The Xerox Wide Format Stacker is designed and tested to meet strict safety requirements.
These requirements include safety agency examination and approval and compliance to any
established environmental standards. Please read the following instructions before operating
the Stacker.
NOTE: In order to ensure the safe operation of your Stacker, always refer to the instructions in
this document.
FOLLOW all of the warning and instructions which are marked on or supplied with the product.
UNPLUG the Stacker from the wall outlet before cleaning. Always use materials which are
supplied or approved by Xerox. The use of other materials may result in poor performance and
could create a hazardous situation.
1
DO NOT use aerosol cleaners.
NEVER use supplies or cleaning materials for any purposes other than what they are intended.
Keep all supplies and materials out of the reach of children.
DO NOT use the Stacker near water, wet locations, or outdoors.
THIS PRODUCT is equipped with a three-wire, grounding-type plug (in other words a plug
which has a third grounding pin). This product is also equipped with an additional safety
device. The plug fits into a grounding-type power outlet only. This is a safety feature. If you
are unable to insert the plug into the outlet, contact an electrician in order to avoid the risk of
electric shock and have the receptacle replaced. Never use a ground adapter plug to connect
the Stacker to a power source receptacle which lacks a ground connection terminal.
THIS PRODUCT must be operated from the type of power source which is indicated on the
marking label. If you are not sure of the type of power available, consult your local power
company.
IF AN EXTENSION CORD is used with this Stacker, ensure that the total of the ampere ratings
of any products plugged into the extension cord does not exceed the extension cord ampere
rating. Also, ensure that the total amperage of all products plugged into the wall outlet does
not exceed the outlet protection.
DO NOT install the Stacker in a direct sunlit area, in a high humidity or dusty environment, or
in a double-insulated room.
DO NOT install the Stacker where the floor or base is unstable. The Stacker may fall, causing
personal injury and/or serious damage to the Stacker.
NEVER spill liquid of any kind on the Stacker.
Wide Format Stacker User Guide 1
Safety Notes
DO NOT allow anything to rest on the power cord. Do not locate this Stacker where people
can step on the power cord.
NEVER remove any cover or guards that require a tool for removal. There are no operator
serviceable areas within the covered areas.
THE POWER SUPPLY CORD is the disconnect device for this Stacker. Ensure that the Stacker
is installed near the outlet and is easily accessible in the event that power needs to be removed
from the Stacker quickly.
NEVER attempt any function that is not specified in this User Guide or is not directed by an
authorized Xerox representative.
UNPLUG this Stacker from the wall outlet and refer the servicing of it to qualified service
personnel under the following conditions:
• When the power cord is damaged or frayed
• If liquid is spilled into the product
• If the Stacker is exposed to rain or water
• If the Stacker is producing unusual noises or odors
• If the Stacker falls over or the covers are damaged
• If the Stacker continues to malfunction or not work after the procedures in this User Guide
are performed.
2 Wide Format Stacker User Guide
2 Stacker Overview
Introduction
The Stacker is a wire-form, motorized, stacking device, mounted on a stand, designed to
handle printed output. It can stack various media types including Bond and Film media.
2
Figure 1. Wide Format Stacker
The Stacker is designed to be operated with minimal operator interaction and requires no
maintenance. The operator can clear any media jam without the use of tools. A Power / Jam
LED indicates operational status and is also used to diagnose problems with the Stacker. The
Stacker stand has casters to enable it to roll away easily from the printer clear jams. Table 1
list the Stacker operating specifications.
Wide Format Stacker User Guide 3
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.