Xp-pen Note Plus User Manual

Note Plus User Manual

Thank you for purchasing the Bluetooth Handwriting Tablet. Our product user
manual currently supports English, Russian, Japanese, German, Korean,
Chinese, Italian, Spanish, and French. We apologize if your preferred language
is not supported.

Product Overview

1. Multi-function button

2. Status indicator light

3. Hidden reset button

4. Power indicator light

5. Power port

6. Write/Sensor area

Note:
a. You must write on right side then data will be saved.
b. You can use general A5 size note.

How to connect Note Plus to smartphone?

1. Open Bluetooth function on smartphone.

2. The first-time connection, when status indicator light becomes Green, please click

multi-function button.

How to power on Note Plus?

Open Note Plus or press multi-function button. When turn on, the Blue indicator light
blinks slowly.

Writing mode

When writing, the indicator light becomes Green.

Data translation mode

When Note Plus connects with smartphone, the blue indicator light from blinks to on,
the data will translate to smartphone on time.

Import offline data

When Note connects with smartphone and open XP-Pen Note Plus App. On the first
page, drop down then choice import offline data. When importing, the Blue indicator
light blinks fast.

Go to the next page mode

You can click multi-function button to go to the next page when Blue indicator light
blink 3 times,

Default

Press and hold multi-function button about 10 seconds to go back to default.

Note:
When do it, all of the data and setting will be recovering.

Reset mode

When Note Plus gest some of problems, you can click Hidden reset button. When you
do it, it won’t delete data.

Power indicator light

Red Blinks, low battery
Red On, are charging
Green On, full charge

Replace pen tip

Use pen clip to clip pen tip then pull out then pug a new pen tip into.

Power cable

The power cable developed from XP-Pen magnetic charging cable.

Write/Sensor area

You must write on right side then data will be saved.

If you have any questions, please contact us at:
Web: www.xp-pen.com
Email: [e-mail]

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be

used in portable exposure condition without restriction.