOW? NO YES

Insert the cleaner wire into the hole of the nozzle carefully with a nipper.

After inserting the wire, press "OK" to exit.

Wait for the printer to warm up to the operating temperature.

You can start cleaning when "READY FOR CLEAN " is displayed.

READY FOR CLEAN

[ OK ] WHEN FINISH

Note: If the materials still cannot extrude normally after performing the CLEAN NOZZLE function, please follow the steps below to clean the feeding path again.

“CLEAN NOZZLE” function again and wait until the extruder is heat up to working temperature. (Care should be taken

during the operation to avoid potential burn injuries.)

Press the spring around the

2 3 4

feeding path and pull out the guide tube. (Do not detach

the white at cable above the

nozzle.)

Please place the extruder to original position (HOME AXIS) and calibrate the print bed (CALIBRATE). Then, do print bed leveling

after completing clean nozzle. (Please refer to the "Print Bed Leveling" section).

Insert the feeding path cleaning pin into the feeding path as far as it can go, and stick it back and forth to remove the carbon deposits and dirt completely.

After cleaning, insert the guide tube onto the nozzle.

UTILITIES

P 15

da Vinci

Jr. WiFi Pro

BUZZER

When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or issue is detected. Buzzer is turned on by default. To switch off the buzzer:

BUZZER [ ON ] OFF ON

Select “OFF” and press “OK” to change the setting.

LANGUAGE

You may switch the display language on the printer between English and Japanese. The default lanague is English. To switch to Japanese:

LANGUAGE [ EN ] ENGLISH

ニホンゴ

FRANCAIS

Select “

ニホンゴ

"and press “OK” to change the setting.

ENERGY SAVE

LED luminaires are installed in the printing chamber. To save energy consumed, the lighting will go off after idling for 3 minutes (shown as 03M on the display) by default. To select a longer time interval:

ENERGY SAVE [ OFF ] OFF 03M 06M

Select “06M” (for auto off after 6 minutes) or “OFF” (for never turn off the LED) and press “OK” to change the setting.

AUTO LEVEL

The printer will adjust the configuration based on the detecting result automatically while "AUTO LEVEL" is enabled. The printing mode helps to improve printing quality with slower printing speed. You may switch off the function if necessary. To change the setting of auto-level:

AUTO LEVEL [ON] OFF ON

Simply select “OFF” and press “OK” to change the setting.

RESTORE DEFAULT

All settings can be reset to factory default with a few clicks. To reset all settings at once:

RESTORE DEFAULT ARE YOU SURE? NO YES

Simply select “YES” and press “OK” to reset.

STATISTICS

In “STATISTICS”, you can check the accumulated print time and last print time.

STATISTICS LIFETIME 00007h LAST TIME 07h45m [ OK ] TO RETURN

SETTINGS

P 16

SYSTEM VERSION

da Vinci

Jr. WiFi Pro

Firmware version is shown here. For stable printing performance, it is advised to keep the rmware up to date. To check for rmware updates, please go to XYZmaker Suite.

SYSTEM VERSION

0.1.3

[ OK ] TO RETURN

SPOOL STATS

“SPOOL INFO” provides the information on cartridge level (see REMAINING), and the capacity, color and material of the

lament. Press to “OK” to the second page.

SPOOL STATS REMAINING 000m CAPACITY 100m [ DOWN ] NEXT PAGE

COLOR BLUE

[ DOWN ] NEXT PAGE

MATERIAL PLA

[ OK ] TO RETURN

WIRELESS INFO

The “WIRELESS INFO” function displays the WIFI information of the printer; click “OK” if you want to exit.

IP ADDRESS XXX.XXX.X.XXX

[DOWN] > NEXT PAGE

LEVELING INFO

“LEVELING INFO” function shows print bed leveling data and press “OK” to change the setting. If the detection result is "FAIL" when you use CALIBRATE function and contact our customer service to inform the measurement data.

A 0246 0256 0260 B 0232 0243 0250 C 0219 0227 0235 [ OK ] TO RETURN

NOZZLE INFO

"NOZZLE INFO" shows nozzle information and lifetime. If you want to change setting, please press"OK".

TYPE : EXTRUDER DIAMETER : 0.4mm LIFETIME 00007h [ OK ] TO RETURN

HELP

The URL to XYZprinting website can be found here. You may go to the website for the latest information, product documents, tutorial video and more.

