Xo Ventilation XOA30S Owners Manual

XOA30 XOA36

READ AND SAVE THE INSTRUCTIONS

FOR RESIDENTIAL COOKING ONLY

Dear Customer, If you follow the recommendations contained in this Instruction Manual, our appliance will give you constant high performance and will remain efficient for many years to come.

CONTENTS

WARNING & CAUTION CHARACTERISTICS INSTALLATION & USE MAINTENANCE & CLEAN

Produc t Specifica tion & Technical Pa rameters

Rated Voltage

Rated Power Frequency

Light Power

Motor Power

Total Power

Motor

Parameters of Ducting Outlets Options

Ampere

Mounting height

120V

60Hz

2x20W High Efficiency Bulbs

2x130W

300W

- 6" Round Vertical Duct

- 3 1/4" x 10" Rectangle Vertical Duct

- 3 1/4 x 10" Rectangle Horizontal Duct

2.5 Amps

26” to 32” from cooking surface

XO How Beautiful Kitchens Breath

1 2

round

lengt h)

WARNING

TO RUDUCE THE RICK OF FIRE, ELECTRIC SHOCK OR INJURE TO PERSONS,

PLEASE OBSERVE THE FOLLOWINGS:

1. Installation work and electric wiring (including switch location) must be done by the

qualified person(s) in accordance with local applicable codes and standards, including fire-

rated construction.

2. This hood may have sharp edges. Be careful to avoid cuts and abrasions during installation

and cleaning.

3. The hood must be placed at a minimum distance of 26” and a maximum of 32” from the

cooktop for best capture of cooking impurities and a minimum distance of 28” from gas

range.

4. Provide sufficient air for proper combustion and exhausting of gases through the chimney

of the burning equipment to prevent back drafting. Follow the heating equipment

manufacturer’s guideline and safety standards such as those published by the National Fire

Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air

Conditioning Engineer (ASHRAE), and the local code authorities.

5. Ducted fans must always be vented to the outdoors.

6. This appliance is design to be operated by adults. Children should not be allowed to temper

with the controls or play with this appliance.

7. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed

control device.

8. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other

hidden utilities.

9. Before servicing or cleaning unit, switch power off at service panel and lock the service

disconnecting means to prevent power from being switched on accidentally. When the

service disconnecting means cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

10.Use this unit only in the manner intended by manufacturer. If you have questions, please

contact the manufacturer or local agent.

11.This unit must be grou nd ed .

and ASHRAE.

WARNING-TO REDUCE THE RISK OF FIRE, USE ONLY THE METAL DUCTWORK.

3 4

+ 5 hidden pages