, the stylized X,
DocuPrint, and the identifying product names and numbers herein are trademarks
of Xerox Corporation. Xerox Canada Ltd. and Xerox Europe are licensees of all the
trademarks. Copyright protection claimed includes all forms and matters of
copyrightable materials and information now allowed by statutory or judicial law or
hereinafter granted, including without limitation material generated from the
software programs which are displayed on the screen such as icons, screen display
tools, etc. Product names used in this guide may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. All nonXerox brands and product names are trademarks or registered trademarks of their
respective companies.
Publication number: 721P56290
P1210UG-8 6/30/00 3:59 PM Page 1.1
TABLE OF CONTENTS
English
Thank you for purchasing the Xerox
DocuPrint P1210. In this guide you will
find information essential for setting up and
operating your laser printer.
TABLE OF CONTENTS
Unpacking1-2
Printer Components1-3
Connections1-4
Control Panel1-4
Cartridge Installation1-5
Loading Paper1-7
Installing Software1-9
Print Driver Features1-13
Multi-Purpose Tray Printing1-14
Printer Specifications1-16
Troubleshooting1-17
Installing Memory1-21
Getting More Information1-23
Printer Certifications1-24
Language Codes1-25
EN
FR
ES
PT
ZH
User Guide
1.1
OCU
P
RINT
P1210UG-8 6/30/00 3:59 PM Page 1.2
Unpacking
AC Power
Cord
PC Parallel
Cable
Included in some countries.
(meets IEEE 1284
specifications)
DocuPrint P1210
UNPACKING
Note: Carefully
remove any shipping
tape from the
printer.
Print
Cartridge
CD
User Guide
Note: The DocuPrint P1210 is equipped with a
parallel port for use with IBM Compatible
computers (with a 100mhz Pentium or higher
equivalent processor.) USB cable sold separately.
Note: Place the printer on a flat, stable surface
leaving 6 inches (15cm) around the printer and 1
foot (30cm) of space in front.
Do not place the printer in direct sunlight, near
heat sources or air conditioners, in dusty or dirty
environments, or near devices that contain
magnets or generate magnetic fields (such as
loud speakers or base units of cordless
telephones.)
1.2
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.3
PRINTER COMPONENTS
Front View
Control Panel
Top Tray
(Face Down Output)
Tray 1
Paper Level Indicator
Rear View
Top Cover
Multi-Purpose Tray
(Manual Feed)
Rear Cover/Rear Tray
(Face Up Output)
EN
FR
ES
USB Port
Parallel Port
Power Switch
Power Cord Connector
PT
ZH
User Guide
1.3
P1210UG-8 6/30/00 3:59 PM Page 1.4
CONNECTIONS/CONTROL PANEL
Connections
1
USB Cable
Connect cable.
(Sold separately)
or
Parallel Cable
Connect cable.
Caution: Turn off your computer
before connecting your printer
cable or power cord.
Control Panel
Error Light
Blinking: Insufficient memory
On: Cover open, cartridge not installed or
not seated properly
On with Paper Light: Paper jam
Paper Light
On: Out of Paper
On with Error Light: Paper jam
AC Power Cord
2
Connect to your printer to a
properly grounded outlet.
Turn the power on.
Manual Light
On: Multi-purpose tray
(manual feed) ready
Press print button to start job
Data Light
On: Ready to receive data
Slow blink: Receiving data
Fast blink: Printing
1.4
Cancel Button
To cancel print job, hold the cancel
button until all lights blink, then release.
Print Button
To print a Configuration Sheet, hold the print
button until all lights blink, then release.
User Guide
Note: When all lights are
blinking, this indicates a system
error. Turn the power off and
then back on to clear. If problem
persists, call your local Xerox
Helpline.
P1210UG-8 6/30/00 3:59 PM Page 1.5
CARTRIDGE INSTALLATION
Print Cartridge Installation
Open the top cover.
1
Remove the print cartridge from the bag.
Carefully remove the sealing tape from the
print cartridge.
2
Note: Do not expose cartridge to direct
sunlight or strong room light for more
than 10 minutes.
