XPower P-200T, P-200AT, P-230AT Owner's Manual

P-200T / P-200AT / P-230AT (115V / 60Hz)

XPOWER Mini Air Movers are certified professional level multifunctional utility blower fans with the most efficient engineering design

Features:

• Low power draw with high velocity air flow from 600 to 800 CFM

• Super quiet motor and super lightweight

• Easy carrying handle and stackable up to 4 units high.

• Easy and quick to disassemble for thorough cleaning and service.

• Safety certified 10' power cord.

• Easy cord wrap on handle.

• 3-hour timer.

• 3-speed switch.

• Durable and rugged housing.

• 4 air flow positions (0°, 20° Kickstand, 45° and 90°).

45°

XPOWER Mini Air Movers are intended to move air and to dry small areas where the large air mover is not

applicable such as crawl spaces, inside cabinets, under counters, inside ceilings, basements, etc. The Mini Air Mover can also be used as high velocity fan for household indoor/outdoor use.

1. XPOWER Mini Air Movers are shipped ready-to-use. Prior to plugging the unit into the power source, inspect completely for any shipping damage.

2. Plug the electrical cord into the power outlet.

3. Carefully place the Mini Air Mover unit on a stable, flat dry surface.

4. The unit is capable to be used at 4 different angles to direct air flow.

5. Turn the switch to desired speed and make sure unit operates normally.

6. Mini Air Movers in operation must be supervised at all times.

Air Movers can be stacked (up to 4) on their sides for storage.

NOTICE:

Stacking feature is not secure for transportation.

(For P-200AT & P-230AT models)

TM

1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water.

2. To avoid risk of injury, do not direct air flow at face or body.

3. To reduce the risk of fire or electric shock, do not use the Mini Air Mover with any solid-state speed control device.

4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.

5. Do not operate the Mini Air Mover with a damaged cord or plug. Discard the unit or return it to an authorized service facility for examination and/or repair.

6. Unplug the Mini Air Mover from the power supply before servicing or cleaning.

7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.

8. Do not allow children to play with or around the Mini Air Mover at any time.

9. Do not move or carry the Mini Air Mover while unit is operating.

10. Mini Air Movers in operation must be supervised at all times.

Air Mover vibrates

1. To keep the Mini Air Mover clean, use a damp cloth to wipe the surface of the housing.

2. Never clean the Mini Air Mover with water.

3. When not in use, unplug and store the Mini Air Mover in a dry indoor place out of reach of children.

4. Always disconnect the Mini Air Mover from its power source before performing any maintenance or cleaning.

Model P-200T P-200AT P-230AT

Volt / Frequency 115V / 60Hz 115V / 60Hz 115V / 60Hz

Power 1/8 HP 1/8 HP 1/5 HP

Amp 1.5 Amps 1.5 Amps 2.3 Amps

Rated Airflow (On High) 600 CFM 600 CFM 800 CFM

RPM (Low / Medium / High) 1100 / 1250 / 1500 1100 / 1250 / 1500 1000 / 1250 / 1500

Speeds Three Three Three

Built-In Power Outlet / Daisy Chain No Yes Yes

3-Hour Timer Yes Yes Yes

Positions 4 (0°, 20° Kickstand, 45°, 90°) 4 (0°, 20° Kickstand, 45°,

90°) 4 (0°, 20° Kickstand, 45°, 90°)

Unit / Box Weight 8.5 Lbs. / 9.7 Lbs. 8.7 Lbs. / 9.9 Lbs. 9.9 Lbs. / 11.1Lbs.

Unit / Box Size (L x W x H) 10.7”x12.4”x13.3” / 13.6”x12.8”x11” 10.7”x12.4”x13.3” / 13.6”x12.8”x11” 10.7”x12.4”x13.3” / 13.6”x12.8”x11”

Power Cord (Length/Size) 10’/18AWG 10’/14AWG 10’/14AWG

Overheating Protection Thermally Protected Thermally Protected Thermally Protected

Housing Injection Mold / Polypropylene (PP

) Injection Mold / Polypropylene (PP) Injection Mold / Polypropylene (PP)

Safety Certificates ETL / C-ETL ETL / C-ETL ETL / C-ETL

Call for a Return Merchandise Authorization (RMA) number through Service Department and obtain ship back instructions. Have original proof of purchase. Use original none damaged packaging or Industrial certified packaging method.

A.

B. C.

This Warranty does not cover signs of misuse including, but not limited to, a unit that has been dropped, subjected to water damage, tampered with, improper voltage use and unauthorized maintenance and repairs. The POWER CORD is not covered by the warranty.

XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one way shipping.

200 Series Parts List

Capacitor

1

3

5

7

9

11

13

15

2

6 8

10 12

14

Timer & Switch Plate

4-1 & 4-2 Switch Knob & Timer Knob

4-2

4-1

15

More XPOWER products available:

Air Movers 400 Series: P-400, X-400, X-400A, X-430TF 600 Series: P-600, X-600, X-600A, P-630, X-630 800 Series: P-800(H), X-800(H), X-800TF(H), P-830(H), X-830(H)

Force Dryers & Wall Dryer

B-3J, B-5J, B-5W

Blowers

BR-2C01A, BR-201A, BR-232A, BR-252A, BR-282A

Axial Fan X-41ATR

Pet Dryers

B-2, B-3, B-4, B-5, B-16, X-430TF+MDK, X-800TF+MDK

220~240V models are also available for oversea markets. please check our website XPOWER.WS for more detail...

Please complete and mail or fax this form for your product warranty. For multiple units, please list serial numbers on a separate sheet of paper. Address: XPOWER MANUFACTURE, INC, 220 Clary Avenue San Gabriel, CA 91776, USA Tel: (626) 285-3301; Fax: (626) 285-3302

Company Name / Contact Person / Title

State / Province

Zip Country