MORE INFO www.xyzprinting .com [ OK ] TO RETURN

MONITOR MODE

"MONITOR MODE" shows the temperature of the extruder. See below for the working temperature for the parts in different modes.

MONITOR MODE EXTRUDER 024。C

[ OK ] TO RETURN

INFO

P 17

da Vinci

Jr. WiFi Pro

Note: The machine can be turned off only when the cooling fan of the print head stops running after the

print is completed. Turning off the power directly may clog the print head.

References: Please refer to CLEAN NOZZLE to remove the blocks out of the print head.

This section describes how to clean the feed module. After heavy use of printer, if feeding of material becomes difcult or impossible,

please follow these steps.

Preparation of Tools

B. Screwdriver (T10) for standard cleaning procedureA. Cleaning brush that comes with the printer

A. Quick Cleaning

CHANGE SPOOL LOAD FILAMENT UNLOAD FILAMENT

Use the “UNLOAD FILAMENT” function to

1 32

loosen and remove the lament.

Open the front cover to clean the feeding module on the left side of the printer.

Use the cleaning brush to scrub the gear. After removing the filament residues on the gear, you can insert the

lament back and enjoy printing.

B. Standard Cleaning

Please remove lament, extruder model and guide tube.

(Please refer to “Guide Tube and Extruder Module Removement” section of the "Accessories Installation” chapter and the "UNLOAD FILAMENT" section of the "UTILITIES" chapter.)

Use the screwdriver to remove the screw

(red circle) and open the top cover to see this part clearly.

Clean Instruction

Use the cleaning brush to scrub the gear;

after removing residues of lament on the gear, you

can insert the guide tube and put the cover back and then enjoy printing again.

P 18

da Vinci

Laser Engraving Module

Laser engraver module must be purchased separately.Please read through this manual and all safety reminders carefully before using, operating, dismantling,replacing, or removing this product. Please also comply with relevant safety reminders and instructions.

●

Product Overview

Jr. WiFi Pro

Heating bus slot

●

Recommended laser engraving material:

Paper ◆Cardboard ◆Leather ◆Wood ◆Plastic

◆

Note: Avoid using materials that are light colored, white, or have glossy surfaces for laser engraving.

Achieve the best engraving results with gray colored or dark colored materials. Plastic materials (such as PP / ABS / PE) may be engraved. However, please avoid using materials that are transparent, white, or lightly colored. The engraving module is only capable of engraving planar objects. The target should thus be

placed atly on the panel. Avoid engraving warped or curved objects that are not completely at.

Engraver head

Fan

●

Replace and Installing the laser engraving module:

Before replacing the extruder module with the laser engraving module, check if there are remaining laments in the nozzle and remove them accordingly. After removing the lament, please select [CHANGE NOZZLE].

Wait for the panel to display the message that allows you to switch off the power to replace the printing module.

◆

To release the extruder:

1.Press the white button at the back of the extruder to release it. 2.Lightly press the spring around the feed hole

and remove the lament guide tube. Press on the harness chips and disconnect the cable.

Installing the laser engraving module:

1.Connect the at cable to the laser engraving module. (Remind the at cable direction.)

2.Align the laser engraving module with the bracket and press it to x the holder.

Dismantling the laser engraving module:

1.Press the white button at the back of the laser engraving module to release it. 2.Detach the connected cables.

3.Complete dismantling and provide proper safekeeping of the laser engraving module.

●

Functions of the laser engraving software:

Once the laser engraver module has been installed, open the “XYZengraver” software. Select the laser engraving

function located at the upper right of the toolbar. Import the picture le to be engraved, edit and set laser engraving

effects, and initiate the engraving process.

Selective Module

P 19

CHANGE NOZZLE

da Vinci

Jr. WiFi Pro

Please operate the “UNLOAD FILAMENT” function and

1 3

remove lament spool in the printer.

Please select “CHANGE NOZZLE ”and smart extruder will

reposition to working position. Then, screen on the printer will show ”TURN OFF PROWER AND THEN CHANGE NOZZLE MODULE” and you can turn off power.

UTILITIES CALIBRATE BUILD SAMPLE CHANGE NOZZLE

TURN OFF POWER AND THEN CHANGE NOZZLE MODULE

Install Laser Engraving Module

1 2

Connect the flat cable to the laser engraver. (Remind the flat cable direction.)

Please remove extruder model and guide tube. (Please refer to“Guide Tube and Extruder Module Removement” section in the “Accessories Installation” chapter.)