3
EN
FR
ES
PT
ZH
Note: Pull sealing tape completely out
of the cartridge.
User Guide
1.5
P1210UG-8 6/30/00 3:59 PM Page 1.6
CARTRIDGE INSTALLATION
4
5
Shake the print cartridge from side to side
to distribute the toner evenly.
Holding the print cartridge by the handle,
insert the cartridge into the printer until it
clicks into place.
1.6
User Guide
6
Close the top cover securely.
P1210UG-8 6/30/00 3:59 PM Page 1.7
LOADING PAPER
Loading Paper
Pull the paper tray out.
Caution: Do not remove tray while printing.
This may cause paper jams.
Press the bottom plate until it locks
into place.
Pinch the Rear Paper Guide and adjust to
the length of the print media.
1
2
3
Rear Paper
Guide
EN
FR
ES
For legal or folio size paper, press the tab
down and pull the rear wall all the way out,
to adjust tray length.
4
PT
ZH
User Guide
1.7
P1210UG-8 6/30/00 3:59 PM Page 1.8
LOADING PAPER
Note: Observe the maximum limit
indicator. Tray holds a maximum of 250
sheets of paper.
Load paper. Ensure that the paper is placed
5
beneath the metal corner guide. If using
pre-printed paper, load paper with the print
side facing down.
Side Guide
Adjust the Side Guide to lightly touch
6
the paper.
Insert the tray back into the printer.
7
1.8
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.9
INSTALLING SOFTWARE
Installing Software
The P1210 supports many operating systems
Please go to the section which corresponds
with your operating system for installation
instructions.
Installation for Windows 95, 98,
NT 4.0, 2000
1 Insert the Xerox DocuPrint P1210 CD into
your CD-ROM drive. If Windows runs your
CD automatically, skip to step 4.
2 Select Run from the Start menu.
3 Type d:\setup.exe (where “d” is your CD-
ROM drive letter), then click OK.
4 Select the appropriate language.
5 Select the Print Driver and follow the
on-screen instructions to install.
6 If desired, install RCP (Remote
Control Panel).
7 If connected to the printer by a USB
connection and using Windows 98, you will
need to install the USB Port Driver located
on the CD. Select your appropriate
language, then select USB Port Driver.
CD Contents
• Software Utilities
• Print Drivers
• Reference Guide
– Print Media Specifications
– Configuring the PCL Driver
– Setting Properties
– Driver Features
– Using Printer Utilities
– Solving Printing Problems
Note: RCP is a Windows-based program
that allows the user to set default printer
values.
Note: For Windows 98, the USB port
driver must be installed in order to print to
the DocuPrint P1210 via a USB
connection.
EN
FR
ES
PT
ZH
You are now ready to print from your PC.
User Guide
1.9
P1210UG-8 6/30/00 3:59 PM Page 1.10
INSTALLING SOFTWARE
Note: In order to print from your
Macintosh to the DocuPrint P1210, you
must be running OS 8.6x or higher
operating system and have a USB
enabled Macintosh.
CD Contents
• Print Driver
• Reference Guide
– Print Media Specifications
– Configuring the PCL Driver
– Setting Properties
– Driver Features
– Using Printer Utilities
– Solving Printing Problems
Installation for Macintosh
1 Insert the Xerox DocuPrint P1210 CD into
your CD-ROM drive.
2 Double click the P1210 CD.
3 Based on the table located in the back of
this guide, select your appropriate
language code (ie. “EN” for English).
4 Click on the folder Installer, and double
click the P1210 installer icon.
5 Click Continue then Install to install the
print driver.
6 After the driver is installed, select Quit to
finish installation or select Continue to
install the PostScript Printer Descriptions.
7 Go to the Chooser. Select the Xerox
Docuprint icon and then select Docuprint
P1210 in the scroll window. Close
the Chooser.
1.10
You are now ready to print to your
DocuPrint P1210 from your Macintosh.
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.11
INSTALLING SOFTWARE
Linux Installation
1 Log in to Linux as Super User (root)
account.
