Xerox 8860 E User Manual

Product Safety Data Sheet

Phaser 8860

Page 1 of 2

_________________________________________________________________________

PRODUCT DESCRIPTION

Phaser 8860 Color Solid Ink Printer

MANUFACTURER INFORMATION

XEROX Corporation P.O. Box 1000 Wilsonville, Oregon 97070-1000, U.S.A.

PRODUCT DIMENSIONS

Depth Width Height

Phaser 8860 DN 53.3 cm / 21 inches 40.6 cm / 16.0 inches 36.8 cm / 14.5 inches

WEIGHT

28 kg / 60 lbs

ELECTRICAL INFORMATION

Voltage (Volts) Frequency (Hertz) Current (Amps)

PRODUCT SAFETY CERTIFICATION

Standard Certifying Body Low Voltage Directive

CB Report & Certificate

CSA Report

ELECTROMAGNETIC COMPATIBILITY CERTIFICATION

Standard Certifying Body

EMC Directive

EMC Report

100-240 Vac

50/60 Hz

10-5 A

• 2006/95/EC

• IEC 60950-1:2001 (1

• EN 60950-1:2001

• UL 60950-1:2003, 1st Edition

• CSA 60950-1-03, 1

Edition)

Edition

XEROX Office Group

CSA International

• 2004/108/EC

• FCC Part 15, Class A

• EN 55022:1998 +A1:2000 +A2:2003,

Class A

• EN 61000-3-2:2000 +A2:2005

• EN 61000-3-3:1995 +A1:2001

• EN 55024:1998 +A1:2001 +A2:2003

XEROX Office Group

Product Safety Data Sheet

Phaser 8860

Page 2 of 2

_______________________________________________________________________________

POWER CONSUMPTION

Off Mode (W) Power Save (W)

0.3 45.7 103.1 227.1

115 V

Standby (W) Run Mode (W)*

230 V

Off Mode (W) Power Save (W) Standby (W) Run Mode (W)*

0.9 45.9 104.3 239.1

*Hourly rate extrapolated (color default simplex printing).

HEAT OUTPUT

115 V

Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)*

1.0 156.0 351.9 775.0

230 V

Off Mode (BTU/hr) Power Save (BTU/hr) Standby (BTU/hr) Run Mode (BTU/hr)*

3.1 156.7 356.0 815.9

*Hourly rate extrapolated (color default simplex printing). NOTE: The electrical power information provided should not be used to define the electrical support required for this product.

Consult your Xerox representative if you require detailed information.

ENVIRONMENTAL LIMITATIONS

Relative Humidity (%) Ambient Temperature (ºC/ºF)

Operating

10% - 80% 10ºC to 32ºC / 50ºF to 90ºF

LIGHT SOURCE

Not applicable

AUDIBLE NOISE

Declared noise emissions in accordance with ISO 9296:1988(E):

Idling Operating

(Enhanced Mode)

LWAd (1B=10dB)

Bystander Position (1.0 m) LpAm = 30 dB (A) LpAm = 56 dB (A)

LWAd = 4.4 B (A) LWAd = 7.2 B (A)

CHEMICAL EMISSIONS

Measured Product Concentration

Ozone

Styrene

Particles (Dust)

2 ppb (0.004 mg/m³)

Not detected Not detected

OZONE FILTER REPLACEMENT

Not applicable