X Rockers 51353 User Manual

IMPORTANT: You must keep your original retail receipt as proof of purchase.

Thank you for purchasing the X ROCKER!

We know you will enjoy your X Rocker experience
as much as we do.

Welcome to the world of interactive audio. With
your new X Rocker you can now not only hear
your music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing
a game, you will become a part of it.

Get ready to experience sound as you never have!

CAUTION: IF YOU ARE EXPERIENCING HEART
RELATED PROBLEMS, PLEASE CONSULT WITH
YOUR DOCTOR BEFORE USING THIS PRODUCT.

Need Help? Email: [e-mail] Web: www.xfunctional.com
Phone: [phone], In the UK, call [phone] or [phone]

Please have this item number ready when contacting Customer Service: #51353

1

FEATURES

A-Control Panel

A1-Power Indicator Light of X-Rocker

A2-Audio Input Jack
A3-Wireless Band Switch of X-Rocker
A4-Volume Adjustment
A5-Bass Volume Adjustment
A6-Power On/Off Switch of X-Rocker
A7-9V DC Power Input Jack of X-Rocker
A8-Headphone Jack
A9-Audio Output Jack
A10-DC Power Input Jack of TX
A11-Audio Input Jack of TX
A12-Power On/Off Switch of TX
A13-Wireless Band Switch of TX

3V/200mA

2

A11

A12

A13

OFF/ON

123

BAND

AUDIO IN

Transmitter

B-Accessories Supplied with X ROCKER

B1-3m RCA Stereo male to 3.5mm stereo male cable (1 PC)

B2-INPUT:100-240V AC 50/60Hz

9.84ft/3m

0.492ft/0.15m

0.492ft/0.15m

B5

0.492ft/0.15m

B6

B7

*SOME PARTS MAY VARY SLIGHTLY

OUTPUT:9V DC 1000mA 9W Main POWER Adapter.
B3-RCA female to female barrel adapter (2 PC )
B4-0.15m RCA stereo female to 3.5mm stereo male cable (1PC)
B5-TX Box
B6-0.15m RCA stereo male to 3.5mm stereo male cable (1PC)
B7-3.5mm stereo male to 3.5mm stereo male cable (1PC)

C-Specification for X ROCKER

.The unit specifications:
Power output: Subwoofer: 3.5 W RMS
Satellite: 1.5WX2 RMS (THD=10%)
Signal-to-Noise Ratio(Amplifier):Subwoofer: 50dB Satellite: 60dB
Frequency Response: 60Hz~15kHz
Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz)
Input: DC 9V/1A

.TX / RX specification:

1) TX Power supply
2XAAA Batteries (BATTERIES ARE NOT INCLUDED )

2) TX Current: 40mA

3) RX Current: 20mA

4) TX Transmission distance: < 65.6 ft / 20 meters (No buildings
or other barriers)

5) Environmental temperature: 14 F~158 F / -10 ~70

6) Modulation mode: FSK

7) TX Work frequency: 863.3, 863.9 Mhz

8) RX Work frequency: 864.55 MHz

9) TX Power: 10dBM

10) RX Sensitivity:-100dBM

11) RX frequency range: 50Hz~13KHz

12) Second harmonic suppression: -40dB

13) Band quantity: 3 channels

3V DC/200mA

00

S

Need Help? Email: [e-mail] Web: www.xfunctional.com
Phone: [phone], In the UK, call [phone] or [phone]

DC IN DC 3V

A10

TROUBLE SHOOTING

- Unable to connect to game console -

Most game consoles are shipped from the manufacturers with an Audio/Video RCA cable. The A/V RCA cable has three
RCA plugs: a video plug (yellow) and two audio plugs (red and white). If your gaming console came with an A/V RCA cable.
please follow the instructions supplied by the manufacturer for setting it up and connecting it to the TV. Please note that
you must leave the red and white audio jacks on the A/V cable UNCONNECTED. Once the console is properly connected to
your TV, please follow the diagram in the illustrated X Rocker Set-up guide to connect the gaming console to the V Rocker.
If your gaming console was shipped with a coaxial cable, instead of an A/V RCA cable, you must follow an alternate set-up
procedure (coaxial cable is the same type of cable that is used to connect a VCR to a TV). You will quickly recognize if your
gaming console uses this type of cable. It connects the gaming console directly to the television and carries both the audio
and video signal over a single cable. If your gaming console uses a coaxial cable, you CAN NOT connect it directly to the
X Rocker. Instead, you have two alternatives:

1. Use an intermediary A/V device (such as a TV, VCR, DVD, TiVO, etc)
a. Connect your gaming console to the intermediary A/V device via the coaxial cable.
b. Connect the X Rocker to the 'Audio Out' jack on the intermediary A/V device. This allows an indirect connection
of the X Rocker to your gaming console, through the intermediary A/V device. To accomplish this successfully,
your intermediary A/V device MUST have both:
. A coaxial jack (the standard jack for TV cables that is found on most TVs , VCRs, DVD, TiVo, etc).
. An RCA audio output jack ('Audio Out' jack).
c. Follow diagram 2 in the X Rocker set-up guide to connect the X Rocker to the intermediary A/V device and
finalize the setup.

2. Purchase the A/V RCA cable for your console:
If your intermediary A/V device does not have an 'Audio Out' jack, you must contact the gaming console manufacturer/dealer
and request the 'Audio/Video RCA output cable' for your console. Please note that Ace Bayou Service Center does not supply
this cable for your console. You can obtain it only from the console manufacturer or an authorized dealer for your gaming
console.

- Unable to hear any sound from the X ROCKER -

1. Check to ensure that the power adapter is properly connected to the power jack (A7). When properly connected, the logo
(A1) on the control panel should light up when the power switch (A6) is turned on. If the logo (A1) does not light up, try
to use another power outlet in your home. When the TX box is switched on (A12) for use in wireless mode, the power
indicator light on its front panel should also light up. If the light is not on, please try changing the batteries in the TX.

2. Make sure the power unit is turned on and indicator light on the control panel is lit. If it is not, please press the power
switch on the control panel. When you use wireless mode, the power indicator light on the front panel of the TX box turns
green. If the light is not on, please turn on the power switch (A12) on the side. Check the BAND selector (A13) on the side
of the TX box and make sure the number selected is the same as the number selected on the BAND selector (A3) of the
control panel on the chair. For example, if the BAND selector on the TX box is on "1" make sure the BAND selector on the
control panel is also on "1".

3. Once you have successfully completed 1. and 2. please review the X Rocker illustrated set-up guide. Double check all
audio connections. Finally, check that the volume on the hand remote is turned to an audible level.

4. If you have successfully completed No.1-No.3 and you still cannot hear sound, try to connect another audio source
that works well, such as a CD player, a television, a VCR, another game console, etc.
Please be sure to go through steps 1 through 3 su
No.1-No.4, please contact Ace Bayou Service Center Via email [e-mail] or toll free [phone]
[phone] to request assistance.
Please go to www.xfunctional.com for answers to frequently asked questions.

ccessfully. If you fail to hear any sound after having completed steps

Need Help? Email: [e-mail] Web: www.xfunctional.com
Phone: [phone], In the UK, call [phone] or [phone]

3