Align the laser engraver with the bracket and press it to fix the holder.

NOTE : To disassemble the extruder module, gently press the sides of the at cable, remove the white at

cable, and then press the white quick release button.

Software Functions

Please select “XYZengraver” software and select the laser engraving function in the toolbar. At the same time, import the le

you want to edit, edit and set the laser engraving effect then operate the laser engraving.

For more detailed laser engraving instructions, please refer to the laser engraving manual.

(Ofcial website: www.xyzprinting.com)

Selective Module

P 20

●

Function Description

da Vinci

Select “Import” on the device to select the graphic le you wish to engrave.

Once basic editing has been completed, select this "Engrave" icon.

The setting of "Language" and "Automatic Feedback" (sending the set value of the engraving to XYZprinting).

Engraving samples.

Software version info.

Jr. WiFi Pro

●

Select "Edit". The software screen shall display the laser engraver settings.

The user may choose between Vector / Pixel engraving modes (default software setting is Vector mode). Set engraving speed, number of engraving layers, contour detection sensitivity, or color depth detection sensitivity.

●

Pause and cancel the laser sculpting

PAUSE:Select “PAUSE” to pause the laser engraving process.

RESUME:To cancel the pause and resume the printing, select “RESUME”.A screen will appear to con rm whether to resume the

engraving process. Select “YES” to continue the laser engraving process.

CANCEL: To cancel the laser engraving job, select “CANCEL”. A screen will appear to confirm whether to cancel the engraving process. Select “YES” to cancel the laser engraving process.

●

Laser Specication

Laser Wavelength

Laser Power for

Classi cation

Engraving area　 15 x 15 cm / 5.9" x 5.9" File Types JPG / PNG / GIF / BMP

Mode of Operation

450nm+5nm/-10nm InGaN

Class 3B

CW (Continuous Wave)

Laser Power

Beam Diameter ≦ 1mm

350mW ± 10%

For more details on laser engraving settings and methods,

please refer to the "Laser Engraving Module User Manual".

Selective Module

P 21

da Vinci

Jr. WiFi Pro

Wireless printing

This chapter introduces how to carry out the setting correctly and to operate the wireless printing function. To understand if your product is designed with wireless printing function, please refer to the table below.

●da Vinci 1.1 Plus ●da Vinci Jr 1.0w ●da Vinci Jr. WiFi Pro

Before setting up

The network printing function is only available when the printer and the computer are both connected to the same wireless network. Before connecting the printer, your wireless network settings need to be adjusted. For more information, refer to the instruction manual of your wireless router. The wireless network's channel width needs to be set to 20 MHz for the printer to connect to it wirelessly. Refer to the vendor instruction manual for more information. The printer supports WEP, WPA, and WPA2 security encryption standards. Wireless pass word information will be requested when setting up the printer connection.

Setting up WiFi

3D Printer WiFi Setting

Connect the printer to your computer with the USB cable, open "XYZprint" and turn on the printer.

Select the connected 3D Printer on Dashboard page.

Click the

Select the open the WiFi connection settings.

[XYZprint]

[SetUp] > [Wireless]

to open printer operating dashboard.

[WiFi setting]

In the

key in the related information to complete wireless connecting setup.

window, please follow the onscreen instruction to

Wi-Fi Setting

P 22

da Vinci

Jr. WiFi Pro

Once the connection method has been changed from USB to WiFi, you can unplug the USB cable and continue with the printing process.

Note:

• Name the printer and wireless network with the alphanumeric characters only.

• If no connection is detected within 90 seconds, the printer will time-out. If this is the case, check that the conguration process is

correct and try again.

• Conrm your wireless network's security key on the router's wireless settings page.

• The recommended wireless connection distance between your printer and the wireless networking device needs to be within 10 meters. The connection quality, will depend on the power of your networking device, and the environment you are connecting the two devices in. For more information, please refer to your networking device's instruction manual.

If you need to stop or change the wireless setting, please

[Connect to new network / Disconnect]

click

Wi-Fi Setting

P 23

Open Filament

da Vinci

Jr. WiFi Pro

If you’re using third party laments,

1 2 3

please secure the lament using

the holder.

Load the lament function of the printer function. When the panel displays:

"USE XYZPRINTING SPOOL? ", select "NO "> "APPLY SETTING " (and enter temperature settings).

UTILITIES CHANGE SPOOL HOME AXES JOG MODE

Adjust the nozzle temperature according to the

supplier’s recommendations. Use the left the digits. Use the up buttons to increase or lower the number.

