X Rockers 51437 User Manual

S-306W-8-DC():
L260X190mm 4 105g,

Thank you for purchasing the X ROCKER!
We know you will enjoy your X Rocker experience
as much as we do.

Welcome to the world of interactive audio. With
your new X Rocker you can now not only hear
your music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing
a game, you will become a part of it.

Get ready to experience sound as you never have!

IMPORTANT: You must keep your original retail receipt as proof of purchase.

HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE: #51437

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

1

FEATURES

A-Control Panel

A1-Power Indicator Light
A2-Audio Input Jack
A3-

Wireless Band Switch
A4-Volume Adjustment
A5-

Bass Volume Adjustment
A6-Power On/Off Switch
A7-9VDCPowerInputJack
A8-Headphone Jack
A9-

Audio Output for linking multiple chairs
A10-DC Power Input Jack of TX
A11-Audio Input Jack of TX
A12-PowerOn/OffSwitchofTX
A13-

3V/200mA

Wireless Band Switch of TX

9.84ft/3m

0.492ft/0.15m

0.492ft/0.15m

B5

0.492ft/0.15m

*SOMEPARTSMAYVARYSLIGHTLY

B6

B7

A11

A12

A13

OFF/ON

123…………

BAND

AUDIO IN

A10

DC IN DC 3V

B-Accessories Supplied

B1-3m RCA Stereo male to 3.5mm stereo cable (1 PC)
B2-INPUT:100-240V AC 50/60Hz

OUTPUT:9V DC 1000mA 9W Main POWER Adapter.
B3-RCA female to female barrel adapter (2 PC )
B4-0.15 RCA s to

m tereo female 3.5mm stereo male cable (1PC)
B5-TX Box
B6-0.15m
B7-3.5mm stereo to (1PC)

C-Audio Specifications:

The unit specifications:Ⅰ

.
Signal-to-Noise Ratio(Amplifier):Subwoofer: 50dB Satellite: 60dB
Frequency Response: 60Hz~15kHz
Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz)
Input: DC 9V/1A

Ⅱ

.TX / RX specification:

1) TX Power supply

2) TX Current: 40mA

3) RX Current: 20mA

4) TX Transmission distance: < 65.6 ft / 20 meters (No buildings

5) Environmental temperature: 14 F~158 F / -10 ~70

6) Modulation mode: FSK

7) TX Work frequency: 863.3, 863.9,864.55 MHZ

8) RX Work frequency: 863.3, 863.9,864.55 MHZ

9) TX Power: 10dBM

10) RX Sensitivity:-100dBM

11) RX frequency range: 50Hz~13KHz

12) Second harmonic suppression: -40dB

13) Band quantity: 3 channels

RCA stereo male to 3.5mm stereo male cable (1PC)

male 3.5mm stereo male cable

＜＜

3V DC/200mA

2XAAA Batteries (BATTERIES ARE NOT INCLUDED )

or other barriers)

＜

male

S

＞＞

00

℃℃

2

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

FUNCTIONS:

Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, input/output jacks, and band switch.
Ergonomic design with full back support.
Easy to clean heavy duty upholstery grade vinyl cover.
Wireless audio transmission

READ BEFORE USAGE:

Always make sure hinge is locked before moving.
Always make sure hinge is locked before sitting in the chair.
Excessive use of audio equipment could lead to hearing loss.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.
Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts
you at risk for injury or death from electrical shock.
When using in wireless mode connect the audio cable to the RX. Do NOT connect the audio input directly to the X Rocker
or the device will be DAMAGED.
The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound
coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.
Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.

PICTURE OUT OF BOX

SITTING POSITION

SE T UP:

1

.

2.

Keep the chair in the folded position and place it on the floor so that the back side of the chair is and the
bottom of the seat .

3.

Review the set-up diagrams to familiarize yourself with the s components, accessories, and set-up.

4.

Pull and secure the velcro flap.

6.

Unpack the power adapter, plug it into a power outlet and connect it to the power jack (A7) on the control panel.

7.

Press the power button (A6) and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power to the TX
box (A12), confirm that its indicator light is on, and check that the band selected on the TX box (A13) is the same as that selected
on the (A3) of the X Rocker.

8.

Follow the diagrams to connect the to the audio source of your choice in wired or wireless mode.

9.

Adjust the bass and volume levels to your preference start rocking.

X Rocker

Lift the out of the box

touching the floor

control panel

X Rocker

is facing up

X Rocker

…

＇

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

3