Xtramus MCM-7S81-W, MCM-8S22-W, MCM-8S23-W, MCM-8S83-W, MCM-8S62-W User Manual
...
MCM-W Series
Media Converter
User’s Manual
USM Ver 1.3
Foreword
Copyright
Copyright © 2012 Xtramus T echnologies, all rights reserved. The information contained in this document is the property of Xtramus
Technologies. No part of this publication shall be reproduced, stored in a retrieval system, or transmitted, in any form or by any
means, without the prior written permission of Xtramus Technologies.
Disclaimer
The information contained in this document is subject to change without notice and does not represent a commitment on the part of
Xtramus Technologies. The information in this document is believed to be accurate and reliable. However, Xtramus Technologies
assumes no responsibility or liability for any errors or inaccuracies that may appear in the document.
Trademarks
MCM-W is a trademark or registered trademark of Xtramus Technologies. All other trademarks and registered trademarks are the
property of their respective owners.
Warranty
Xtramus Technologies warrants for the hardware provided along with this document under proper usage and conditions in normal
environment; any improper operation or in irregular environment may possibly ca use this product NOT function well. For detailed
terms, please contact your local dealer.
Contact Information
Xtramus Technologies
E-mail: sales@xtramus.com
Website: www.xtramus.com
Tel: +886-2-8227-6611
Fax: +886-2-8227-6622
2
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
Revision History
Date Version History
2011/05/06 1.0 First draft version
2011/10/06 1.1
1. Change management webpage pictures.
2. Adding notes regarding to FPGA/Firmware upgrading.
3. Adding notes regarding to using management webpage
while phone jack to RS232 cable is still plugged.
2011/12/28 1.2
1. Modify figures according to new Web UI on page 26,
27, 31~35.
2. Add DDMI function on page 28.
3. Adding more information about product features and
main applications on page 7.
2012/02/14 1.3
1. Page 31, adding Link Loss Forwarding section.
2. Page 38, changing the MCM-W HyperTerminal main
screen figure.
3. Page 39, changing the MCM-W HyperTerminal main
screen figure, and adding “ddmi” & “llf” commands in
the table.
4. Page 40, change command “devname” to “name”.
5. Page 40, adding “location” and “contact commands.
6. Page 44, adding “ddmi” & “llf” functions descriptions.
3
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
Table of Contents
Foreword..........................................................................................................................................2
Revision History..............................................................................................................................3
1. MCM-W Overview ........................................................................................................................6
1.1. General Descriptions of MCM-W.......................................................................................6
1.2. Features, Key Advantages, and Main Applications of MCM-W......................................7
1.3. MCM-W Functions Overview .............................................................................................8
1.3.1. MCM-W Outer Case .......................................................................................................8
1.3.2. MCM-W Front Panel.......................................................................................................9
A. Front Panel of MCM-7S81-W..........................................................................................9
B. Front Panel of MCM-8S22-W........................................................................................10
C. Front Panel of MCM-8S23-W........................................................................................11
D. Front Panel of MCM-8S82-W........................................................................................12
E. Front Panel of MCM-8S62-W ........................................................................................13
F. Front Panel of MCM-8S33-W.........................................................................................14
G. Front Panel of MCM-8S83-W ........................................................................................15
1.3.3. MCM-W Back Panel .....................................................................................................16
2. MCM-W Series Installation........................................................................................................17
2.1. Choices of UTP Cable and Optical fiber.........................................................................17
2.1.1. 10GBASE-T (Copper Wire)..........................................................................................17
2.1.2. 10GBASE-R (Optical Fiber).........................................................................................18
2.2. Connection of UTP Cable and Optical fiber...................................................................19
2.2.1. 10GBASE-T (Copper Wire)..........................................................................................19
2.2.2. 10GBASE-R (Optical Fiber).........................................................................................19
2.3. Applications Examples for Your Network.......................................................................21
2.3.1. Application for University...........................................................................................21
2.3.2. Application for Online Game Company.....................................................................22
2.3.3. Application for Home Users .......................................................................................23
3. MCM-W Management ................................................................................................................24
3.1. Managing MCM-W with Management Webpage.............................................................24
3.1.1. Accessing MCM-W Management Webpage...............................................................25
