xyzprinting da Vinci 1.0 Professional User Manual

Download

da Vinci 1.0 Pro User Manual

Product Safety

Product Description

Printer screen menu, functions and messages

Functional operations and descriptions

Support Details

ENG

WARNING: This 3D Printer - when used with a styrene filament (ABS / HIPS / or PC-ABS) can expose you to chemicals, including Styrene, which is known to the State of California to cause cancer. For more information, visit www.p65warnings.ca.gov

Product Model: da Vinci 1.0 Professional

da Vinci 1.0 Pro

The purpose of this user manual is to help users understand and use the da Vinci 1.0 Professional 3D printer correctly. It contains the operating instructions, maintenance information and application skills of the da Vinci 1.0 Professional 3D printer.

For the latest information about da Vinci 1.0 Professional 3D printer and XYZprinting products, please contact your sales representative or visit XYZprinting website: http://www.xyzprinting.com

Product Safety

●

Safety and Compliance

Before you use, operate the product, change or remove any parts, components or materials of the product, or maintain the printer, please ensure that you carefully read this User Manual and the safety instructions described below, and strictly follow the instructions of such safety information.

The following warnings and attention notices are a best effort attempt to cover all scenarios; unfortunately it is not possible to do so in the case of performing maintenance procedures that are not described in this manual the burden of safety falls to the customer side.

Important Safety Information

●

Do not place the printer in humid or dusty environment such as bathrooms and high traffic areas.

●

Do not place the printer on an unbalanced or unstable surface. Printer may fall or tumble causing harm and /or injury.

●

Do not let children operate this device without adult supervision. Moving parts can cause serious injury.

●

Please use the grounded power cord supplied with the printer to prevent a possible electrical shock.

●

Insert and secure the power cord firmly for proper usage and to avoid potential electricity and fire dangers.

●

Do not disassemble or replace the printer cover with none XYZprinting covers.

●

Do not place any objects on top of the printer. Liquids and objects that fall into the printer can lead to printer damage or safety risks.

●

Do not use flammable chemicals or alcohol wipes to clean this device.

●

The process of heating the filament will produce a light non-toxic odor. Having a well ventilated area will ensure a more comfortable

●

environment.

Make sure to set the power switch to the off position and remove the power cord before transporting the device.

●

Do not touch the interior of the print while printing as it may be hot and include moving parts.

●

Some components of the printer are moving during operation. Do not attempt to touch or change anything inside before power off

●

the printer.

Do not attempt to service the printer beyond the instructions specified in this document. In the case of irrecoverable problem,

●

contact XYZprinting service center or your sales representative.

●

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

P 2 V2

da Vinci 1.0 Pro

Product Description

Product Overview

Cartridge Slot

Auto Feed System

DA VINCI 1.0 Pro. 1 UTILITIES SETTINGS INFO

Function Key Control Panel

Extruder Module

USB Port

Print Bed

Power Switch

Power Socket

Levelness of the Print Bed may be susceptible to vibration during transportation, which may influence print quality.

Please adjust the bed with reference to「Print Bed Adjustment」 before printing.

Accessory Checklist

Maintenance Tools

Quick Guide,

．

Warranty Card

Software CD

．

P 3 V2

Filament

．

Cartridge

Side Cover

．

Plate x2

Cartridge

．

Locker

Bed Tape X 3 pcs

．

The bed tape is reusable and it

（

can be replaced when it’s worn.

．

）

USB Cable

Power Cord

．Cleaning

Brush

Scraper

．

Feeding Path

．

Cleaning Wire

Cleaning wire x 5

．

．Copper

Brush

da Vinci 1.0 Pro

Product Description

Open the box

Open the box and

remove the accessories and the cushion

Tape x2

Packing support x2

Open the upper cover and remove

fixities listed above

Note: Please removal all fixed materials before turning on the printer to prevent the machine from damage

Use the grip to take off the machine

Cable tie x1

Remove all fixing tapes and

the packing bag

Remove 2 foams at the front of the cardboard

Tape x2

Packing support x2

Pay attention particularly to actual paperboard removal of the fixities listed above

Be sure to remove the fixing foam from

the axis

Cable tie x1

Remove the fixing

6 7

styrofoam beside the bed

Be sure to remove the cable tie as illustrated above

Important Safety Notes

Do not use the printer in dust rich, highly humid or outdoor environments.

