XPower A-2 Owner's Manual
XPOWER
®
Electric Duster Owner's Manual
Fluffier° Electric° Manual de Usuano
Depoussiereur Electrique Manuel d'emploi
Model / Modelo / Modele:
A-2
(115V 60HZ)
Read and save these instructions
Lea y guarde estas instrucciones
Lisez et epargnez ces instructions
Intertek
www.xpower.com
I 1-(855)-855-8868 I info@xpower.com
Index: NA-1 83
Edition: 1.5.Fina I
L
WARNING - READ AND SAVE THESE INSTRUCTIONS BEFORE USING THIS
PRODUCT.
The user of electrical products may create hazards that include, but are not limited to
injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair
its operation and void the warranty.
•
Before operating. remove all packaging material and check for any damage that may
have occurred during shipping or any missing items.
•
Check household power supply to ensure it matches the appliance's specification.
•
To reduce the rink of electric shock, this appliance has a polarized plug (one blade is
wider than the other). This plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug.
If it
still does not fit, contact a
qualified electrician.
DO NOT
change the plug in any way.
•
DO NOT
use with damaged cord or plug. If the appliance is not working as it would, or
has been dropped, damaged, left outdoors, or dropped into water, return it to a service
center,
•
DO NOT
pull or carry by cord, use cord as a handle, close a door on cord, or pull cord
around sharp edges or corners.
•
DO NOT
run appliance over cord. Keep cord away from heated surfaces.
•
The unit's electrical cord cannot be replaced. If the cord is damaged, the appliance
should not be used further.
•
DO NOT
touch this appliance or the plug with wet hands or while standing in water.
•
DO NOT
allow to be used as a toy. Close attention is necessary when used by or near
children.
•
DO NOT
leave appliarce when plugged in. Unplug from outlet when not in use and
before servicing,
•
Turn off all controls before unplugging. Remove the power cord from the electrical
receptacle by grasping and pulling on the power cord plug-end only.
DO NOT
pull The
cord directly.
•
Use only as described in this manual. Use only manufacturer's recommended
attachments.
•
DO NOT
put any object into openings.
DO NOT
use with any opening blocked; kecp free
of dust, lint, hair, and anything that may reduce air flow.
•
Keep hair, loose clothing, fingers and all parts of body away from openings.
•
Use extra care when cleaning on stairs.
•
If the appliance Is damaged or it malfunctions,
DO NOT
continue to use it. Unplug the
product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.
•
Store in a dry indoor area, away from exposure to sunlight, rain, extreme temperature
and humidity, or other extreme environments, when not in use.
•
Arm electronic instruction manual can be obtained through manufacturer's website gegyu
>mower. QOM.
Special
lastructiohe
This product is ETL/C.ETL certified.
•
The ETL (Electrical Testing Laboratory) Listed Mark is proof that this product has been
independently tested and meets the applicable published safety standard of North America.
A
EletrIc Motor Driven Tools:
(1)
Sparks
(1.1) Sparks may be visible on occasion due to the electric motor. Various factors may
cause this such as prolonged or intensive use, foreign objects or an imbalanced
motor.
(1.2)
PO NOT
use this product around flammable or explosive materials such as gas, oil
and chemicals. Sparks can igpite these materials and cause fire.
(1.3) Occasionally small amounts of sparks are safe if away front flammable or explosive
materials. Please follow the instructions of the troubleshooting guide. (5._Paae12.1.
Troubleshooting Cu/dc)
(1.4) If the amount of sparks exceeds the safe range, a thermal protection fuse will stop
this product completely. Please contact XPOWER or other parties authorized
by
XPOWER for further instructions.
(1.5) If sparks continue or you have a
large
amount of sparks, we will consider your
machine as a defective unit Please stop IASI ng immediately and contact XPOWER or
Other parties authorized by XPOWER for return or further instructions.
(2)
Temperature Level
(2.1) This product generates heated air from the powerful motor After prolonged use, the
airflow and the machine surface can reach nigh temperature levels.
12.2) Please be aware Mat the objects under high temperatures can be damaged. Follow
the instructions of the troubleshooting guide. tovu.ei2t
Troubtesbootiv
Guide)
(2.3) If thetemperature exceeds the safe range, a thermal protection fuse will shut
down the unit automatically. Please contact XPOWER or other parties authorized by
XPOWER for further instructions.
(3)
Noise Level
(3.1) This product uses a high RPM (Revolutions Per Minute) motor to provide powerful
airflow and can create a high level of noise.
(3.2) Please follow the instructions of the troubleshooting guide. (See Page 12_
Troubleshooting_Ouicie)
A
if you drop this product:
(1)
Before the next usage, please point to a safe area and turn on the unit with the low speed
setting for 5 minutes. And then switch to the higher speed setting for another 5 minutes.
(2)
If you experience abnormal sparks, temperature or noise level occur during the above
operation, please immediately stop using and contact XPOWER or other parties authorized
by XPOWER for further instructions.
English -2
English -3
English -4
English. 5
•
The XPOWER Electric Duster produces a powerful airflow for
endless applications with various nozzle attachments.
•
Its ideal to dust, pump air, and dry a variety of surfaces with its
power and flexibility.
•
With a high pressure airflow, it's also designed to help drying a
bathed pet in your home.
Cl
Electric Dusters 1
Nozzle Att hrnrents 9
n
•
Owners Manual x
•
Nozzle Pouch x1
7TTij
17
9
8
/
12
13
(1)
Housing
(8) Standard Nozzle
Adapter
(2)
Air Cutlet
(9) Standard Brush
13.2) Boston Valve
(3)
Air Inlet
(10) Detail Brush
Adapter
(4)
Filter
(11) Strew Adapter
(13.3) Stem Voice
(5)
Speed Switch
(12) Tapered Flow Nozzle
Adapter
6) Handle
(13) Air Pump Adapter set (14) Power Cord
(7) Air Blade Nozzle
(13.1) Wide Valve
Standard Nozzle
•
The standard nuzzle can be used
alone. Attach the standard nozzle to
the air inlet of the electric duster,
•
Push and fasten the nozzle.
Standard Brush
•
The standard brush must be attached
onto the standard nozzle.
2
11
Nozzle Installation
(See Pare
4 Parts Descrition)
Loading...