2 Insert the Xerox DocuPrint P1210 CD
into the CD-ROM drive.
3 Open a terminal window.
For Gnome interface users, (Utilities
GNOME terminal.)
4 Mount your CD-ROM and run a
script file:
mount -t iso9660 /dev/cdrom /mnt/ cdrom
cd /mnt/cdrom/en/linux
./install.sh
Note: these instructions are a guide to
installing the PCL5e driver for Linux. The
Linux driver installation script supports
RedHat 6.0 or greater.
5 Setup your print driver using printtool.
• Run the printtool program.
Run program... printtool, select Run.
If you get an error message, regarding
ncpfs, click Ignore to continue installing a
local printer.
• From the RedHat Linux Print System
Manager, select Add, Printer type:
Check mark Local printer, then click OK.
• An Auto-detection device dialogue box
should idicate that /dev/1p0 is “Detected”.
click OK.
• The Edit Local Print Entry dialogue box
should appear. Use the defaults, click
Select.
• For printer type, select Xerox DocuPrint
Series PCL5e Compatible, click OK.
EN
FR
ES
PT
ZH
User Guide
1.11
P1210UG-8 6/30/00 3:59 PM Page 1.12
INSTALLING SOFTWARE
Note: The P1210 is dependant upon the
native driver shipping with your Linux
RedHat OS. Therefore, the features and
functions listed in the table on the next
page may not all be available.
• On Edit Local Printer Entry dialogue
box, click OK.
6 At the end of installation, close
RedHat’s printtool by clicking “X” in the
upper right hand corner of the windows.
Your Xerox Printer will be the default printer
(lp) for printing. If printing a postscript (.ps)
file, use the lpr command to print. For
instance, if a print command for readme.pdf
generates a readme.ps file, open a terminal
window and type “lpr readme.ps” in order to
print this file.
1.12
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.13
PRINT DRIVER FEATURES
PCL Print Driver Features
Properties
Number of Copies
Paper Size
Paper Source
Paper Type
Image Quality
True Type Fonts
Toner Saver
Graphics Mode
Page Orientation
Usage /Description
Select 1-999 copies
Select from supported paper sizes
(See “Printer Specifications”).
Select Printing from Tray 1, MP Tray or
Tray 2 (if installed).
Select enhancement setting for graphical
and/or text printing.
Select font printing.
Select for draft mode printing.
Select vector or raster mode.
Select Portrait or Landscape.
Windows*
★
★
★
★
★
★
★
★
★
Mac
★
★
★
★
★
★
EN
FR
Manual 2 Sided printing
Multiple Up (Win)/
Layout (Mac)
Booklet Printing
Print two-sided documents.
Select 1-16 (Windows) or 1-4 (Mac)
images per physical page.
Create booklets from documents.
Page LayoutImage QualityPaper
Poster Printing
Fit to Page (Win)/
Scaling (Mac)
Watermarks
Note: Refer to the Reference Guide on your CD for more information.
*These features can be located under the Properties tab of your Print Menu.
†
The watermark feature for Macintosh can be located under Page Setup.
Create posters from documents.
Adjust image to fit to page size.
Create and use watermarks on documents.
★
★
★
★
★
★
ES
★
PT
ZH
★
†
★
User Guide
1.13
P1210UG-8 6/30/00 3:59 PM Page 1.14
MULTI-PURPOSE TRAY PRINTING
Note: When printing on certain envelopes,
heavier weight papers, trnsparencies, or
paper labels, manually feed them one at a
time through the Multi-Purpose tray.
Multi-Purpose Tray Printing
The Multi-Purpose Tray (Manual Feed) is to
be used as an alternate paper source for
printing onto special print media.
Pull open the Multi-Purpose Tray
1
(front panel).
Pull out the Multi-Purpose Tray Extension.
2
1.14
Multi-Purpose Tray
Extension
User Guide
Load print media against the left edge of
3
the tray then slide the width guide on the
right against the print media. Observe the
maximum limit indicator. Do not
overload tray.
P1210UG-8 6/30/00 3:59 PM Page 1.15
MULTI-PURPOSE TRAY PRINTING
Load envelopes, with the flap down, against
the left edge of the tray then slide the width
guide on the right against the envelopes.
Caution: Never use envelopes with clasps, snaps,
windows, coated linings, or self-stick adhesives.
These envelopes may severely damage the
printer. Do not feed stamped envelopes through
the printer.
When printing on special media, open the
rear output tray cover and pull out the paper
support extension.
4
Note:You can stack up to 100 sheets of
paper or 10 envelopes for automatic feeding.
5
EN
FR
ES
When you finish printing from the MultiPurpose Tray, push the support extensions
back in and close both covers.
6
PT
ZH
User Guide
1.15
P1210UG-8 6/30/00 3:59 PM Page 1.16
PRINTER SPECIFICATIONS
Printer Specifications
Item
Print Speed
Resolution
Output Capacity
Input Capacity
Power Rating
Acoustic Noise
Operating
Environment
Weight
External
Dimensions
Print Cartridge
Specification and Description
Up to 12ppm (A4/Letter)
True 600 x 600 dpi; 1200 dpi Resolution (Windows)
Face Down: 250 Sheets, Face Up: 100 Sheets
Tray 1: 250 sheets of paper (16 to 28lbs/60 to 105gsm)
MP Tray: 100 sheets of paper (16 to 53lbs/60 to 199gsm) or 10 envelopes
Option Tray 2: 550 sheets of paper (16 to 28lbs/60 to 105gsm)
AC100~128V/200V~240V, 50/60Hz
Standby: Less than 39dB; Operating: Less than 49dB
Temperature: 10~30˚C/ 50~90˚F; Humidity: 20~80%RH
14.9 Kg/ 32.8 lbs. (with packaging materials)
360(W) X 407(D) X 249(H)mm/ 14.2(W) X 16.1(D) X 9.8(H)in.
Laser Print Cartridge: Yield approximately 3,000 letter/A4 pages, 5% area
coverage (included with the printer) Reorder number: 106R441 (for Canada,
Europe, Middle East Africa and the US), 106R439 (for all other countries.)
High Yield Laser Print Cartridge: Yield approximately 6,000 letter/A4 pages, 5%
area coverage. Reorder number: 106R442 (for Canada, Europe, Middle East
Africa and the US), 106R440 (for all other countries.)
1.16
Emulation
Fonts
CPU
Memory
Interface
User Guide
PCL6, PCL5e, Epson; PostScript Level 3 (optional)
45 scalable (35 Intellifont,1 Bitmap, Euro)
66MHz, 32 bit RISC processor
Standard 4MB, Expandable to 68MB: (Installed into the slot labeled DRAM
Module) 72 pin, EDO, non-parity: 60ns. 8MB, 16MB, 32MB or 64MB
Bidirectional Parallel Standard (IEEE 1284)
–Modes supported: Compatible, Nibble, Byte, ECP
USB Interface Standard
–USB 1.0/1.1 compliant, 12Mbps, 1 port
P1210UG-8 6/30/00 3:59 PM Page 1.17
TROUBLESHOOTING
Troubleshooting
Problem
The printer does not print
Faded printing
Job did not completely print;
received an error sheet
Possible Cause
Data Light is not on.
Printer Cable is not connected
properly.
Error Light is on.
Paper Light and Error Light are on.
Paper Light is on.
Manual Light and Data Light are on.
Toner is low, time to replace the
print cartridge.
Out of memory
Things to try...
If the Data Light is off, check the power
switch and power source.
Check all connections. If using a parallel
cable, make sure the clips on the
connector are securely fastened.
Check to see that the print cartridge is
properly inserted in the machine.
Check to see if there is a paper jam.
Printer is out of paper; add paper.
Printer is in manual feed mode and is
waiting for paper to be fed through the
MP Tray.
Remove the print cartridge and shake it
gently to evenly distribute the remaining
toner, then reinsert the cartridge or insert
a new print cartridge.