【＜】

and right

【＜】

CHANGE SPOOL LOAD FILAMENT UNLOAD FILAMENT

buttons to select

【＞】

and down

Load the lament from the back

of the printer.

USE XYZPRINTING SPOOL? YES NO

Once temperature settings have been completed,

press "OK" to complete the settings.

【＜】

In the printer, insert the lament into the

feed port. Open the release arm so that

the front tip of the lament can be

properly inserted into the feed module.

USER FILAMENT APPLY SETTING

--------------------------

NOZZLE 200 C

NOZZLE 2 [ 1 ] 0 C

[ < ] [ > ] , OR [ OK ]

The recommended printing temperature range is 190

to 240 C. The screen would display a temperature range reminder if the temperature settings exceed this recommended range.

INVALID VALUE MIN 190 C MAX 240 C [ OK ] TO RETURN

NOZZLE 2 [ 1 ] 0 C

[ < ] [ > ] , OR [ OK ]

The user may go to SETTING

>USER FILAMENT >NOZZLE to set the nozzle temperature.

USER FILAMENT NOZZLE 210 C UNLOAD 190 C

NOZZLE 2 [ 1 ] 0 C [ < ] , [ > ] [ OK ]

TO CONTINUE

REMARK

* Hang the spool on the lament spool holder prepared by yourself, we recommend use the support bracket to avoid

collapsing when printing.

* Print quality cannot be guaranteed if laments from other brands are used instead.

* The warranty does not cover stuck laments, product failure, damage or defects resulting from the use of other brand’s la-

ment or 3rd party slicing software.

OPEN FILAMENT

P 24

da Vinci

Jr. WiFi Pro

da Vinci Junior Wi Pro 3D

Model Name

Dimensions

Weight

Display

Language

Connection method

Print Technology

Build Volume

Print resolution (Layer Hight)

Print module

Nozzle diameter

Filament diameter

Files supported

Operating system

Printer

da Vinci Jr. WiFi Pro 3D Printer

16.54 x 16.93 x 14.96 inches （420 x 430 x 380 mm

26.46 lbs (12kg)

2.6” FSTN LCM

Multi language

USB Wire / SD Card / Wi-Fi 802.11 b/g/n

FFF (Fused Filament Fabrication)

150 x150 x150 mm

20 - 400 microns

Single Nozzle

0.4mm(Stainless Steel) / 0.4mm (HS Nozzle) (Optional)

1.75 mm

.stl , XYZ Format (.3w),windows(.3mf), G-code

Windows 7 - 8 above (for PC)

Mac OSX 10.10 64-bit above (for Mac)

）

Hardware requirement

X86 64-bit compatible PCs with 4GB+ DRAM (for PC)

X86 64-bit compatible Macs with 4GB+ DRAM (for Mac)

Environmentally friendly materials-PLA

PLA laments are made using polymerized lactic acid, which is extracted from corn, sugarcane or other sugar-containing crops, and

is regarded as the most environmentally friendly 3D printing material. Unwanted PLA printed objects can be simply discarded in the soil where it will naturally decompose. PLA materials printed at low temperatures are not only suitable for family settings, its bright texture also makes it a favorite amongst our clients. You may observe the characteristics of PLA during printing.

• Despite their harmlessness, PLA placed in an environment or water bath exceeding 50 oC (122 oF) will soften and deform.

• Hence, overly humid areas are not suitable storage environments for PLA. We recommend properly sealing and stashing away

unused PLA laments.

• A sugary smell is often generated when printing with PLA laments, giving yet another attractive feature.

Specications

P 25

da Vinci

The troubleshooting instruction may guide you to x the problem. If any error persists, please contact customer service.

When an error occurs, please refer to the service code shown on the printer and/or in the software, and check the suggestions below for troubleshooting. Technical Support Website: http://support.xyzprinting.com Email: US - supportus@xyzprinting.com EU - supporteu@xyzprinting.com Other regions - support@xyzprinting.com

Jr. WiFi Pro

Please retain all original packaging material when shipping your product for warranty purposes. Shipping without original packaging materials may cause product damaged during the shipment and may cause chargeable service fees.