3.1.2. MCM-W Management Webpage – Overview..............................................................26
3.1.3. MCM-W Management Webpage – System.................................................................27
A. System Information ..........................................................................................................27
3.1.4. MCM-W Management Webpage – DDMI ....................................................................28
3.1.5. MCM-W Management Webpage – Management........................................................29
A. IP Configuration............................................................................................................29
B. User Settings.................................................................................................................30
C. System Configuration...................................................................................................30
D. SNMP Setting.................................................................................................................31
E. Link Loss Forwarding...................................................................................................31
3.1.6. MCM-W Management Webpage – USC Setting.........................................................32
3.1.7. MCM-W Management Webpage – Counter................................................................33
A. Device Counter..............................................................................................................33
B. Port A/B-USC.................................................................................................................34
3.1.8. MCM-W Management Webpage – Maintenance........................................................35
A. Save Changes................................................................................................................35
B. Update F/W (Firmware).................................................................................................35
C Update FPGA..................................................................................................................35
D. System Reboot..............................................................................................................36
E. System Config...............................................................................................................36
F. Config Upload ................................................................................................................36
G. Factory Defaults ............................................................................................................36
3.2. Managing MCM-W with HyperTerminal...........................................................................37
3.3.1. HyperTerminal Settings for MCM-W...........................................................................37
4
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
3.3.2. MCM-W HyperTerminal Commands...........................................................................39
A. MCM-W HyperTerminal Command – system..............................................................40
B. MCM-W HyperTerminal Command – counter .............................................................43
C. MCM-W HyperTerminal Command – ip .......................................................................43
D. MCM-W HyperTerminal Command – ddmi..................................................................44
E. MCM-W HyperTerminal Command – LLF....................................................................44
F. MCM-W HyperTerminal Command – cls......................................................................44
G. MCM-W HyperTerminal Command – logout................................................................44
4. MCM-W General Specifications................................................................................................45
5
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
1. MCM-W Overview
1.1. General Descriptions of MCM-W
MCM-W is a complete and versatile solution for
applications such as FTTx, CWDM, and carrier
Ethernet. By the diversified speeds of
1,000Mbps and 10Gbps, Xtramus provides
standalone MCM-W for different applications
and can be applied according to your ideal
network topology.
Xtramus’ MCM-W provides various interfaces
such as UTP, SFP, SFP+, XFP and CX4. All these interfaces are developed to support the protocols such
as 100Base-Tx, 100Base-Fx, 1000Base-T, 1000Base-X, 10GBase-T, 10GBase-LR, 10GBase-SR and
10GBase-CX4, thus making your network more complete and solid.
All MCM-Ws are equipped with real-time LEDs which display the status of each port, thus allowing users
to view network status easily.
MCM-W provides an easy-to-access Management Webpage, allowing users to view system status,
counters, and network statistics.
Also, MCM-W supports MIB Counter Report including counters such as Packet, Byte, Broadcast packet,
Pause Frame, Length: 64 Bytes, Length: 65-127 Bytes, Length: 128-255 Bytes, Length: 256-511 Bytes,
Length: 512-1023 Bytes, Length: 1024-1518 Bytes, Unicast packet, Multicast packet, CRC Error, IP
Checksum Error (Not supported for MCM-7S81-W), Under size packet, and Over size packet.
With various interfaces, MCM-W provides different conversions between fibers and copper wires in
10Gbps Ethernet.
6
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
1.2. Features, Key Advantages, and Main Applications of MCM-W
Features
¾ Diversified interfaces including SFP, SFP+, RJ45, XFP and CX4
¾ Supports 3R (Re-generation, Re-timing, Re-shaping) Performance for extending network cable
coverage
¾ Supports Jumbo Frame
¾ Supports D/D (Digital Detection) functioned optical transceivers and overload protection
¾ Support easy-to-use Management Webpage that allows users to view system status, counters,
and network statistics
¾ Supports SNMP (Simple Network Management Protocol)
¾ Supports Link Loss Forwarding
¾ Supports DDMI (Digital Diagnostics Monitoring Interface), allowing users to view status such as
Temperature, Supply Voltage, Tx Bias Current, Tx Power (dBm), and Rx Power (dBm).