•

Do not use the printer on a soft or tilt table to prevent the machine from falling, which may result in damage or personal injury.

•

Do not put your hand into the machine during operation to avoid collision risk due to movement of the machine or to avoid burn

•

due to high temperature.

Do not cut this

white cable tie.

Remove fixing paperboard

Remove bottom screw and the

fixing screw on the bottom of the bed

Insert the bundled software CD into the computer and install the software according to instruction

Use the USB cable to connect the printer to PC. Connect the power cord to the printer then turn on the power switch

P 4 V2

da Vinci 1.0 Pro

Notes and Description for Use of Maintenance Tools

The following tools can be used only in an environment with guidance or monitoring by adult. Do not allow

•

children to obtain maintenance tools in unfamiliar situations in order to avoid danger. Please make sure to maintain the printer as the bed is cooled.

•

After print is finished and the print bed is cooled to room temperature, the printing object may be taken off with Scraper.

•

• In order to prevent print quality from impact due to residual and accumulated filament, which results in poor discharge, after long-term use of print nozzle, it is recommended to enable the "CLEAN NOZZLE" (nozzle cleaning) function of the printer every 25 hours of print to clear residuals with nozzle cleaning wire.or feeding path cleaning wire. (Filament should be unloaded from the extruder before cleaning the feeding path.)

Filament residuals produced during print may also attach onto nozzle and gear of print module to influence print

•

quality, printer operation, as well as measurement result of bed. For such situation, please use cooper brush to clean the print module.

●

Maintenance and Service

Keep original packaging material in the event of sending your unit back for repair during the warranty period. If other packing materials are used instead, the print-er may be damaged during the transportation process. In such situation, the XYZprinting the right to charge repair fee.

Display and Control Panel

Pro. 1 UTILITIES SETTINGS INFO

Direction Up / Decrease the value

Back to pervious menu / Adjust the value /Move to the preview item

Go to the next menu / Adjust the value /Move to the next item

Direction Down / Increase the value

P 5 V2

Select / Confirm setting / Confirm and exit

Home menu

da Vinci 1.0 Pro

Printer screen menu,

functions and messages

UTILITIES

Installation and removal of filament, calibration of the printing bed and printing settings, including:

◆ CHANGE CART ◆ HOME AXES ◆ Z OFFSET ◆ JOG MODE

◆ CALIBRATE ◆ BUILD SAMPLE ◆ CLEAN NOZZLE

Pro. 1 UTILITIES SETTINGS INFO

CHANGE CART

Load, unload filament and view the information about the filament. Using XYZprinting

filament to ensure smooth operation of the machine is recommended.

UTILITIES CHANGE CART HOME AXES Z OFFSET

CHANGE CARTRIDGE LOAD FILAMENT UNLOAD FILAMENT

Refer to P.13 for Load filament

UNLOAD FILAMENT

●

In unloading lament, activating the lament unloading function on the control panel of the printer.

Wait for the extruder to heat up to operating temperature and unload the lament.

As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and

pull out the lament.

HOME AXES

Use the function to move the extruder to upper right corner of printing space and the print bed to the top. Extruder homing:

UTILITIES CHANGE CART HOME AXES Z OFFSET

Select “YES” to return the extruder to the preset position.

HOME AXES ARE YOU SURE? NO YES

Z OFFSET

Use the function to adjust the print bed upwards and downwards, and the printing distance between the bed and printing module. The function will also record the setting value.

UTILITIES HOME AXES > Z OFFSET JOG MODE

P 6 V2

PREPARING PLEASE WAIT

[ ^ ] Z OFFSET 0.00 mm [ v ] [OK] TO RETURN

da Vinci 1.0 Pro

Manually adjust the movement of X/Y/Z Axis for printer maintenance.

