Mi Motion-Activated Night Light
User Manual
Product overview
Lock
Alignment mark
IR sensor
Lamp
Front
Back
Brightness adjustment switch
3 AA batteries
(＊Batteries are not supplied with this
product. Buy batteries separately.)
Back cover
Hook
Using the night light
01 Open the back cover
a. When you're using he night light for the first
time, rotate the back cover counterclockwise to open it, then install 3 AA batteries.
02 Adjusting brightness
b. If the back cover is attached to a surface,
rotate the night light counterclockwise to
open it.
0.7lm 3.8lm
03 Locking the back cover
a. Align the mark with the “ ” icon, place
the cover on the night light, and rotate
the cover until the “ ” icon is aligned
with the mark.
b. Align the marks on the night light and the inside
of the back cover, then rotate the night light
clockwise.then rotate the night light clockwise.
04 Attaching the night light to a surface
a. Remove the protective film from the back cover and attach the night light to a surface.
b. Stick the hook to the back cover to hang the night light.
* The optimal distance from the floor is 0.4m - 1m. Make sure the alignment mark points directly
upwards so that motion detector could work properly.
05 When motion is detected in the dark, the night light will turn on auto- matically for
15 seconds.
* The night light detects motion from the distance of up to 5-7 meters in the front and
2-3 meters on its sides. Its operating angle is 120°. Motion detection efficiency
depends on the room temperature, shape of the object, and speed of the movement.
2-3m
5-7m
120°
Motion detection range
Don't forget
1. The night light detects motion from the distance of up to 5-7 meters in the front and 2-3 meters
on its sides. Its operating angle is 120°. Motion detection efficiency depends on the room
temperature, shape of the object, and speed of the movement.
2. Don't cover the motion sensor. Clean the night light with a soft cloth. Don't use corrosive solvents.
3. Don't install the night light near heat sources (air conditioners, radioators, humidifiers, etc.). Avoid
direct sunlight.
4. When you install the night light, make sure the logo in the front isn't tilted.
5. After a certain period of time, the night light's brightness will decrease. This means that the
batteries inside are going low. Replace the batteries and bring the old ones to your local recycling
station.
Safety precautions
1. For household use only.
2. Class Ⅲ luminaire.
3.
Do not dispose of electrical appliances as unsorted municipal waste, use separatecollection
facilities. Contact your local government for information regarding the collection systems
vailable. If electrical appliances are disposed of in landfills or dumps, hazardous substances
can leak into the groundwater and get into the food chain, damaging your health and
well-being.
4. The LED module can not be replaced.
Do not disassemble the product. The light-emitting diode may cause damage to your eyes.
5.
Specs
Model: MJYD01YL
Net weight: ≈72g
Rated power: 0.25W
Operating temperature: -10 - +40°C
Dimensions: 84×84×36mm
Luminous flux: 0.7lm/3.8lm
Substances
Part
Pb Hg Cd
Cr(VI) PBB PBDE
PCB
Lamp coating
Lens
Back cover
This form is created in accordance with the SJ/T11364 standard.
The content of the hazardous substance in all homogenous materials of the
product is under the specified limitation of GB/T26572.
The content of the hazardous substance in at least one of the homogenous
materials of the product exceeds the limitation of GB/T26572.
Read this manual carefully before using the product.
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: 10-B4 Qingdao Innovation Park B, Qingdao, China
Loading...