X Rockers 06107 User Manual

Thank you for purchasing the X ROCKER!
We know you will enjoy your X Rocker experience
as much as we do.

Welcome to the world of interactive audio. With
your new X Rocker you can now not only hear
your music but actually FEEL it. Whether you are
listening to music, watching a movie, or playing
a game, you will become a part of it.

Get ready to experience sound as you never have!

IMPORTANT: You must keep your original retail receipt as proof of purchase.

HAVE THIS ITEM NUMBER READY WHEN CONTACTING CUSTOMER SERVICE: #06107

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

1

FEATURES

A-Control Panel

A1-Power Indicator Light
A2-Audio Input Jack
A3-

Wireless Band Switch
A4-Volume Adjustment
A5-

Bass Volume Adjustment
A6-Power On/Off Switch
A7-12V DC Power Input Jack
A8-Headphone Jack
A9-

Audio Output for linking multiple chairs
A10-DC Power Input Jack of TX
A11-Audio Input Jack of TX
A12-PowerOn/OffSwitchofTX
A13-

3V/200mA

Wireless Band Switch of TX

2

A11

OFF/ON

123…………

BAND

＜＜

3V DC/200mA

00

DC-12V/2A

9.84ft/3m

0.492ft/0.15m

0.492ft/0.15m

B5

0.492ft/0.15m

B7

*SOME PARTS MAY VARY SLIGHTLY

B6

A12

A13

B-Accessories Supplied

B1-3m RCA Stereo male to 3.5mm stereo cable (1 PC)
B2-

INPUT:100-240V AC 50/60Hz

OUTPUT:12V DC 2000mA 24W Main POWER Adapter.
B3-RCA female to female barrel adapter (2 PCS )
B4-0.15 RCA s to
B5-TX Box
B6-0.15m
B7-3.5mm stereo to (1PC)

C-Audio Specification

Ⅰ

Ⅱ

1) TX Power supply

2) TX Current: 40mA

3) RX Current: 20mA

4) TX Transmission distance: < 65.6 ft / 20 meters (No buildings

5) Environmental temperature: 14 F~158 / -10 ~70

6) Modulation mode: FSK

7) TX Work frequency: 2.4GHz

8) RX Work frequency: 2.4GHz

9) TX Power: 10dBM

10) RX Sensitivity:-100dBM

11) RX frequency range: 50Hz~13KHz

12) Second harmonic suppression: -40dB

13) Band quantity: 3 channels

m tereo female 3.5mm stereo male cable (1PC)

RCA stereo male to 3.5mm stereo male cable (1PC)

male 3.5mm stereo male cable

.The unit specifications:

Signal-to-Noise Ratio(Amplifier):Subwoofer: 50dB Satellite: 60dB
Frequency Response: 60Hz~15kHz
Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz)
Input: DC 12V/2A

TX / RX specification:

.

2XAAA Batteries (BATTERIES ARE NOT INCLUDED )

or other barriers)

＜

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

AUDIO IN

A10

DC IN DC 3V

male

＞＞

F

℃℃

FUNCTIONS:

Foldable construction for ease of storage and portability.
Side control panel with volume, bass control, input/output jacks, and band switch.
Ergonomic design with full back support.

Easy to clean heavy duty upholstery grade vinyl cover.

Wireless audio transmission

READ BEFORE USAGE:

Always make sure the backrest is locked before sitting in the chair.

Excessive use of audio equipment could lead to hearing loss.

Excessive sound pressure from earphones and headphones can cause hearing loss.
Children under the age of 13 should not use this product without adult supervision.
Strictly for indoor use. Do not expose to direct sunlight, moisture or extreme temperatures.
If the cover becomes wet, disconnect the power immediately and don't use until it is completely dry.
Do not attempt to remove the cover or any components. Removal of the cover or tampering with components puts
you at risk for injury or death from electrical shock.
When using in wireless mode connect the audio cable to the RX. Do NOT connect the audio input directly to the X Rocker
or the device will be DAMAGED.
The maximum input of the TX box is 1V. If the input is over 1V, the sound can become distorted or fuzzy. If the Sound
coming out of the chair is fuzzy at low volumes, lower the volume on the audio source (ex. The TV, Mp3,etc) and the
distortion should go away.
Do not mix alkaline, standard carbon-zinc, or rechargeable Ni-cad, NiMH, etc.
Do not mix old and new batteries.

SE T UP:

Lift the X Rocker out of the box .

Position the chair on the floor

Follow above diagrams to install the backrest.
Review the set-up diagrams to familiarize yourself with the X Rocker's components, accessories, and set-up.
When used in wireless mode, make sure that the control panel is not more than 65.6ft / 20 meters from the audio source and

6.5ft / 2 meters from a power source.
Unpack the power adapter, plug it into a power outlet and connect it to the power jack (A7) on the control panel.
Press the power button (A6) and confirm that the power indicator light (A1) is on. In wireless mode, turn on the power to the
TX box (A12), confirm that its indicator light is on, and check that the band selected on the TX box (A13) is the same as that
selected on the control panel (A3) of the X Rocker.
Follow the diagrams to connect the X Rocker to the audio source of your choice in wired or wireless mode.
Adjust the bass and volume levels to your preference start rocking.

…

Need Help? Email: [e-mail] Web: www.thexrocker.com
Phone:[phone], In Europe, call [phone]

3