How to move the extruder:

JOG MODE

UTILITIES Z OFFSET JOG MODE CALIBRATE

JOG MODE X-AXIS Y-AXIS Z-AXIS

X-AXIS [ OK ] >> EXIT

[－ ] ▲ [ ■001mm ] ▲ [ ＋] 010mm

020mm

Select a target to move:

●

Select “X-AXIS” to move extruder rightwards and leftwards

●

Select “Y-AXIS” to move extruder forwards and backwards

●

Select “Z-AXIS” to move the print bed ( Conduct“Home AXES”function first and then to adjust “Z-AXIS” print bed. )

Adjust the distance

Use “UP” and “DOWN” buttons to select the moving distance. Then, select “-“ based on the desired distance

●

and press the “TO THE LEFT” button or select “+” and press the “TO THE RIGHT” button to adjust the moving

distance.

●

Press the “TO THE LEFT” button: The extruder will be adjusted rightwards/backwards or closer to the print bed.

●

Press the “TO THERIGHT” button: The extruder will be adjusted leftwards/forwards or away from the print bed.

CALIBRATE

Use the function to adjust the print bed and make adjustment based on the reference value. The printing quality will be affected by the levelness of the print bed. If you want to confirm the levelness of the print bed, turn on the function to measure and check recommended adjustment.

UTILITIES JOG MODE CALIBRATE BUILD SAMPLE

CALIBRATE ARE YOU SURE? NO YES

Refer to P.15 for CALIBRATE

BUILD SAMPLE

3 built-in samples are stored in the printer. You can learn to use the printer through building samples.

UTILITIES CALIBRATE BUILD SAMPLE CHANGE NOZZLE

Stick the bed tape onto the print bed before printing

P 7 V2

da Vinci 1.0 Pro

Select the built-in sample to be printed

BUILD SAMPLE DEMO KEY CHAIN HEART

Select "YES" and press "OK"

KEY CHAIN START BUILDING? NO YES

After completion of print, take off the print product.The print bed patch is reusable,replace the patch when it is worn out.

Note:

Stick the bed tape onto the print bed before printing or apply some glue stick on the bed tape for objects with special structures to make the tape more adhesive and the object more difficult to come loose.

CHANGE NOZZLE

UTILTIES BUILD SAMPLE > CHANGE NOZZLE CLEAN NOZZLE

CHANGE NOZZLE ARE YOU SURE? NO YES

TURN OFF POWER AND THEN CHANGE NOZZLE MODULE

Turn off the printer after the printing device and print bed automatically move to their positions and change the printing module.

Levelness of the Print Bed may be susceptible to vibration during transportation, which may

influence print quality. Please adjust the bed with reference to「Print Bed Adjustment」 before printing Insert Page information.(P.15)

P 8 V2

da Vinci 1.0 Pro

Printer screen menu, functions and messages

UTILITIES BUILD SAMPLE

Printer Maintenance

● UTILITIES > CLEAN NOZZLE

Regular cleaning of the print nozzle facilitates to not only extending service life of the printer, but also improves print quality. Enable "CLEAN NOZZLE" (nozzle cleaning) function. Clean the nozzle after the nozzle is heated up, the bed has been lowered and the extruder has been moved to the front end, and "READY FOR CLEAN" is displayed on screen.

Clean the detecting pin with Copper Brush

Filament residues produced during printing may become attached to the nozzle and gear of print module to

influence print quality, operation of the printer, and measurement result of the bed. If such a situation is encountered, please use a copper brush to clean the print module by brushing off residue and dirt on the detecting pin .

CHANGE NOZZLE CLEAN NOZZLE

Clean Nozzle with Nozzle Cleaning Wire

With increased print frequency, the carbon accumulation and dirt in the nozzle might affect print quality. Thus, we recommend you to clean nozzle for every 25

hours of print. Please clamp the nozzle cleaning wire

with needle-nosed pliers to insert it into the opening of the nozzle carefully for cleaning. (Filament should be unloaded from the extruder before cleaning the feeding path.)

