Xterra SB150 User Manual
FITNESS
SB150 RECUMBENT BIKE
OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING YOUR NEW RECUMBENT
Congratulations On Your New Bike and Welcome to the XTERRA Fitness Family!
Thank you for your purchase of this quality tness bike from XTERRA Fitness. Your new
tness bike has been manufactured by one of the leading tness manufacturers in the world.
XTERRA Fitness will do all we can to make your ownership experience as pleasant as
possible for many years to come. If you have questions, or if parts are missing or damaged,
or you require customer service, call (870) 333-5500. Please have your model number and
serial number handy when you call.
Please take a moment to record where you purchased your machine, as well as the date of
purchase for future reference. We appreciate your condence in XTERRA Fitness and we
will always remember that you are the reason that we are in business. Please complete and
mail your registration card today and enjoy your new tness bike.
Yours in Health,
XTERRA Fitness
Table Of Contents
Product Registration
Important Safety Instructions
SB150 Assembly Instructions
Operation of Your Console
Program Operation
Manufacturer’s Limited Warranty
ATTENTION
THIS Fitness bike IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS
THIS WARRANTY IN ITS ENTIRETY.
SB150_VER1_20160524
1
2
4
13
16
24
Product Registration
Purchase Location
Purchase Date
Record Your Serial Number
Please record the Serial Number of this tness product
in the space provided below.
Serial Number
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to
XTERRA Fitness. You can also go to www.xterratness.com/warrantyreg.html
to register online.
Power
This product uses an external power supply. The adapter must be plugged into
the power jack, located on the front of the unit near the stabilizer tube. Next, plug
the adapter into the appropriate wall outlet. When not in use, it is recommended to
unplug the power supply from the wall outlet.
IMPORTANT: If the product has been exposed to cold temperatures, allow the
product sit in room temperature to warm up before plugging in the adapter. Failure
to do so may result in damage to the display or electronic components.
IMPORTANT: Do not operate the product if the power supply, its plug, or its cord
has been damaged.
1
SB150 Recumbent Bike
Important Safety Instructions
When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
WARNING - To reduce the risk of burns, re electric shock, or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and
before putting on or taking off parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause re, electric shock, or injury
to persons.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled
persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the appliance to a service center for examination and
repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the
like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being use or where oxygen is being administered.
12. Connect this appliance to a properly grounded outlet only.
13. The appliance is intended for household use.
Fitness Equipment Safety Instructions
• To disconnect, turn all controls to the off position, then remove the plug from the outlet.
• Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and
equipment may result.
• Before beginning this or any exercise program, consult a physician. This is especially important for
persons over the age of 35 or persons with pre-existing health conditions.
• Keep hands away from all moving parts.
• The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the
accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart
rate trends in general.
• Do not attempt to use your equipment for any purpose other than for the purpose it is intended.
• Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
equipment. Quality athletic shoes are recommended to avoid leg fatigue.
Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose
yourself (and possibly others) to injury, and reduce the longevity of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
CAUTION!! Please be careful when unpacking the carton.
SB150 Recumbent Bike
2
Before you begin
Thank you for selecting our revolutionary Xterra SB150 Fitness Bike. Cycling is an effective exercise for
increasing cardiovascular tness, building endurance, and toning the body. Our tness bike provides an
impressive selection of features designed to make your workouts at home more effective and enjoyable.
For your benet, read this manual carefully before you use you tness bike. To help us assist you, note the
product model number and serial number before contacting us. Before reading further, please familiarize
yourself with the parts that are labeled in the drawing below
Console
Seat Back
Handle Bars
Seat Cushion
Hand Pulse Grip
Console Upright
Pedals
Rear Stabilizer
Shroud
Front Stabilizer
3
SB150 Recumbent Bike
SB150 Pre-Assembly Check List
PART NO.
1
3
6
9
10
11
12
13
36/37
40
41
43
44
45
46
47/48
DESCRIPTION
Main frame
Front Stabilizer
Rear Stabilizer
Front post
Computer
Stationary handlebar R
Stationary handlebar L
Rear handlebar
Right/Left pedal
Support Tube
Sliding Tube
Seat support bracket
Back cushion
Seat cusjion
Bottle holder
Left/Right rear support cover
Hardware bag
Manual
Q’TY
1
1
1
1
1
1
1
1
1/1
1
1
1
1
1
1
1/1
1
1
SB150 Recumbent Bike
4
SB150 Assembly Pack Checklist
Part No. Description Q’ty
2 Allen Screw M8*75 2
4 Spring Washer 2
5
21 Allen Screw M8*16 30
23 Carriage Bolt M10*75 2
24
28 Carriage Bolt M8*40 2
29 Domed Nut M8 2
31 Domed Nut M10 2
38 Flat Washer Φ17*Φ8.5 6
39 Leveling Pad 1
Curved Washer
Φ8*Φ20*1.5
Curved Washer
Φ10*Φ22*1.5
12
2
42 Quick Release Knob 1
88 Box Wrench 1
89 Allen Key 6mm 1
Note: Above parts are all the parts needed to assemble this machine. Before you start to assemble,
please check the hardware packing to make sure they are included.
5
SB150 Recumbent Bike
SB150 Assembly Instructions
1
Front Stabilizer
1. Attach the front stabilizer (3) to the main frame (1), securing
with two allen screws (2), two spring washers (4) and two
curved washers (5).
Hardware Step 1
2 Allen Screws (#2)
2 Curved Washers
(#5)
2 Spring Washers (#4)
SB150 Recumbent Bike
6
2
Hardware Step 2
Support Tube and Rear Stabilizer
6 Allen Screw (#21)
6 Flat Washers (#38)
2 Carriage Bolt (#23)
2 Curved Washers
(#24)
2 Domed Nut (#31)
1. Connect middle extension hand pulse wire (33) with rear extension hand pulse wire (34). Attach support tube (40) to main
frame (1), and tighten with 6 sets of allen screw (21) and at
washer (38). Attach the leveling pad (39) to the bottom of main
frame (1).
2. Attach rear stabilizer (6) to the support tube (40) and tighten
with 2 sets of carriage bolt (23), curved washer (24) and
domed nut (31).
Tip: Avoid pinching the Extension Wires
7
SB150 Recumbent Bike
Loading...