Key Advantages
¾ Fast connection with multi-function
¾ Provide reliable long-distance connection
¾ Port supported: SFP, SFP+, RJ45, XFP and CX4
¾ Small portable size case
¾ Plug and play without extra configuration
Main Applications
¾ Media converter for network backbone
¾ Connection between fiber to copper or fiber to fiber 10G Ethernet equipment
¾ Providing protections against lightning and static electricity for Ethernet network and the network
main system
¾ Providing additional network management options
¾ Can be applied in Telecommunication room, R&D laboratory, Data center, etc
7
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
1.3. MCM-W Functions Overview
1.3.1. MCM-W Outer Case
MCM-W’s outer case consists three parts: Front Panel, Cooling Fan, and Back Panel. The figure
above shows the outer case of MCM-8S22-W. Outer cases of other MCM-W are quite the same and can
be related.
MCM-W Outer Case Overview
Front Panel
MCM-W comes with various different types of ports, providing media converting
platforms for different types of media. Please see “1.3.2. MCM-W Front Panel”
for more detailed information.
Cooling Fan
Cooling fan for ventilation. All MCM-W (expect MCM-7S81-W) have cooling fans
installed.
Back Panel
MCM-W’s back panels allow users to access their management web pages or
making configurations via hyper terminal softwares. Also, MCM-W’s power jack
is located on the back panel as well. Please see “1.3.3. MCM-W Back Panel”for
more detailed information.
8
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
1.3.2. MCM-W Front Panel
As mentioned in “1.3.1. MCM-W Outer Case”, MCM-W comes with various different types of ports,
providing media converting platforms for different types of media. Please see the sections down below
for more detailed information/specification for MCM-W.
A. Front Panel of MCM-7S81-W
MCM-7S81-W Front Panel Specification
Port A
RJ45
Interface
Port B
SFP
Data Transfer Rate
1000 Mbps
Ethernet Mode
1000Base-T
1000Base-X
LED Status
Green ON
MCM-7S81-W is power on.
Power
Green OFF
MCM-7S81-W is power off.
Green ON
MCM-7S81-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-7S81-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
▇
User-defined LED
▲
User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
9
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
B. Front Panel of MCM-8S22-W
MCM-8S22-W Front Panel Specification
Port A
SFP+
Interface
Port B
SFP+
Data Transfer Rate
10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
LED Status
Green ON
MCM-8S22-W is power on.
Power
Green OFF
MCM-8S22-W is power off.
Green ON
MCM-8S22-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-8S22-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
▇
User-defined LED
▲
User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
10
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
C. Front Panel of MCM-8S23-W
MCM-8S23-W Front Panel Specification
Port A
SFP+
Interface
Port B
XFP
Data Transfer Rate
10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
LED Status
Green ON
MCM-8S23-W is power on.
Power
Green OFF
MCM-8S23-W is power off.
Green ON
MCM-8S23-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-8S23-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
▇
User-defined LED
▲
User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
11
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
D. Front Panel of MCM-8S82-W
MCM-8S82-W Front Panel Specification
Port A
RJ45
Interface
Port B
SFP+
Data Transfer Rate
10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
10GBase-T
LED Status
Green ON
MCM-8S82-W is power on.
Power
Green OFF
MCM-8S82-W is power off.
Green ON
MCM-8S82-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-8S82-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
▇
User-defined LED
▲
User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
12
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
E. Front Panel of MCM-8S62-W
MCM-8S62-W Front Panel Specification
Port A
CX4
Interface
Port B
SFP+
Data Transfer Rate
10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
10GBase-CX4
LED Status
Green ON
MCM-8S62-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-8S62-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
Note: All LEDS will be off when upgrading FPGA/Firmware
13
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
F. Front Panel of MCM-8S33-W
MCM-8S33-W Front Panel Specification
Port A
XFP
Interface
Port B
XFP
Data Transfer Rate
10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
LED Status
Green ON
MCM-8S33-W is power on.
Power
Green OFF
MCM-8S33-W is power off.
Green ON
MCM-8S33-W is booting properly and is
ready for tests.
SYS
Yellow ON
Error occurred when booting MCM-8S33-W.
Green ON
Port A/B is connected.
A/B
Green Blinking
Port A/B is transmitting/receiving data.
▇
User-defined LED
▲
User-defined LED
Note: All LEDS will be off when upgrading FPGA/Firmware
14
E-mail: sales@xtramu s .com
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES®
Loading...