X Rockers 51458 User Manual

APM013523.00G S-355W-VM-10()
L26XW19CM 4 105GX ROCKE(N) S-355W-VM-10 REV1.0 ROHS

Thank you for purchasing the X !Rocker We know

you will enjoy your X Rocker experience as much

as we do.

Welcome to the world of interactive audio. With

your new X Rocker you can now not only hear your

music but actually FEEL it. Whether you are

listening to music, watching a movie, or playing a

game, you will become a part of it.

Get ready to experience sound as you never have!

IMPORTANT: You must keep your original retail receipt as proof of purchase.

HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE: #51458

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

1

A1

A2

A3

A4

A5

A6

FEATURES

A-Control Panel

A1-Vibration adjustment
A2-Bass Volume Adjustment
A3-Volume Adjustment
A4-Audio Input Jack
A5-Audio Output Jack for linking multiple chairs
A6-Wireless Band Switch
A7-Power On/Off Switch
A8-12V DC Power Input Jack
A9-Power Indicator Light
A10-MP3 Input Jack
A11-Headphone Jack
A12-DC 3V/200mA Power Input Jack of TX
A13-Audio Input Jack of TX
A14-PowerOn/OffSwitchofTX
A15-Wireless Band Switch of TX

A13

AUDIO IN

DC-12V/1.5A

A15

A14

B3

B6

A10

A11

C-Audio Specifications

.Ⅰ

The unit specifications:

1)

Signal-to-Noise Ratio(Amplifier):
Subwoofer: 50dB
Satellite: 60dB
Frequency Response: 60Hz~15kHz

2)
Distortion:

3)
Subwoofer: 4% (F=100Hz)
Satellite: 1% (F=1kHz)
Input: DC 12V/1.5A

4)

.TX / RX specification:

Ⅱ

1) TX Power supply 3V DC
2XAAA Batteries (BATTERIES ARE NOT INCLUDED )

2) TX Current: 40mA

3) RX Current: 20mA

4) TX Transmission distance: < 65.6 ft / 20 meters
(No buildings or other barriers)

5) Environmental temperature:

00

14 F~158 F / -10 ~70

6) Modulation mode: FSK

7) TX Work frequency: 863.3, 863.9,864.55MHz

8) RX Work frequency: 863.3, 863.9,864.55MHz

9) TX Power: 10dBM

10) RX Sensitivity:-100dBM

11) RX frequency range: 50Hz~13KHz

12) Second harmonic suppression: -40dB

13) Band quantity: 3 channels

A8

A7

9.84ft/3m

B1

0.492ft/0.15m

B4

A9

3 28ft/1m.

B2

0.492ft/0.15m

B5

B7

*SOME PARTS MAY VARY SLIGHTLY

B-Accessories Supplied

B1-3m RCA Stereo to RCA stereo plug cable(1 PC)
B2-1m 3.5mm stereo male to 3.5mm stereo male cable (1PC)
B3-RCA female to female barrel adapter (2 PCS )
B4-0.15m RCA stereo male to 3.5mm stereo male cable (1PC)
B5-0.15m 3.5mm stereo male to 3.5mm stereo male cable (1PC)
B6-INPUT:100-240V AC 50/60Hz

OUTPUT:12V DC 1500mA 18W Main POWER Adapter.

B7-TX Box

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

2

OFF/ON

123…………

BAND

＞

＞

＜

＜

/200mA

℃℃

＜

A12

DC IN DC 3V

FUNCTIONS:

Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, vibration control, input/output jacks, and band switch.
Ergonomic design with full back support.
Easy to clean heavy duty upholstery grade vinyl cover.
Wireless audio transmission

READ BEFORE USAGE:

Always make sure hinge is locked before moving.
Always make sure hinge is locked before sitting in the chair.
Excessive use of audio equipment could lead to hearing loss.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.
Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you
at risk for injury or death from electrical shock.
When using in wire mode, please keep the band to "OFF" (A6).
The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound
coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.
Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.

SE T UP:

1. Lift X Rocker out of box.

2. Keep the chair in the folded position and place it on the floor so that back side of the chair is and
the bottom of the seat is .

3. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.

4. Please complete steps 1-4 to assemble the chair.

5. When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source
and 6.5ft / 2 meters from a power source.

6. Unpack the power adapter and connect it to the main power outlet, then to the power jack on the control panel. (A8)

7. Press the power button (A7) and confirm that the power indicator light (A9) is on. In wireless mode, turn on the power to
the TX box (A14), confirm that its indicator light is on, and check that the band selected on the TX box (A15) is the same
as that selected on the control panel (A6) of the X Rocker.

8. Follow the connection diagrams. They show how to connect the X Rocker to the audio source of your choice .

9. Adjust the bass and volume levels to your preference---start rocking.

touching the floor

facing up

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

3