XPower P-80A, P-130A, P-450AT, P-230AT-Gr User Manual

Air Mover Owner's Manual

Air Mover Manual De Usuario (página 10)

Air Mover Mode d'emploi (page 20)

Model / Modelo / Modèle:

P-80 Series, P-100 Series, P-130 Series

P-200 Series, P-230 Series

(115V 60HZ)

Read and save these instructions

Lea y guarde estas instrucciones

Lisez et enregistrez ces instructions

www.xpower.com | 1-(855)-855-8868 | [e-mail]

Index: NA-1-A2

Edition: 1.7.Final

Safety Instructions

!

WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT.

The user of electrical products may create hazards that include, but are not limited to
injury, fire, electrical shock. Failure to follow these instructions may damage and/or
impair its operation and void the warranty.

•Before operating, remove all packaging material and check for any damage that may
have occurred during shipping or any missing items.

•Check household power supply to ensure it matches the appliance’s specification.

•DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an

authorized service facility for examination and/or repair.

•Use only on GFCI protected receptacles. Please contact a qualified electrician for
verification and / or installation of a GFCI receptacle if necessary.

•DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or
similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.

•To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state
speed control device.

•DO NOT touch this appliance or the plug with wet hands or while standing in water.

•DO NOT operate the appliance in any pooled water.

•DO NOT use the product in areas where gasoline, paint or other flammable goods and

objects are used or stored.

•DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may
damage the appliance and void the warranty.

•DO NOT cover the air inlet or outlet on the appliance.

•DO NOT direct the air flow at human faces or bodies.

•DO NOT allow children to play around or with this appliance.

•AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from

power supply before servicing.

•Remove the power cord from the electrical receptacle by grasping and pulling on the
power cord plug-end only, DO NOT pull the cord directly.

•DO NOT attempt to repair or adjust any electrical or mechanical functions of this
appliance, as this may cause danger and void the warranty.

•If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the
product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.

•Store in a dry area, away from exposure to sunlight, extreme temperature and humidity,
or other extreme environments, when not in use.

•DO NOT stack more than four units of this appliance.

•An electronic instruction manual can be obtained through manufacture’s website www.

xpower.com.

Items Included

•Air Mover x 1 •Owner’s Manual x 1

Parts Description

(1) (2) (3)

(10) (11) (12) (13) (14) (15)

(1) Inlet Grille Cover (Motor

Side)
(2) Left Housing
(3) Capacitor
(4) Motor
(5) Bushing

(4) (5) (6) (7) (8) (9)

(6) Fan
(7) Switch Plate
(8) Right Housing
(9) Inlet Grille Cover (Fan

(10) Rubber Feet

Side)

Air Mover Owner's Manual

XXX Manual De Usuario (página 10)

XXX Mode d'emploi (page 18)

Model / Modelo / Modèle:

P-80 Series, P-100 Series, P-200 Series

(115V 60HZ)

Read and save these instructions before use

Lea y guarde estas instrucciones antes de usar la unidad

Lire et conserver ces instructions avant utilisation

www.xpower.com | 1-(855)-8868 | [e-mail]

Index: NA-1-A2

Edition: 1.0.Alpha

(11) Rubber Feet
(12) Power Cord
(13) Outlet Grille Cover
(14) Kick Stand
(15) Rubber Feet

English - 2 English - 3

Air Mover Introduction

•The XPOWER Air Mover produces a plentiful
airflow capacity for small to large jobs for any
location size.

•It is ideal for drying tight spaces such as crawl
spaces, under counters, inside cabinets,
bathrooms, auto interiors, and more.

•It’s also designed for professional carpet
cleaning, water damage restoration jobs, or
home use.

Operation Guide

Drying A Floor

Switch Plate

Speed Switch

•Turn to “OFF” position
to switch the air mover
OFF. Turn to any speed
position to switch the
air mover ON.

•Turn clockwise to set
the desired fan speed.

•There are 3 fan speeds
from: 1, 2, 3. “1” is the
lowest speed and “3”
is the highest speed.

OFF

180

Timer Switch*

0

ON

60

•Turn clockwise to set timer
for minutes count down to
an automatic stop.

120

1

2

3

•The timer can be set for
up to 180 minutes (3
hours).

•When the timer reaches
“0” position, the unit
stops working. On “ON”
position, it will work
constantly.

Drying A Wall Or Ceiling

20° 45°90°

Single Unit:

Place the air
mover at the
corner to create
circular airflow.

Multiple Units:

Place the air
movers at four
corners to create
circular airflow.

Multiple Operating Positions:

The air can operate at different
positions, directing the airflow to
desired areas.

* The timer switch function does not apply to all models mentioned in this manual.

Additional Electrical Receptacle (Daisy Chain)

Reset Button

CIRCUIT

12A

BREAKER

TOTAL OUTPUT
12 AMPS MAX WITH THIS UNIT OFF

9.5 AMPS MAX WITH THIS UNIT ON

Electrical Receptacle

•Other appliances can be plugged in the additional electrical receptacles and work
whether the air mover is on or off. However, the total amperage must be lower than the
amperage instructed. Different models may have varying instructions.

•If the air mover or the plugged in appliance stops working, press the RESET BUTTON
to reset the circuit.

English - 4 English - 5