ENG
Clean the printer
This section describes how to properly clean the printer under the following conditions:
A. Fail to calibrate or printed object is polluted by different color filament
I. Printer calibration failed constantly II. Printed object is polluted by different color filament
jog mode
x-AXIS
Y-AXIS
Z-AXIS
1
Make sure the heated bed has been moved to
the appropriate location, or use JOG MODE
feature to adjust Z-AXIS.
2
Clean up the measurement points.
DA VINCI 1.0
UTILITIES
SETTINGS
INFO
Choose "UTILITIES",
3
and press "OK".
uTILITIES
CHANGE FILAMENT
HOME AXES
JOG MODE
Choose "JOG MODE",
4
and press "OK".
Make sure the extruder has been
moved away from the top of drip box.
Clean the surface of the print head using
8
the cooper brush.
5
uTILITIES
CHANGE FILAMENT
HOME AXES
JOG MODE
6
Choose "CHANGE
FILAMENT".
jog mode
x-AXIS
Y-AXIS
Z-AXIS
Select "Y-AXIS" ,and
choose "+" to move the
extruder to the appropriate
location.
CHANGE FILAMENT
7
Choose "UNLOAD FILAMENT" ,and Press "OK"
when this function is selected, the extruder will be
heated. Clean the printer when the extruder is in
high temperature will lead to better performance.
LOAD FILAMENT
UNLOAD FILAMENT
B. Clean the heated bed after printing finish
After printing is completed, power off the printer. Once the da Vinci has cooled
1
use a damp cloth to clean the heated bed.
2
Clean the heated bed helically with a damp cloth.
After cleaning is completed, wipe again with a dry cloth to ensure the heated bed
3
is completely dry.
-1-
Clean the printer
C. Empty the drip box
ENG
When drip box is full,use "JOG MODE" ,and
choose "Y-AXIS" to move the extruder to
the appropriate location.
jog mode
x-AXIS
Y-AXIS
Z-AXIS
3
Select "Y-AXIS" ,and
choose "+" to move the
extruder to the
appropriate location.
DA VINCI 1.0
UTILITIES
SETTINGS
INFO
1
Choose "UTILITIES",
and press "OK".
uTILITIES
CHANGE FILAMENT
HOME AXES
JOG MODE
2
Choose "JOG MODE",
and press "OK".
Make sure the extruder has been
moved away from the top of drip box.
Take out the drip box
and empty the box.
When the box is empty, reinstall
54
the drip box and reboot the
printer.
-2-
Loading...