Service Code

0 0 0 7

0 0 0 8

0 0 1 1

0 0 1 4

0 0 1 6

0 0 2 8

0 0 2 9

0 0 3 0

0 0 3 1

0 0 3 2

0 0 4 0

0 0 5 0

0 0 5 1

Symptom

Cartridge chip error

Extruder heating problem

Cartridge installed incorrect

Cartridge not installed

Cartridge chip error

X-axis movement abnormalities

Y-axis movement abnormalities

Z-axis movement abnormalities

SD card error

Internal communication error

Action

Reinstall the cartridge or change a new cartridge.

Check connections, reboot the printer.

Install/reinstall cartridge.

Replace cartridge 1 before printing.

Check motor/sensor connections.Check sensor position.

Check SD card installation

Reboot the printer.

0 0 5 2

0 0 5 7

0 2 0 1

0 2 0 B

0 2 0 C

0 2 0 D

Extruder storage error

Unable to detect extruder

Computer and printer connection error

SD card error

File format is not support

Replace the extruder.

Please reinstall the extruder and reconnect the at cable, then restart the printer.

Please reinstall the extruder and reconnect the at cable,

then restart the printer.

Check SD card installation.

Please use correct print model.

Support Details

P 26

Other InformationOther Information

da Vinci

Jr. WiFi Pro

Error message

The printer is handling other task Try again after all tasks are completed. Also check the information shown on printer display.

Unable to update printer rmware Check Internet connectivity / Update rmware again later.

Filament 1 jammed Unload and reload cartridge 1 and clean the nozzle.

Filament 1 loading problem Unload and reload cartridge 1.

Filament 1 installation problem Reinstall the cartridge 1 or change a new cartridge.

Top cover open Close the top cover.

Filament 1 level low: 30m left Replace cartridge 1 when necessary.

Filament 1 level low: 5m left Replace cartridge 1 immediately.

1. This product is guaranteed for specic period from the purchase date against any breakdown within the scope of

proper and reasonable usage of their product as dened by XYZ printing.

Presentation of warranty card with the product will ensure free service and repair of inherent faults in the product within the warranty period. However, the following items are separate and dealt with under conditions of other related warranty services:

● Printing modules / printing platforms / motor modules

● Attached consumables (including housing, packing materials, power cords, USB cables, coil consumables, user

manuals and software CD's): no warranty is given.

2. To protect your right and interests, please request that the dealer ll in the product information and purchase date on the product warranty card, and also make sure that they afx their ofcial seal.

3. Please keep this warranty card in a safe place because if it is lost or destroyed a new one will not be issued. Make sure to present the card if you require any repairs, service or maintenance to the product during the warranty period.

4. XYZprinting may levy charges under any of the following circumstances:

● Man-made damages: In the case of damage to the product caused by incorrect use, wrong installation,

abnormal wear, physical damage or deformation caused by falls or blows, burnt circuits resulting from actions form the user, broken or bent interface or pins or any other physical damage to the product caused by misuse.

● Incompatibility issues: anything unconnected with product malfunctions such as conict with electronic

equipment, expectation of use, noise of operation, speed, discomfort or heat.

● Damage caused by force Majeure (such as lightning strike, re, earthquake, oods, civil disturbance or war or

any other event beyond human control).

● Any request of warranty service after expiration of the warranty period.

Action

If you need warranty service, please contact the original dealer or send a ticket via XYZprinting website. If you need more information about our warranty services, please log in to www.xyzprinting.com, select "support (product

support)" where you will nd complete details of all the warranty conditions.

Term of Service

P 27

da Vinci

Jr. WiFi Pro

Other Information

Federal Communications Commission (FCC) Statement

You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user’s

authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

XYZprinting is not responsible for any radio or television interference caused by using other than recommended cables and

connectors or by unauthorized changes or modications to this equipment. Unauthorized changes or modications could void the

user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement.

Warning

● Do not let children operate this device without adult supervision. Electric shock hazard. Moving pars can

cause serious injury.

● Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm and/or

injury. Printer may fall or tumble causing harm and/or injury.

● Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to printer

damage or safety risks.

● Do not use ammable chemicals or alcohol wipes to clean this device.

● Do not disassemble or replace the printer cover with none XYZprinter covers.

● Do not touch heated surfaces during or after operation. Heated surfaces can cause severe burns.

● Insert and secure the power cord rmly for proper usage and to avoid potential electricity and re dangers.

● Do not attempt to service the printer beyond the instructions specied in this document. In the case of

irrecoverable problem, contact XYZprinting service center or your sales representative.

Warning!

P 28

XYZ Printing da Vinci Jr. WiFi Pro User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual