Xiaomi Mitu Bunny, JMJQR01IQI Overview Manual
Mitu (Bunny) Block Robot
Robot assembly
1. Preparing for robot assembly
Sort separately all little details in special packaging for storage of robot units, big details
gather in separate boxes.
2. Blocks assembly
In compiling Mitu (Bunny) Block Robot follow the instructions or download the e-manual in
the «Block Robot» APP.
3. Checking of compiled robot
1) Before rst use fully charge the control unit.
2) Ensure an accuracy and strength of connection interfaces.
3) Make sure, that the direction of Mitu (Bunny) logos on motors corresponds to the
direction of control unit buttons.
4) Be sure you assembly the robot correctly.
Overview
Motor 1 Motor 2
Package for blocks
Overview
Number of blocks: 978 pcs.
Weight: 2500 g
Packing size: 380 x 320 x 95 mm.
The control unit
Special
adaptor
Instruction of
robot assembly
Block pack х8
1) Microphone;
2) Status indicator;
3) Power button;
4) Speaker;
1. Control unit
5) Ports of motors;
6) Port to data expansion;
7) Holes for assembly;
8) Reset button.
2. Adaptor
Steps to turning the robot on
Please do not use third-party adapter to recharge the unit.
The same charge through ports A, B, C, D.
During charging, light is red.
On full charging of device, light is green.
3. Motor
Gear axis
When the robot turning on, it`s necessary to pay attention to several points:
1. Select a space and a at surface.
2. Put robot to selected surface vertically.
3. Press the power button to turn on the device. Mitu (Bunny) Block Robot automatically
adjust the center of gravity and keep the balance.
Switching on: Press the power button.
Switching o: Press the power button and hold for 3 seconds until you hear the special
beep.
Assembly holes
Note: Before turning on, please place the unit as much as possible perpendicular to a
surface. In determining the center of gravity, and if you want a little support Mitu (Bunny)
Block Robot, to prevent falling. Mitu (Bunny) Block Robot automatically nds and holds a
balance.
Loading...