XPiQ inc PUP56-12, PUP56-13, PUP56-13-1, PUP56-14, PUP56-16 Datasheet

96

DESCRIPTION

The PUP56 Series of AC/DC switching power supplies
provide 55 watts of continuous output power. They are
enclosed in a 94V-1 rated polyphenylene-oxide case
with an IEC320 inlet connector to mate with an
interchangeable cord for worldwide use. All
models meet CISPR 22 and FCC Class B
emission limits, and comply with UL,
CSA, IEC and CE requirements.

FEATURES

• Built-in EMI filter

• Overvoltage protection

• Overcurrent protection

• Input surge current protection

• Wide input voltage 85 to 264 VAC

• 100% burn-in at full load

•

Optional on/off switch

Output Maximum

Output

Model Vnom Imin Imax Tol. Power

PUP56-12 12V 0A 4.2A 3% 50W
PUP56-13 15V 0A 3.7A 3% 55W
PUP56-13-1 18V 0A 3.1A 3% 55W
PUP56-14 24V 0A 2.3A 3% 55W
PUP56-16 30V 0A 1.9A 3% 55W
PUP56-17 36V 0A 1.6A 3% 55W
PUP56-18 48V 0A 1.2A 3% 55W

OUTPUT VOLTAGE/CURRENT RATINGS CHART

NEW • DESKTOP POWER SUPPLIES

• UNIVERSAL INPUT

• COMPACT FORM FACTOR

®

International Power Sources, Inc.

55 WATT

SWITCHING

POWER SUPPLY

U

L

®

97

GENERAL SPECIFICATIONS

All specifications are typical at nominal line, full load, and 25°C.

Efficiency: 75% minimum
Hold-up time: 10msec minimum at 110 VAC
Line regulation: ±0.5% maximum at full load
Inrush current: 15A@115 VAC or 30A@

230 VAC at 25°C cold start

Withstand voltage: 3000 VAC from input to output

1500 VAC from input to ground
500 VAC from output to ground

Insulation resistance: 10 Mohm minimum from output

to ground
Operating temperature: 0°C to 60°C*
Storage temperature: –40°C to +85°C
Relative humidity: 5% to 95% non-condensing
MTBF: 100,000 hours minimum at

full load at 25°C ambient
EMI requirements: In compliance with radiated and

conducted limits of CISPR 22

(EN 55022) Class B and FCC Class B
Safety requirements: Approved to:

a) UL 1950

b) CSA C22.2 No. 234

c) IEC 950 (EN60950)
Switching frequency: 85KHz ±10KHz

INPUT SPECIFICATIONS

Input voltage: 85 to 264 VAC
Input frequency: 47 to 63 Hz
Input current: 1.22A (rms) for 115 VAC

0.76A (rms) for 230 VAC
Safety ground 0.47mA max. @ 110VAC 60 Hz
leakage current: 0.85mA max. @ 240VAC 50 Hz

OUTPUT SPECIFICATIONS

Total output power: See Rating Charts
Ripple and noise: 1% peak to peak maximum
Overvoltage protection: Set at 112-132% of

nominal output voltage

Overcurrent protection:

Protected under short circuit conditions
Temperature coefficient: ±0.04%/°C maximum
Transient response: Maximum excursion of 4% or better

on all models, recovering to 1% of

final value 500us after a 25% step

load change

* Derate linearly from 100% load at 40°C to 50% load at 60°C

PIN CHART

Model PIN 12345

PUP56-12 PUP56-13
PUP56-13-1 PUP56-14 RETURN RETURN OUTPUT RETURN OUTPUT
PUP56-16 PUP56-17 +V +V
PUP56-28

NOTES: 1. Dimensions shown in inches (mm) 3. Optional output connectors available 5. Weight: 500 grams

2. Tolerance 0.02 (0.5) maximum 4. Optional on/off switch

Your Source of Power ...

260 Hopping Brook Road, Holliston, MA 01746

TEL: [phone] FAX: [phone]

http://www.intlpower.com

International

Power Sources, Inc.