XPiQ inc PCM50UD00, PCM50UD01, PCM50UD02, PCM50UD03, PCM50UD04 Datasheet
...
•
•
4000 VAC Isolation
•
Low Leakage Current
•
Single, Dual & Triple Outputs
•
Approved to International
Medical Safety Standards
•
Both Line and Neutral Fused
•
Low Voltages Available
Input
Input Voltage • 90-264 VAC
Input Frequency • 47 to 63 Hz
Input Current • 1.35A max at 115 VAC,
0.7 A max at 230 VAC
Inrush Current • 15 A at 115 VAC or 30 A at 230 VAC
at 25°C cold start
Leakage Current • 0.1 mA max at 230 VAC, 50 Hz
Output
Output Voltage: • See Tables
Output Power Range • Up to 50 Watts
Minimum Load • No minimum load for single output
models - See Table for multi output
models
Line Regulation • ±1% maximum at full load
Load Regulation • ±3% typical
Ripple and Noise • 2% pk to pk max
Transient Response • 4% maximum deviation, 400 µs
recovery time for a 50% load change
Temperature • All outputs ±0.04%/°C max
Coefficient
Hold Up Time • 16 ms minimum at low line
Overvoltage • 112-132% with auto recovery
Protection
Overcurrent • 110-150% with auto recovery
Protection
General
Efficiency • 80% min for single output models,
75% min for multi output models
Isolation Voltage • 4000 VAC input to output
1500 VAC input to ground
500 VAC output to ground
Insulation Resistance • 50 Mohm min from output to ground
MTBF • 100,000 hours min at full load &
25 °C ambient to MIL-HDBK-217F.
Size • 5.75” x 2.99” x 1.69”
Weight • 400-550 g approx
Environmental
Operating • 0 °C to +70 °C,
Temperature derate linearly from 100% load at
+50 °C to 50% load at +70 °C
Storage • -40 °C to +85 °C
Temperature
Relative Humidity • 5-95% non-condensing
EMC & Safety
Safety Approvals • Approved to UL 2601,
CSA C22.2 No. 601-1 per cUL
& EN60601
EMI/EMC • Meets conducted & radiated
limits of CISPR11 Class B and
EN55011 Class B
50 Watts
PCM50 Series
AC/DC Medical Desktop
Specification
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Intelligent Design Quality Product
XPiQ inc.
Maximum Output Output Total
(1)
Model
Output Power Voltage Current Regulation Number
30 W 2.5 V 12.00 A 7% PCM50US2V5
40 W 3.3 V 8.00 A 5% PCM50US3V3
40 W 5.0 V 8.00 A 5% PCM50US05
42 W 7.0 V 6.00 A 5% PCM50US07
45 W 9.0 V 5.00 A 4% PCM50US09
45 W 12.0 V 3.75 A 3% PCM50US12
45 W 15.0 V 3.00 A 3% PCM50US15
50 W 18.0 V 2.77 A 3% PCM50US18
50 W 24.0 V 2.08 A 2% PCM50US24
50 W 28.0 V 1.78 A 2% PCM50US28
50 W 36.0 V 1.38 A 2% PCM50US36
50 W 48.0 V 1.04 A 2% PCM50US48
PIN CONNECTIONS
Pin SINGLE DUAL TRIPLE
1 Common Common Common
2 Common Common Common
3 Output Output 1 Output 1
4 Common Common Output 3
5 Output Output 2 Output 2
NOTES:
1. Dimensions shown in inches (mm).
2. Tolerance 0.04 (1.0) maximum.
3. Cable length is 48.0” approx.
4. For mating connector, use standard
5 Pin Din 180° socket.
5. Optional output connectors available,
contact sales office.
6. Weight: 400-550 g approx.
7. Multi output models include a ferrite bead
on the output connector.
3
5
2
4
1
•
•
•
•
•
Pin #
Mechanical Details
OUTPUT VOLTAGE & CURRENT RATINGS - MULTI OUTPUT MODELS PCM50
Output Output 1 Output 2 Output 3 Model
Power Vnom Imin Imax Reg
(1)
Vnom Imin Imax Reg
(1)
Vnom Imin Imax Reg
(1)
Number
26.5 W +3.3 V 1.0 A 5.0 A 7% +5.0 V 0.4 A 2.0 A 5% PCM50UD00
40 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% PCM50UD01
35 W +5.0 V 0.2 A 5.0 A 5% -5.0 V 0.2 A 2.0 A 5% PCM50UD02
42 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% PCM50UD03
42 W +5.0 V 0.5 A 5.0 A 5% +15.0 V 0.2 A 1.5 A 6% PCM50UD04
42 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% PCM50UD05
42 W +5.0 V 0.5 A 5.0 A 5% -24.0 V 0.1 A 1.0 A 5% PCM50UD06
42 W +12.0 V 0.5 A 3.0 A 5% -12.0 V 0.2 A 1.0 A 5% PCM50UD07
42 W +15.0 V 0.5 A 2.0 A 5% -15.0 V 0.2 A 1.0 A 5% PCM50UD08
42 W +5.1 V 0.0 A 5.0 A 5% +7.2 V 0.2 A 2.6 A 5% PCM50UD10
42 W +10.5 V 0.2 A 2.0 A 5% -10.5 V 0.2 A 2.0 A 5% PCM50UD11
42 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% -5 V 0 A 0.8 A 5% PCM50UT01
42 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% -12 V 0 A 0.8 A 5% PCM50UT02
42 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -5 V 0 A 0.8 A 5% PCM50UT03
42 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -12 V 0 A 0.8 A 5% PCM50UT04
42 W +5.0 V 0.5 A 5.0 A 5% +15.0V 0.2 A 2.0 A 6% -15 V 0 A 0.8 A 5% PCM50UT05
42 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -12 V 0 A 0.8 A 5% PCM50UT06
42 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -24 V 0 A 0.5 A 5% PCM50UT07
OUTPUT VOLTAGE & CURRENT RATINGS - SINGLE OUTPUT MODELS PCM50
1. Total regulation includes tolerance, line regulation and load regulation.
Notes
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Rev 1.0
Loading...