Reduce the complexity of the print job;
Do not send the entire job to the printer,
instead print it in sections, i.e., pp 1-5,
pp 6-10, etc.; Reduce the print resolution,
i.e., from 1200 dpi to 600 dpi; Add a
minimum of 8MB of additional memory.
EN
FR
ES
PT
Printed page has some
missing characters or data
Difficulties printing via
the parallel port
(Windows users)
Illegal Operation Error
Message
Differences in vector mode vs. raster
mode
Printer is not directly connected to
the PC
Print Driver error
In PCL driver, change your Image
Quality mode to raster and select text
mode: download as bitmap image.
If you have any intermediate device
between PC and printer, please remove
device and connect printer directly to PC.
Report error to your local support
organization.
Note: For more troubleshooting tips, please refer to the electronic Reference Guide, which is
available on the product CD provided with your printer.
User Guide
ZH
1.17
P1210UG-8 6/30/00 3:59 PM Page 1.18
TROUBLESHOOTING
Note: On the rare occasion you encounter
a paper jam, the following instructions
will assist you in clearing the jam.
Clearing Paper Jams Inside
the Printer
Open the top cover and remove the print
1
cartridge. Once the print cartridge is
removed from the printer, be careful not to
expose it to heat or direct sunlight.
Carefully lift up the guide feed and gently
2
remove jammed paper. After removing
jammed paper, flip down the guide feed.
1.18
User Guide
Replace the print cartridge and close the
3
top cover. Printing will resume.
P1210UG-8 6/30/00 3:59 PM Page 1.19
TROUBLESHOOTING
Clearing Paper Jams in
the Output Area
If the paper is almost completely visible,
gently pull paper to remove.
If the jammed paper is not visible or there
is resistance when you pull the paper, open
the rear cover. Detach the vinyl strip and
press the rear cover down until the plastic
clips of the tray snap out.
1
2
EN
FR
ES
Note: Please detach the vinyl strap prior
to pushing down the rear cover.
If there is still resistance when you try to
remove the paper, pinch the Handle and
release the exit roller.
3
PT
ZH
Handle
User Guide
1.19
P1210UG-8 6/30/00 3:59 PM Page 1.20
TROUBLESHOOTING
Gently remove the jammed paper. Refer to
4
“Clearing Paper Jams Inside the Printer” if
unable to remove the paper.
Replace and secure the exit roller and
5
reattach the vinyl strap. Close the rear cover.
Open and close the top cover to resume
printing.
Clearing Paper Jams in
the Input Area
Pull out the paper tray.
1
Gently remove jammed paper.
2
Slide the tray back into the printer. Open
3
and close the top cover to resume printing.
1.20
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.21
INSTALLING OPTIONAL MEMORY
Installing Optional Memory
Caution: The controller board and internal
options are sensitive to static electricity.
Before installing or removing an internal
option, discharge static electricity from your
body by touching something metal, such as a
metal plate on a device connected to a
grounded outlet.
Note: For users who plan to run complex
print jobs or print a majority of print jobs
at 1200dpi, a minumum of 8MB of
additional memory is recommended.
Memory needs to be purchased separately.
(RAM Specifications: 72 pin, EDO, nonparity: 60ns.)
Go to the back of the printer. Turn the
printer off and disconnect the power cord
and printer cable.
Remove the two outer screws and the
control board cover.
Install the memory SIMM, at a slight angle,
into the slot labeled “DRAM Module”.
1
2
EN
FR
ES
PT
3
ZH
User Guide
1.21
P1210UG-8 6/30/00 3:59 PM Page 1.22
INSTALLING OPTIONAL MEMORY
Push back on the SIMM until it clicks into
4
place. (Make sure the SIMM is secured in
place by the metal clips.)
Replace the side cover and tighten the two
5
outer screws.
1.22
User Guide
Reconnect the power cord and printer cable.
6
Turn the power on.
Print a configuration sheet (hold down the
7
print button until all lights blink, then
release). Confirm the new memory value
on your sheet.
