X Rockers 51475 User Manual

S-355W-5-DC() L26XW19CM4105G X ROCKER(V3)CEC4 S-355W-5-DC REV1.0 HR4040
Thank you for purchasing the X !Rocker We know
you will enjoy your X Rocker experience as much
as we do.
Welcome to the world of interactive audio. With
music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing a
game, you will become a part of it.
Get ready to experience sound as you never have!
IMPORTANT: You must keep your original retail receipt as proof of purchase.
HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE: #51475
Need Help? Email: service@acebayou.com Web: www.thexrocker.com Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262
1
A1
A2
A3 A4
A5
FEATURES
A-Control Panel
A1-Bass Volume Adjustment A2-Volume Adjustment
A3-Audio Input Jack A4-Audio Output A5-Wireless Band A6-Power On/Off Switch A7-9V DC Power Input Jack
A8-Power Indicator Light A9-MP3 Input Jack A10-Headphone Jack
DC 3V/200mA Power Input Jack of TX
A11­A12-Audio Input Jack of TX A13-PowerOn/OffSwitchofTX A14-Wireless Band Switch of TX
Jack
Switch
A10
A9
B5
B6
B7
B1
B2
B3
B4
A6
A7
9.84ft/3m
3 28ft/1m.
0.492ft/0.15m
*SOME PARTS MAY VARY SLIGHTLY
A8
0.492ft/0.15m
B-Accessories Supplied
B1-3m RCA Stereo to RCA stereo plug cable(1 PC) B2-1m 3.5mm stereo male to 3.5mm stereo male cable (1PC) B3-RCA female to female barrel adapter (2 PCS ) B4-0.15m RCA stereo male to 3.5mm stereo male cable (1PC) B5-0.15m 3.5mm stereo male to 3.5mm stereo male cable (1PC) B6-INPUT:100-240V AC 50/60Hz
OUTPUT:9V DC 1000mA 9W Main POWER Adapter.
(EFFICIENCY LEVEL: 115V )
B7-TX Box
A12
A13
A14
C-Audio Specifications
.
The unit specifications:
1)
2)
3)
4)
.TX / RX specification:
1) TX Power supply 3V DC
2) TX Current: 40mA
3) RX Current: 20mA
4) TX Transmission distance: < 65.6 ft / 20 meters
5) Environmental temperature:
6) Modulation mode: FSK
7) TX Work frequency: 863.3, 863.9,864.55MHz
8) RX Work frequency: 863.3, 863.9,864.55MHz
9) TX Power: 10dBM
10) RX Sensitivity:-100dBM
11) RX frequency range: 50Hz~13KHz
12) Second harmonic suppression: -40dB
13) Band quantity: 3 channels
OFF/ON
123…………
BAND
Signal-to-Noise Ratio(Amplifier): Subwoofer: 50dB Satellite: 60dB Frequency Response: 60Hz~15kHz Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz) Input: DC 9V/1A
2XAAA Batteries (BATTERIES ARE NOT INCLUDED )
(No buildings or other barriers)
00
14 F~158 F / -10 ~70
AUDIO IN
A11
DC IN DC 3V
/200mA
℃℃
Need Help? Email: service@acebayou.com Web: www.thexrocker.com Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262
2
FUNCTIONS:
Foldable construction for ease of storage and portability. Side control panel with volume, bass control, and input/output jacks, and band switch. Ergonomic design with full back support. Easy to clean heavy duty upholstery grade vinyl cover. Wireless audio transmission
READ BEFORE USAGE:
Always make sure hinge is locked before moving. Always make sure hinge is locked before sitting in the chair. Excessive use of audio equipment could lead to hearing loss. Excessive sound pressure from earphones and headphones can cause hearing loss. Children under the age of 13 should not use this product without adult supervision. Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures. If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry. Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you at risk for injury or death from electrical shock. When using in wire mode, please keep the band to "OFF" (A5). The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the distortion should go away. Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc. Do not mix old and new batteries.
1. Lift X Rocker out of box.
2. Keep the chair in the folded position and place it on the floor so that back side of the chair is facing up and the bottom of the seat is touching the floor.
3. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.
4. Please complete steps 1-4 to assemble the chair.
5. When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source and 6.5ft / 2 meters from a power source.
6. Unpack the power adapter and connect it to the main power outlet, then to the power jack on the control panel. (A7)
7. Press the power button (A6) and confirm that the power indicator light (A8) is on. In wireless mode, turn on the power to the TX box (A13), confirm that its indicator light is on, and check that the band selected on the TX box (A14) is the same as that selected on the control panel (A5) of the X Rocker.
8. Follow the connection diagrams. They show how to connect the X Rocker to the audio source of your choice .
9. Adjust the bass and volume levels to your preference---start rocking.
1266 261
A BCDE GF
1
HI
I
J
C
F
Step1: Place the arm bracket(H) on the right side of the chair. Please pay careful attention to the drawing to be sure you have the correct arm bracket for that side .Use 2bolts(C)with washer (G)to fasten the arm bracket to the side of the chair .Tighten the bolts with the Allen wrench provided(I).
Step2: Attach the right arm to the chairusingthepartsshowninthe illustration. The metal sleeve will position itself inside the arm hole and the large washer(F)should be between the arm and the chair. Tighten the bolts with the Allen wrench provided(I). When assembled correctly the arm should pivot freely.
Step3: Push the plastic caps(D)into the bolts holes to finish the arm assembly for that side. Repeat steps 1-3 for the left side of the chair.
Insert pin(J)into closureStep4:
Need Help? Email: service@acebayou.com Web: www.thexrocker.com Phone: 1 931 359 2603, In Europe, call +44 (0)845 468 0262
21
J
3
Loading...
+ 5 hidden pages