X Rockers 51368 User Manual

S-306W-6-DC():APM007256.02G
L260XW190MM4105G X ROCKER(N)  S-306W-6-DC REV3.0 ROHS

Thank you for purchasing the X ROCKER!
We know you will enjoy your X Rocker experience
as much as we do.

Welcome to the world of interactive audio. With
your new X Rocker you can now not only hear
your music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing
a game, you will become a part of it.

Get ready to experience sound as you never have!

IMPORTANT: You must keep your original retail receipt as proof of purchase.

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

Please have this item number ready when contacting Customer Service: #51368

1

FEATURES

A-Control Panel

A1-Power Indicator Light
A2-Audio Input Jack
A3-

Wireless Band Switch
A4-Volume Adjustment
A5-

Bass Volume Adjustment
A6-Power On/Off Switch
A7-9V DC Power Input Jack
A8-Headphone Jack
A9-

Audio Output Jack
A10-DC Power Input Jack of TX
A11-Audio Input Jack of TX
A12-PowerOn/OffSwitchofTX
A13-

3V/200mA

Wireless Band Switch of TX

2

A11

OFF/ON

123…………

BAND

00

9.84ft/3m

0.492ft/0.15m

0.492ft/0.15m

B5

0.492ft/0.15m

B6

B7

*SOME PARTS MAY VARY SLIGHTLY

A12

A13

B-Accessories Supplied

B1-3m RCA Stereo male to 3.5mm stereo cable (1 PC)
B2-INPUT:100-240V AC 50/60Hz

OUTPUT:9V DC 1000mA 9W Main POWER Adapter.
B3-RCA female to female barrel adapter (2 PC )
B4-0.15 RCA s to

m tereo female 3.5mm stereo male cable (1PC)
B5-TX Box
B6-0.15m
B7-3.5mm stereo to (1PC)

C-Audio Specifications:

The unit specifications:Ⅰ

.

Signal-to-Noise Ratio(Amplifier):Subwoofer: 50dB Satellite: 60dB
Frequency Response: 60Hz~15kHz
Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz)
Input: DC 9V/1A

.TX / RX specification:

Ⅱ

1) TX Power supply
2XAAA Batteries (BATTERIES ARE NOT INCLUDED )

2) TX Current: 40mA

3) RX Current: 20mA

4) TX Transmission distance: < 65.6 ft / 20 meters (No buildings
or other barriers)

5) Environmental temperature: 14 F~158 F / -10 ~70

6) Modulation mode: FSK

7) TX Work frequency: 863.3, 863.9,864.55 MHZ

8) RX Work frequency: 863.3, 863.9,864.55 MHZ

9) TX Power: 10dBM

10) RX Sensitivity:-100dBM

11) RX frequency range: 50Hz~13KHz

12) Second harmonic suppression: -40dB

13) Band quantity: 3 channels

RCA stereo male to 3.5mm stereo male cable (1PC)

male 3.5mm stereo male cable

＜＜

3V DC/200mA

＜

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

AUDIO IN

DC IN DC 3V

male

S

＞＞

℃℃

A10

FUNCTIONS:

Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, input/output jacks, and band switch.
Ergonomic design with full back support.
Easy to clean heavy duty upholstery grade vinyl cover.
Wireless audio transmission

READ BEFORE USAGE:

Always make sure hinge is locked before moving.
Always make sure hinge is locked before sitting in the chair.
Excessive use of audio equipment could lead to hearing loss.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.
Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts you
at risk for injury or death from electrical shock.
When using in wire mode, please keep the band to "OFF" (A3).
The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound
coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.
Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.

SET UP:

1. Lift X Rocker out of box .

2. Keep the chair in the folded position and place it on the floor so that back side of the chair is facing up and
the bottom of the seat is touching the floor.

3. Review the set up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.

4. Please complete 1-4 to assemble the chair.

5. When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source
and 6.5ft / 2 meters from a power source.

6. Unpack the power adapter and connect it to the main power outlet, then to the power jack on the control panel. (A7)

7. Press the power button (A6) and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power to
the TX box (A12), confirm that its indicator light is on, and check that the band selected on the TX box (A13) is the same
as that selected on the control panel (A3) of the X Rocker.

8. Follow the connection diagrams. They show how to connect the X Rocker to the audio source of your choice .

9. Adjust the bass and volume levels to your preference---start rocking.

1

A BCDE GF

H

I

Step1: Place the arm bracket(H) on
the right side of the chair. Please pay
careful attention to the drawing to
be sure you have the correct arm
bracket for that side .Use 2bolts©
with washer (G)to fasten the arm
bracket to the side of the chair
.Tighten the bolts with the Allen
wrench provided(I).

G

C

B

F

E

C

G

I

Step2: Attach the right arm to the
chairusingthepartsshowninthe
illustration. The metal sleeve will
position itself inside the arm hole and
the large washer(F)should be between
the arm and the chair. Tighten the
bolts with the Allen wrench
provided(I).
When assembled correctly the arm
should pivot freely.

2266 216

Step3: Push the plastic caps(D)into
the bolts holes to finish the arm
assembly for that side. Repeat steps
1-3 for the left side of the chair.

2

D

HI

J

Insert pin(J)into closureStep4:

1

J

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone: [phone], In Europe, call [phone]

3