Wipe Measurement Points

After the bed is lowered, please switch off power to cool the bed, followed by wiping 4 measurement points with damp cloth

P 9 V2

da Vinci 1.0 Pro

SETTINGS

The basic settings of the machine, functions, selection and adjustment of printing values, including:

◆ USER FILAMENT ◆ BUZZER ◆ AUTO HEAT ◆ LANGUAGE ◆ ENERGY SAVE ◆ RESTORE DEFAULT

Pro. 1 UTILITIES SETTINGS INFO

USER FILAMENT

The user can customize the temperature of the extruder, print bed and unload filament based on the requirements of filament and designing objects.

NOZZLE Print Bed Filament Unloading

USER FILAMENT APPLY SETTING

----------------------->NOZZLE: 210

Refer to P.14 for Temperature Setting

USER FILAMENT NOZZLE: 210 °C > HEATBED: ON

℃

BED: 040 °C ℃

USER FILAMENT HEATBED ON BED 040 °C > UNLOAD 170 °C

BUZZER

When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or issue is detected.

SETTINGS USER FILAMENT BUZZER ON AUTO HEAT OFF

Buzzer is turned on by default, you can select “OFF” and press “OK” to change the setting.

●

BUZZER OFF ON

AUTO HEAT

SETTINGS BUZZER ON AUTO HEAT OFF LANGUAGE

●

“AUTO HEAT” is o󰀨 by default. you can select ”ON” and “OK” to change the setting.

●

When “AUTO HEAT” is turned on, the printer heats up the extruder and the print bed after powered on. This helps to shorten the idle time that is necessary to heat up the printer before

printing.

AUTO HEAT [OFF] OFF ON

LANGUAGE

We suggest setting the language shown on the printer screen before use. The user can switch among

English, Japanese, French, German, Italian and Spanish. English is the preset language. For other languages: Use “UP” and “DOWN” buttons to select the desired language and press “OK”

to change setting.

SETTINGS AUTO HEAT OFF LANGUAGE EN ENERGY SAVE 03M

LANGUAGE ENGLISH

ニホンゴ

FRANCAIS

P 10 V2

da Vinci 1.0 Pro

ENERGY SAVE

LED luminaries are installed in the printing chamber. To save energy consumed, the lighting will go off after

idling for 3 minutes (shown as 03M on the display) by default.

SETTINGS LANGUAGE EN ENERGY SAVE 03M RESTORE DEFAULT

ENERGY SAVE [ 03M ] OFF 03M 06M

Select “06M” (for auto off after 6 minutes) or “OFF” (for never turn off the LED) and press “OK” to change

the setting.

RESTORE DEFAULT

All settings can be reset to factory default with a few clicks.

SETTINGS LANGUAGE EN ENERGY SAVE 03M RESTORE DEFAULT

RESTORE DEFAULT ARE YOU SURE? NO YES

Select "YES" and press "OK" to reset all settings.

INFO

The firmware and printer statistical information, including:

◆ STATISTICS ◆ SYSTEM VERSION ◆ CARTRIDGE STATS

◆ WIFI INFO ◆ NOZZLE INFO ◆ HELP

Pro. 1 SETTINGS INFO MONITOR MODE

STATISTICS

Show the accumulated printing time and the last printing time. If you want to exit, press “OK”.

INFO STATISTICS SYSTEM VERSION CARTRIDGE STATS

STATISTICS LIFE TIME 00006H LAST TIME 00H34m [OK] TO RETURN

SYSTEM VERSION

Show the version information of the current firmware. We suggest upgrading printer firmware to the latest

version to ensure steady quality. To check whether latest version of firmware is available, use XYZware. If you want to exit, press “OK”.

