Xuanying DMP422 User Manual

ONE

Product Introduction

Package contents

DMP422 *1
YPbPr Cable *1
Audio Cable *1

Power Adaptor *1
Remote Control *1

User Manual *1

Features

• Full HD up to 1080p

•

Playback wide range of video formats: RM/RMVB/MPEG/VOB/DAT/Divx/Xvid/MKV/
MP4/AVI/MOV /MPG/TS/TP/M2TS/AVI/WMV/FLV

• H.264 decode technology with 1080p resolution

• Supports HDMI, YPbPr & AV outputs

• SRT, SMI, SSA, ASS and SUB+IDX subtitle formats

• AC3/DTS /MP3/WMA/WAV/OGG/AAC/APE/FLAC audio with HDMI 1.3
and Audio L / R outputs

• Playback Resume & time setting(set the playback time)

• Multi-Languages OSD

Product specications

MPEG1

MPEG2

MPEG4(Xvid)

Video

H.264

WMV9/VC-1 M2TS (up to 1080p) , WMV (up to 1080p)

Real Video RM/RMVB (up to 720p)

MJPEG AVI (up to 1080p)

FLV FLV (up to 640*480)

Audio

Picture

Subtitle

Video Output

Button

Power

MP3 / WMA / WAV / OGG / AAC / APE / FLAC /RA / AC3 / DTS

JPG / BMP / PNG / GIF

SRT / SMI / ASS / SSA / idx+sub

AV(PAL / NTSC) / YPbPr(480P / 720P) /
HDMI(480P,720P,1080I,1080P)

Audio L / R / HDMI(Stereo)Audio Output

FAT16 / FAT32 / NTFS / exFATHard Disk

PowerLED

5 Function Keys

USB2.0 HostUSB OTG

SD / SDHC/MMCMemory Card

DC 5V

Audio & Video Decoding

DAT (up to 720*576) , MPG (up to 720*576) ,
MPEG (up to 720*576)

MPG(up to 1080p) , MPEG (up to 1080p) ,
VOB (up to 1080p) , TS/TP (up to 1080p)
M2TS (up to 1080p)

MKV (up to 1080p) , AVI (up to 1080p) ,
MP4 (up to 1080p) , M2TS (up to 1080p)

MKV (up to 1080p) , AVI (up to 1080p) ,
MP4 (up to 1080p) , MOV (up to 1080p)
M2TS (up to 1080p) , TS/TP (up to 1080p)

Hardware Specifications

, 2A

Remote control guide

Photo Music Movie

16:9/4:3 T

urn Zoom

BGMExit

OSD MenuVideo Standard

Function

Key

Enable/Disable Mute function

Power on/off and stand by mode

Go to Movie page.

Go to Music page.

Go to Photo page.

Zoom image

Turn function, the photo will rotate 90 degrees
clockwise each time this button is pressed

Switch between different aspect ratio

l

Vo

Volume up

Volume down

Play/Pause

Stop

Rewind

Fast Forward

Previous

Next

Arrow key, Up

Arrow key, Down

Arrow Key, Left

Arrow Key, Right

OK key, Select and confirm

BGM: Playback background music

Exit: Exit or Back to previous page

OSD: OSD menu / Info

Menu: Enter Main Menu page

Video Standard: Switch between
modes (YPbPr/Composite…). It only works in the
Menu page.

Red (the “Memory” button): jump to a certain time
of a video

Green

different output

Blue: Show/Hide the play menu

TWO

Activating media player

Once you have properly set up the media player following the instructions on the
Connection Diagram section, please turn on your TV to enter the main menu screen..

It is suggested that you plug your USB storage device before turning on your TV so

that you can see the function icons such as “Movie” and “Music”.

Switch the video source of your TV. Your TV comes with multiple video source such as
TV, AV, Components, HDMI and/or so on. Please switch to the correct source. For
instance, if you connect the media player to TV through YPbPr cables, please switch
the video source of the TV to “Components”. You may do that with the buttons on your

TV remote or buttons on the television.

Setting

Use the arrow keys on the remote to select “Setting” and press “OK” to enter

You will see a list of items once you have entered the “Setting” page.

The items include “Output”, “Language”, “Audio Format”, “Auto Play Mode”,
“System Information” and “Restore default”.

1.Once your Media player DMP422 power is on, it

will automatically display the main menu page
on your TV as the picture shown below. Please
use the left and right arrow keys to move
toward “settings” and press the OK key on
the remote to select “setting”. Right after, you
will see a list of items once you have entered
the “Setting” page. The items include output,

language, audio format, auto play mode,

system information and restore default.

Output

2.Once you are in the setting options page

please switch the video output standard for the
media player. Please press OK on your remote
to select “output”, and press the arrow keys to
view the different outputs, and then select your
desired output by pressing OK on your remote.
The outputs will be switched every time you

pr

ess the arrow key in the following order: PAL, NTSC, 480P, 720P(50HZ),
720P(60HZ), HDMI-720P(50HZ), HDMI-720P(60HZ), HDMI-1080I(50HZ), HDMI­1080I(60HZ), HDMI-1080P(50HZ) and HDMI-1080P(60HZ).

.