P1210UG-8 6/30/00 3:59 PM Page 1.23
GETTING MORE INFORMATION
Detailed information for your DocuPrint
P1210 is in the electronic Reference Guide,
which is available on the product CD
provided with your printer. The Reference
Guide is provided in the following
languages: English (EN), French (FR),
Italian (IT), German (DE), Spanish (ES),
Portuguese (PT), Dutch (NL), Russian
(RO), and Simplified Chinese (ZH).
The Windows PCL6 driver provided with
your printer has many specialized print
features, like Watermarks and multiple-up
printing. To learn more about these features,
please access the on-line Help available
through the Xerox DocuPrint P1210 PCL6
driver. To access the on-line help, just click
the ‘Help’ button located on the lower right
hand corner of the driver window. For
Macintosh users, information concerning
print driver features can be found in the
Reference Guide located on the P1210 CD.
CD Contents
• Software Utilities
• Print Drivers
• Reference Guide (found in the folder
labeled Docs)
– Print Media Specifications
– Configuring the PCL Driver
– Setting Properties
– Driver Features
– Using Printer Utilities
– Solving Printing Problems
EN
Drivers are available on our website. Please
visit www.xerox.com and select "Get
Drivers and Utilities."
For support and service, refer to your
warranty pack for local contacts. Additional
information can be found at www.xerox.com.
FR
ES
PT
ZH
User Guide
1.23
P1210UG-8 6/30/00 3:59 PM Page 1.24
PRINTER CERTIFICATIONS
Laser Safety
The Xerox DocuPrint P1210 complies with safety standards, and is certified as a Class 1 Laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control
for Health and Safety Act of 1968. The printer does not emit hazardous laser radiation.The use of controls, adjustments,
or procedures other than those specified in the documentation might result in hazardous exposure to
laser light.
(European Union) Declaration of Conformance
The CE marking applied to this product symbolizes Xerox Ltd. Declaration of Conformity with the following applicable
Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EC amended by Council Directive 93/68/EC, on the harmonization of the laws
of the Member States related to equipment designated for use within certain voltage limits.
January 1, 1996: Council Directive 89/336/ED, approximation of the laws of the member states related to electromagnetic
compatibility. When applicable
March 9, 1999; Council Directive 99/5/EC, on the harmonization of the laws of the Member States related to radio and
telecommunications terminal equipment.
A full declaration, defining the relevant Directives and referenced standards can be obtained from your Xerox Ltd.
representative.
WARNING: Changes or modifications to this equipment not specifically approved by Xerox Europe may void the user’s
authority to operate this equipment.Shielded cables must be used with this equipment to maintain compliance with the
EMC Directive (89/336/EEC).
WARNING: In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM)
equipment, the external radiation from ISM equipment may have to be limited or special mitigation measures taken.
Australia and New Zealand
Changes or modifications to this equipment not specifically approved by Fuji Xerox Australia Pty. Limited may void the
user’s authority to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with
the Radiocommunications Act 1992.
1.24
Radio Frequency Emissions
United States and Canada
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not specially approved by Xerox Corporation may void the authority granted
by the FCC to operate this equipment. Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.In order to allow this equipment to operate in proximity to Industrial, Scientific and Medical (ISM)
equipment, the external radiation from ISM equipment may have to be limited or special migration measures taken.
User Guide
P1210UG-8 6/30/00 3:59 PM Page 1.25
LANGUAGE CODES
Language Codes
Code
(XX)
Language
BG
CS
DA
DE
EL
EN
ES
ET
FI
FR
HE
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SH
SK
SL
SV
TR
ZH
Bulgarian
Czech†
Danish†
German*
Greek
English*
Spanish*
Estonian
Finnish†
French*
Hebrew
Hungarian†
Italian*
Lithuanian
Latvian
Dutch†
Norwegian†
Polish†
Portuguese*
Romanian†
Russian†
Croatian
Slovakian
Slovenian
Swedish†
Turkish
Chinese†
EN
FR
ES
PT
ZH
* Macintosh and Windows print drivers available.
†Windows print driver available
User Guide
1.25
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.