INFO STATISTICS SYSTEM VERSION CARTRIDGE STATS

P 11 V2

SYSTEM VERION

0.0.4 [ OK] TO RETURN

da Vinci 1.0 Pro

CARTRIDGE STATS

Show the remaining amount of filament (such as “REMAINING” for length information), volume of spool, color of filament and material information. Press to skip the page and press “OK” to exit.

INFO SYSTEM VERSION CARTRIDGE STATS WIFI INFO

CARTRIDGE STATS REMAINING 240m CAPACITY 240m [ DOWN] NEXT PAGE

COLOR RED

[ DOWN] NEXT PAGE

MATERIAL ABS

[ OK] TO RETURN

WIFI INFO

It shows the current situation of the WiFi connection of the printer.

Refer to P.17 for "XYZware Pro" WiFi Setting

INFO CARTRIDGE STATS WIFI INFO NOZZLE INFO

WIFI INFO NO CONNECTION

[ OK] TO RETURN

If there is connection, SSID of connected Wi-Fi, IP address, name of the connected printer and connection version will be shown. Press "OK" key.

WIFI (SSID) XYZ

[ DOWN] NEXT PAGE

IP ADDRESS

192.168.40.38

[ DOWN] NEXT PAGE

PRINTER NAME xyzpriting

[ DOWN] NEXT PAGE

WIRELESS VER.

5.1.5

[ OK] TO RETURN

NOZZLE INFO

It shows the information of current installed module.

Extruder Module message Laser engraver Module message (optional module)

TYPE EXTRUDER DIAMETER 0.4mm LIFETIME 00001h [ OK ] TO RETURN

TYPE ENGRAVIER DIAMETER N/A LIFETIME 00060h [ OK ] TO RETURN

HELP

You may go to the website for the latest information, product documents, tutorial video and more. If you want to exit, press OK.

INFO CARTRIDGE STATS WIFO INFO HELP

HELP www.xyzprinting.com

[ OK] TO RETURN

MONITOR MODE

This option can monitor temperature conditions, including:

MONITOR MODE EXTRUDER 020 ℃ PLATFORM 026 ℃ [OK] TO RETURN

P 12 V2

da Vinci 1.0 Pro

Functional operations and descriptions

Install and Load Filament

UTILITIES > CHANGE CART > LOAD FILAMENT

● Install Filament Cartridge from XYZprinting

◆ Remove the filament stopper and tape and

install the filament cartridge into the empty slot.

Insert filament into the guide hole until the printer

◆

starts to load filament. Press the release arm to open the feeding path

◆

while inserting the filament Then, activate LOAD FILAMENT function

◆

on the printer

*Recommend using a clips and other tools to cut the tips of the filaments to generate a tapered tip of 45 degrees, and to straighten the filaments to facilitate the filament loading process.

◆ Place and push to click the

cartridge locker

Activate LOAD FILAMENT function on the control panel

● Install Compatible filament

* Print quality cannot be guaranteed if filaments from other

brands are used instead.

* The warranty does not cover stuck filaments, product failure,

damage, or defects resulting from the use of filaments from other brands or other human errors.

Hang the spool on the filament spool

holder prepared by yourself

Remove the cartridge from the cartridge

◆

slot if any to use your own lament

CHANGE CARTRIDGE >LOAD FILAMENT

● To use XYZprinting filament and apply the

recommended temperature settings,select "YES"

USE XYZPRINTING

CARTRIDGE NOW?

> YES

Wait for the extruder to heat up

As the temperature reaches op-

erating setting the printer loads automatically the filament, and filament loading is completed

Check if the filament flows out from the nozzle. If the filament has

flowed out, please press “OK” to

complete the loading process

◆ Filament loading is completed

Select "NO" if filaments of other brands are used.

●

USE XYZPRINTING

CARTRIDGE NOW? > NO

USER FILAMENT

APPLY SETTING

>NOZZLE: 210 ℃

※ To specify your own temperature settings:

Select the printer component using the new settings. To set the heating temperature, please refer to instructions provided for "Temperature Settings" function Select "APPLY SETTING" to start applying your specified temperature settings. The process on the left will start and the printing component will start to heat up.

