•
•
4000 VAC Isolation
•
Low Leakage Current
•
Single, Dual & Triple Outputs
•
Approved to International
Medical Safety Standards
•
Both Line and Neutral Fused
•
Low Voltages Available
Input
Input Voltage • 90-264 VAC
Input Frequency • 47 to 63 Hz
Input Current • 1.35A max at 115 VAC,
0.7 A max at 230 VAC
Inrush Current • 15 A at 115 VAC or 30 A at 230 VAC
at 25°C cold start
Leakage Current • 0.1 mA max at 230 VAC, 50 Hz
Output
Output Voltage: • See Tables
Output Power Range • Up to 50 Watts
Minimum Load • No minimum load for single output
models - See Table for multi output
models
Line Regulation • ±1% maximum at full load
Load Regulation • ±3% typical
Ripple and Noise • 2% pk to pk max
Transient Response • 4% maximum deviation, 400 µs
recovery time for a 50% load change
Temperature • All outputs ±0.04%/°C max
Coefficient
Hold Up Time • 16 ms minimum at low line
Overvoltage • 112-132% with auto recovery
Protection
Overcurrent • 110-150% with auto recovery
Protection
General
Efficiency • 80% min for single output models,
75% min for multi output models
Isolation Voltage • 4000 VAC input to output
1500 VAC input to ground
500 VAC output to ground
Insulation Resistance • 50 Mohm min from output to ground
MTBF • 100,000 hours min at full load &
25 °C ambient to MIL-HDBK-217F.
Size • 5.75” x 2.99” x 1.69”
Weight • 400-550 g approx
Environmental
Operating • 0 °C to +70 °C,
Temperature derate linearly from 100% load at
+50 °C to 50% load at +70 °C
Storage • -40 °C to +85 °C
Temperature
Relative Humidity • 5-95% non-condensing
EMC & Safety
Safety Approvals • Approved to UL 2601,
CSA C22.2 No. 601-1 per cUL
& EN60601
EMI/EMC • Meets conducted & radiated
limits of CISPR11 Class B and
EN55011 Class B
50 Watts
PCM50 Series
AC/DC Medical Desktop
Specification
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Intelligent Design Quality Product
XPiQ inc.