XIGMATEK CD901 User Manual
APACHE
CD901 / 903
Accessories
1 2 3 4
Bracket x 1
PUSH-PIN Female x 4LGA775/1155/1156
INSTALLATION GUIDE
PUSH-PIN Male x 4
Thermal grease X 1
INTEL INSTALLATION
STEP 1
( LGA 775 / 1155 / 1156 )
CPU
Tear the package off the thermal grease,
apply thermal grease evenly to the bottom
of the heatsink.
STEP 2
Use the INTEL PUSH-PINS to fix the “INTEL LGA775/1155/1156 Bracket” on the motherboard.
A. LGA775: B. LGA1155/1156:
Thermal Grease
AMD INSTALLATION
( K8 / AM2 / AM3 / FM1 )
STEP 1
Tear the package off the thermal grease,
apply thermal grease evenly to the bottom
of the heatsink.
STEP 2
Remove the blister and sticker from the bottom
of cooler；Position the mounting clip to either
side of the Retention Module.
STEP 3
Press the other side of mounting clip until it is securely
fastened. Connect the power connector.
CPU
Thermal Grease
STEP 3
Remove the blister and sticker from the bottom of
coolerΙPosition the mounting clip to either side of
STEP 4
Press the other side of mounting clip until it is securely
fastened. Connect the power connector.
the Retention Module.
WARING
Keep and store product away from children.
Check the component list and condition of the product before installation. If there is any problem,
contact the shop where you purchased the product to get a replacement or refund.
Xigmatek Co., Ltd. is not responsible for any incidental damage, including but not limited to,
improper use, and problems with electrical power, accident, neglect, alteration, repair, improper
installation, and improper testing.
Incorrect installation may damage the cooler, CPU, and motherboard.
http://www.xigmatek.com
2012 © XIGMATEK Co., Ltd. All rights reserved. All trademarks are the property of their respective owners.
E-mail: support@xigmatek.com
sales@xigmatek.com
•
Loading...