※ To use pre-defined temperature settings:

Select "APPLY SETTING" directly to enter the workflow shown on the left.

Remarks:

The temperature setting in this procedure is applicable only to 3D Builder application software developed by Microsoft. For more information about 3D Builder, please visit the Microsoft website

P 13 V2

da Vinci 1.0 Pro

Functional operations and descriptions

Unloading Filament

● UTILITIES > CHANGE CART > UNLOAD FILAMENT

In unloading filament, activating the filament unloading function on the control panel of the printer

1. Wait for the extruder to heat up to operating temperature and unload the filament.

2. As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and pull out the filament.

Temperature Setting

● SETTINGS > USER FILAMENT

The user may customize nozzle temperature, print bed temperature and filament unloading temperature in accordance with requirements of different filaments and design objects:

Select the item for temperature setting

Nozzle

Press "OK" to enter temperature setting for nozzle

Temperature Customization:

● Use "left key", "right key" to select the digit (single, tens, hundreds) for the temperature to be adjusted.

● Use "up key", "down key" to adjust the value.. The up key is for increasing value, and the down key is for

decreasing value. Press "OK" key to apply setting.

● If your customized temperature exceeds allowable setting range, press "OK" and a setting range alert

will be displayed.

● Once parameter settings are complete, return to the previous page and select “APPLY SETTING” to

save and apply the settings that you have specified.

Print Bed

USER FILAMENT NOZZLE: 210 >HEATBED: ON BED: 040 ℃

The HEATBED will heat up by default. To adjust the operating temperature of the print bed, select BED and press

“OK”.

℃

HEATBED: [ON] OFF > ON

Select “ON” or “OFF”

to turn the print bed’s heating function on or off. Once turned on the heating func-

tion, press “OK” to adjust

the temperature setting for the print bed

Filament Unloading

USER FILAMENT HEATBED ON BED 040 > UNLOAD 170 ℃

Press "OK" to enter temperature setting for filament unloading

℃

Constraints of Customized Temperature Range

NOZZLE

Warming up of the nozzle of the extruder in feeding and printing: 170℃ ~ 240℃

BED(ON)

UNLOAD

Remarks:

● If the temperature for print bed is specified as [OFF], room temperature printing will be enabled and the print bed will not

be heated.

● Excessively low extruder temperature may result in poor filament feeding, result in poor filament feeding that prevents

proper extrusion of the filament through the nozzle. Hence, please adjust the operating temperature of the extruder first.

P 14 V2

The temperature setting in this procedure is applicable only to 3D Builder application software developed by Microsoft. For more information about 3D Builder, please visit the Microsoft website

Temperature elevation range of the print bed: 41℃ ~90℃

Temperature elevation range of the extruder in unloading:

170℃ ~240℃

da Vinci 1.0 Pro

Functional operations and descriptions

Print Bed Adjustment

Before first printing, please calibrate the bed to guarantee an appropriate levelness of the bed for printing.

● UTILITIES > CALIBRATE

After the printer is heated up to an appropriate temperature, the distances between measurement points on bed edge1, 2, 3,

and probes are measured automatically to

determine levelness of the bed

If the automatic detection function determines that there is no need to

●

adjust levelness of the bed, "PERFECT" will be displayed on screen. At this moment, press "NO" to exit. If you see “UNLEVEL BED” in the detection results, you will have to adjust the bed levelness. A prompt window for initiating the calibration process should appear.

● Calibration Instruction

3 STEP

4 STEP

Description for Instruction on Screen TURN LEFT KNOB BACKWARDS - Turn the left knob backwards

FORWARDS - Turn the left knob forwards

LEFT KNOB

After executing calibration of platform, please make Z-OFFSET vertical calibration, in order to guarantee that the nozzle can print material on platform smoothly.

1. Move the extruder to the center of platform. The distance between nozzle and platform is suggested to enable two piece of A4 paper to be pulled out smoothly.

2. Distance between nozzle and platform is changed positively with the value.

3. After adjustment, press OK to save settings.

2 STEP

(There are three white 4-step knobs

under the bed. Each step of turning

indicates 90 degrees of rotation and

4 steps of flick indicate a complete

circle of rotation of the knob.)

Instruction for Direction

Description for Instruction on Screen TURN RIGHT KNOB BACKWARDS - Turn the right knob backwards

FORWARDS - Turn the right knob for wards

RIGHT KNOB

Knob Location and Adjustment Direction

Adjustment:

Description for Instruction on Screen TURN FRONT KNOB TO THE RIGHT - Turn the front knob rightwards

TO THE LEFT - Turn the front knob leftwards

There are three white 4-step knobs under the bed. Each step of turning indicates 90 degrees of rotation, and 4 steps of flick indicate a complete circle of rotation of the knob as shown in

the messages on screen. Press “OK" key to continue viewing

adjustment instructions.

Knobs corresponding to this procedure Turning direction Number of turning steps (each step indicates 1 tick/90 degrees of rotation) After flicking knob in accordance with prompt, press "OK" key to continue

FRONT KNOB

LEFT KNOB

UTILITIES CHANGE CART HOME AXES Z OFFSET

FRONT KNOB

1 STEP

BACKWARDSBACKWARDS

RIGHT KNOB

FORWARDSFORWARDS

TO THE RIGHTTO THE LEFT

Calibration fail will be caused, in case of any smudginess at the measurement points on platform, or too long or short of the distance between platform and nozzle. Please adjust as follows: 1. clean platform and nozzle 2. adjust the detection distance between platform and nozzle .

Please execute “CALIBRATION” again after each operation step is completed, until the detection result displays “perfect”.

*Please refer to the tutorial video provided on the official website, for detail operation process of calibration.

P 15 V2

da Vinci 1.0 Pro

Transfer print file through computer software "XYZware Pro"

Connect the printer and the computer with USB cable and install "XYZware Pro" in the computer to transfer print file.

Import .stl, .3w files

Convert to .3w file

DDEEF

Save .stl file

Set print preference, transfer print file

Set software display language, preview color

Query, update software and firmware versions, open link to official website

Adjust display scale

Switch preview angle rapidly

Move location of the model

Change angle of the model

Adjust size of the model

Display information about the model

Delete the model from the virtual platform

Check printer temperature, filament information and print progress

“XYZware Pro” may run in Windows 7 and above and Mac OS 10.8 and above operating systems. You may install it from the bundled CD or download the installation file from the XYZprinting official website.

● Basic Operation Flow

After opening the software, click "Import" to select the model file you desire to print and load it. The user may change relevant settings through “File Conversion” function to satisfy adjustment of print speed and effect. After setting up the model at the desired size, location and placement, you can also adjust the

printing preferences, such as print speed and layer height by clicking the “Export” icon. Click the “Export” button to slice the file. When the model is sliced, click on the “Print” button to send the file for printing.

For more information on software update, operation instructions and technical supports, please visit the XYZprinting official website: http://www.xyzprinting.com/

P 16 V2

da Vinci 1.0 Pro

WiFi Connection

The printer supports Wi-Fi connection printing.

Install “XYZware Pro”, and activate Wi-Fi setting of the printer in accordance with

the following instruction to switch the printer to wireless control mode, such that the print file may be subsequently transferred wirelessly.

● Preparation Prior to Setting

The network print function is provided mainly for Intranet application. Please set the printer and the computer in the same domain, that is, link them to the same wireless base station (Access Point)

Before linking the printer, settings would be adjusted for the connected wireless base station. For detailed setting way, please refer to the operation instruction of the product or original vendor relevant information. Channel Width may be set to 20 MHz for use of wireless print function. Please refer to original vendor operat-

3. ing instruction of wireless base station to understand adjustment way Please keep the wireless network function in the on state

4. The machine supports the following link security modes. Public key information would be requested to enter in

5. setting printer connection

WEP ◆WPA ◆WPA 2

◆

(This image is for reference only)

● Wi-Fi Settings

Please use a USB cable to link the computer and the

printer, and open XYZware Pro.

Click the "Printer Monitoring" function icon on the lower right corner on the screen, open "Printer Monitoring"

window, click "My Printer" > "Scan" to enter the page

for printer search, and click "Wireless Network Settings" to enter the page for wireless print settings.

2-2 2-3

2-4 2-5

2-1

P 17 V2

da Vinci 1.0 Pro

WiFi Connection

Please enter printer name (either English or numeric name), press "Scan" function to obtain wireless base station information with dropdown menu, and select the name of the wireless network you desire to connect.

After successful connection, Wi-Fi name will be displayed on screen of the printer.

WIRELESS CONNECTING

PLEASE WAIT

At this moment, USB cable may be taken off to continue

the print process.

If connection is to be disconnected, please connect USB back between the computer and the printer, and open XYZware Pro again.

Product Specification

Print Technology　　 Fuse Filament Fabrication (FFF) Weight　　　 26 KG

Print Dimension　　　20 x 20 x 20 cm Print Material　 ABS / PLA

Print Resolution　　 0.1 / 0.2 / 0.3 / 0.4 mm Filament Diameter 1.75 mm

Display Screen　　　 2.6 inch LCM Nozzle Diameter　 0.4 mm

Connection

Method　　　　 USB 2.0 / WiFi

Print Software　　　 XYZware Pro

P 18 V2

Operating Win 7 and above

System　　 Mac OSX 10.8 and above

File Format　　 3w / stl

da Vinci 1.0 Pro

Print From A Mobile Application

1.The mobile device needs to support wireless printing.

2.Install XYZprinting App from Android or iOS system.

Information

CategoryUser

Gallery

Main screen

P 19 V2

My Upload

Upload the

item and

printable file

Printer

To remote

control

printer

About

Printer

information

and copyright

da Vinci 1.0 Pro

● Step

Open the Play Store from your Android browser or

App store of iOS system to search "XYZgallery" and download the application to your device.

After log in, you will see ” most popular”, "new"

and "printable*" three folders for you to choose.

Please register an account at XYZprinting official

website before logging in.

Select the object you want to print.

Select the printer and confirm the printer

information, tap "Confirm to print", the file will be sent to the printer and ready to print.

Note:

1.Ensure the mobile device and the printer are connected on the same wireless network.

2.Transferring a print fi le over a wireless network may take more time than transferring a print file from a USB mass storage device.

3. When a .3w file with incompatible slicing is selected, the message of “Printer Type does not match”will be displayed. We suggest

selecting other files or downloading .stl to slice before printing.

*The printable file is .3w format which can print from App directly. Some prints are.stl files that need to export into .3w format via XYZware before printing. If the fi le requires payment, please follow the payment instruction.

P 20 V2

da Vinci 1.0 Pro

Support Details

As the printer encounters issues, please refer to the following troubleshooting instruction to fix the issues. If the issue cannot be removed, please contact customer service center

Error message and Action

In the event of problems, related service code will be shown on the printer screen and/or software interface. Please refer to the description table of the service code for preliminary examination.

Service Code　 Symptom Action

0 0 0 3 (software)

0 0 0 7 (software)

0 0 0 8 (software)

0 0 1 0

0 0 1 1

0 0 1 3

0 0 1 4

0 0 2 8 (software)

0 0 2 9 (software)

Print bed heating problem

“UNIDENTIFIED CARTRIDGE”

shown on the printer screen indicates filament chip anomaly.

“UNIDENTIFIED CARTRIDGE”

shown on the printer screen indicates filament chip anomaly.

Print bed heating problem

Extruder heating problem

Print bed heating problem

Extruder heating problem

NO CARTRIDGE

(Filament is not installed correctly)

CARTRIDGE EMPTY

Confirm whether the heater works normally and whether the senor and heating rod are installed correctly or work normally. Problems